Problem sending fax

[Philip <phlist@addis.net>]

Im trying to send a fax using HylaFax 4.0.
I am running linux 2.0.26. Using USR 28.8 Modem
Hylafax connects to the fax machine after about 3 dials then
it communicates sits there for a few mins and disconnects.
I look at the log and it appears as though senfax stops sending
information just after it sends the header of the fax, then it trys to
redial the number...during the transfer.  I have included the log of 
the transfer.  Could someone help me out if you have had this problem
before or know how to solve it? Thank you in advance
Philip Kulp

Mar 15 23:26:53.69: [  859]: SESSION BEGIN 00000048 1301585xxxx329
Mar 15 23:26:53.69: [  859]: SEND FAX: JOB 7 DEST 585xxxx.fax COMMID
00000048
Mar 15 23:26:53.69: [  859]: DELAY 2600 ms
Mar 15 23:26:56.30: [  859]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Mar 15 23:26:56.44: [  859]: --> [2:OK]
Mar 15 23:26:56.44: [  859]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Mar 15 23:26:56.58: [  859]: --> [2:OK]
Mar 15 23:26:56.58: [  859]: <-- [14:AT+FCLASS=2.0\r]
Mar 15 23:26:56.72: [  859]: --> [2:OK]
Mar 15 23:26:56.72: [  859]: <-- [9:AT+FLO=2\r]
Mar 15 23:26:56.91: [  859]: --> [2:OK]
Mar 15 23:26:56.92: [  859]: <-- [9:AT+FPP=0\r]
Mar 15 23:26:57.05: [  859]: --> [2:OK]
Mar 15 23:26:57.05: [  859]: <-- [9:AT+FBO=0\r]
Mar 15 23:26:57.19: [  859]: --> [2:OK]
Mar 15 23:26:57.19: [  859]: <-- [10:AT+FCT=30\r]
Mar 15 23:26:57.33: [  859]: --> [2:OK]
Mar 15 23:26:57.33: [  859]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 15 23:26:57.47: [  859]: --> [2:OK]
Mar 15 23:26:57.47: [  859]: <-- [9:AT+FIE=0\r]
Mar 15 23:26:57.61: [  859]: --> [2:OK]
Mar 15 23:26:57.61: [  859]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Mar 15 23:26:57.75: [  859]: --> [2:OK]
Mar 15 23:26:57.75: [  859]: <-- [5:ATM1\r]
Mar 15 23:26:57.89: [  859]: --> [2:OK]
Mar 15 23:26:57.89: [  859]: <-- [14:AT+FCLASS=2.0\r]
Mar 15 23:26:58.13: [  859]: --> [2:OK]
Mar 15 23:26:58.13: [  859]: <-- [9:AT+FLO=2\r]
Mar 15 23:26:58.37: [  859]: --> [2:OK]
Mar 15 23:26:58.37: [  859]: <-- [9:AT+FPP=0\r]
Mar 15 23:26:58.61: [  859]: --> [2:OK]
Mar 15 23:26:58.61: [  859]: <-- [9:AT+FBO=0\r]
Mar 15 23:26:58.85: [  859]: --> [2:OK]
Mar 15 23:26:58.85: [  859]: <-- [10:AT+FCT=30\r]
Mar 15 23:26:59.09: [  859]: --> [2:OK]
Mar 15 23:26:59.09: [  859]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 15 23:26:59.33: [  859]: --> [2:OK]
Mar 15 23:26:59.33: [  859]: <-- [9:AT+FIE=0\r]
Mar 15 23:26:59.57: [  859]: --> [2:OK]
Mar 15 23:26:59.57: [  859]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Mar 15 23:26:59.81: [  859]: --> [2:OK]
Mar 15 23:26:59.81: [  859]: <-- [15:AT+FLI="Email"\r]
Mar 15 23:27:00.05: [  859]: --> [2:OK]
Mar 15 23:27:00.13: [  859]: DIAL 585xxxx329
Mar 15 23:27:00.13: [  859]: <-- [15:ATDT585xxxx329\r]
Mar 15 23:27:23.31: [  859]: --> [4:+FCO]
Mar 15 23:27:26.37: [  859]: --> [37:+FNF:^[+FCI:"         
3015856831"^T+FI]
Mar 15 23:27:26.37: [  859]: REMOTE NSF "^[+FCI:"         
3015856831"^T+FI"
Mar 15 23:27:26.37: [  859]: --> [20:´^?öôìª^?^?^? ^ADüþ^Îsº^?^?^?]
Mar 15 23:27:26.37: [  859]: --> [2:OK]
Mar 15 23:27:26.37: [  859]: REMOTE HANGUP: Unspecified Transmit Phase B
error(code 20)
Mar 15 23:27:26.37: [  859]: SEND FAILED: Unspecified Transmit Phase B
error
Mar 15 23:27:26.37: [  859]: <-- [5:ATH0\r]
Mar 15 23:27:26.61: [  859]: --> [2:OK]
Mar 15 23:27:26.61: [  859]: SESSION END