Re: Take 2: Can't receive incoming faxen [more info in msg.]

[Carsten Hoeger <choeger@suse.de>]

On Wed, 22 Jan 1997, Alan M. McKenney wrote:

>     I just set up HylaFAX on my system, and can't get it to receive
> faxes.  It sends faxes, and handles incoming and outgoing data calls
> OK.  But incoming faxes fail with a hangup just after the connection
> is made.
> 
> Computer:  75 MHz Pentium system, OEM = Intel.
> OS:        Linux 1.2.13.  
> 	(System purchased from VAResearch w/ Linux installed.)
> 
> Version of HylaFAX: v4.0pl1
> Modem: SupraFAXmodem 144LC
> 	Hylafax thinks it's a: Rockwell RC32ACL Class 2.
> 	ATI3 returns: V1.400-C05-CS29
> 	AT+FCLASS=? returns: 0,1,2
> 
> We tried sending me faxes from 2 different machines, and changing
> the initial baud rate.  Unfortunately, the manual for my fax modem
> has *no* documentation on any fax commands.  Anyway, the logs
> are identical, except for date/time.
> 
> Everything else worked without a hitch the first time.
> 
> 
> Here is the log for one of these unsuccessful calls
> (for obvious reasons, I have replaced my modem's # with # signs):
> 
> Jan 20 14:54:58.40: [   67]: SESSION BEGIN 00000009 ###########
> Jan 20 14:54:58.49: [   67]: <-- [4:ATA\r]
> Jan 20 14:55:10.57: [   67]: --> [3:FAX]
> Jan 20 14:55:13.88: [   67]: --> [7:CONNECT]
> Jan 20 14:55:13.89: [   67]: ANSWER: FAX CONNECTION
> Jan 20 14:55:13.97: [   67]: RECV FAX: begin
> Jan 20 14:55:19.79: [   67]: --> [5:ERROR]
> Jan 20 14:55:19.89: [   67]: REMOTE HANGUP: Unspecified Receive Phase B error (code 70)
> Jan 20 14:55:19.90: [   67]: RECV FAX: Unspecified Receive Phase B error
> Jan 20 14:55:19.92: [   67]: RECV FAX: end
> Jan 20 14:55:19.93: [   67]: SESSION END

I had the same problem with an USRobotics-Modem.
I solved it by reducing the DTE/DCE-Rate to 19200 bps...

mfG,
	Carsten Hoeger
------
Carsten Hoeger  - S.u.S.E. GmbH -  Gebhardtstr. 2  -  90762 Fuerth  -  Germany
fon +49-911-740530     -    fax +49-911-3206727    -    mailbox +49-911-3247122