Can't receive incoming faxes.

[mckenney@cmcl3.cims.nyu.edu (Alan M. McKenney)]

    I just set up HylaFAX on my system, and can't get it to receive
faxes.  It sends faxes, and handles incoming and outgoing data calls
OK.  But incoming faxes fail with a hangup just after the connection
is made.

Computer:  75 MHz Pentium system, OEM = Intel.
OS:        Linux 1.2.13.  
	(System purchased from VAResearch w/ Linux installed.)

Version of HylaFAX: v4.0pl1
Modem: SupraFAXmodem 144LC
	Hylafax thinks it's a: Rockwell RC32ACL Class 2.
	ATI3 returns: V1.400-C05-CS29
	AT+FCLASS=? returns: 0,1,2

We tried sending me faxes from 2 different machines, and changing
the initial baud rate.  Unfortunately, the manual for my fax modem
has *no* documentation on any fax commands.  Anyway, the logs
are identical, except for date/time.

Everything else worked without a hitch the first time.


Here is the log for one of these unsuccessful calls
(for obvious reasons, I have replaced my modem's # with # signs):


Jan 17 10:16:40.75: [ 7763]: SESSION BEGIN 00000003 ###########
Jan 17 10:16:40.76: [ 7763]: <-- [4:ATA\r]
Jan 17 10:16:42.33: [ 7763]: --> [3:FAX]
Jan 17 10:16:45.61: [ 7763]: --> [7:CONNECT]
Jan 17 10:16:45.61: [ 7763]: ANSWER: FAX CONNECTION
Jan 17 10:16:45.61: [ 7763]: RECV FAX: begin
Jan 17 10:16:51.25: [ 7763]: --> [5:ERROR]
Jan 17 10:16:51.25: [ 7763]: REMOTE HANGUP: Unspecified Receive Phase B error (code 70)
Jan 17 10:16:51.25: [ 7763]: RECV FAX: Unspecified Receive Phase B error
Jan 17 10:16:51.25: [ 7763]: RECV FAX: end
Jan 17 10:16:51.25: [ 7763]: SESSION END


    Any ideas why this is happening?


Alan McKenney        E-mail:  mckenney@cims.nyu.edu         (INTERNET)
Guest at: Courant Institute,NYU,USA