Personal tools
HylaFAX The world's most advanced open source fax server

FreeBSD Start Guide

Revision as of 05:36, 17 February 2013 by 59.167.128.11 (talk) (Update references to ghostscipt8 -> ghostscript9 & Add 'Notes' section)

FreeBSD Hylafax Quick Install

We need to install following ports:

  • print/ghostscript9-nox11
  • shells/bash
  • comms/hylafax


cd /usr/ports/print/ghostscript9-nox11
make install clean

cd /usr/ports/shells/bash 
make install clean

cd /usr/ports/comms/hylafax 
make install clean

Configuration

  • run hylafax setup:
/usr/local/sbin/faxsetup
  • run modem setup for each modem

( serial port : COM1=cuau0, COM2=cuau1 )

/usr/local/sbin/faxaddmodem

Autorun

to make sure the hylafax start with system edit /etc/rc.conf and add:

hylafax_enable="YES"


Information

  • config directory : /var/spool/hylafax/etc
  • configuration file for cuau0 modem : config.cuau0

Notes

FreeBSD 8.0 [amd64, i386] The uart(4) driver is now the default driver for serial port devices in favor of the sio(4) driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.



Powered by MediaWiki
Attribution-ShareAlike 2.5

Project hosted by iFAX Solutions