Personal tools
HylaFAX The world's most advanced open source fax server

Difference between revisions of "FreeBSD Start Guide"

(Remove FreeBSD 8.x and 'Current version' specifics because things become stale quick, confusing users)
(Configuration)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
==FreeBSD Hylafax quick install==
+
==FreeBSD Hylafax Quick Install==
  
 
We need to install following ports:
 
We need to install following ports:
*/print/ghostscript8-nox11
+
*print/ghostscript9-nox11
*/shells/bash  
+
*shells/bash  
*/comms/hylafax
+
*comms/hylafax
  
  
  cd /usr/ports/print/ghostscript8-nox11
+
  cd /usr/ports/print/ghostscript9-nox11
 
  make install clean
 
  make install clean
 
   
 
   
Line 23: Line 23:
 
( serial port : COM1=cuau0, COM2=cuau1 )
 
( serial port : COM1=cuau0, COM2=cuau1 )
 
  /usr/local/sbin/faxaddmodem
 
  /usr/local/sbin/faxaddmodem
 +
 +
*connecting whit Modem port
 +
/etc/ttys
 +
adding line:
 +
cuau0  "/usr/local/sbin/faxgetty /dev/cuau0"  dialup  on
  
 
==Autorun==
 
==Autorun==
Line 33: Line 38:
 
*configuration file for cuau0 modem : config.cuau0
 
*configuration file for cuau0 modem : config.cuau0
  
 +
==Notes==
  
 
FreeBSD 8.0 [amd64, i386] The uart(4)  driver is now the default driver for serial port devices in favor of the sio(4)  driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.
 
FreeBSD 8.0 [amd64, i386] The uart(4)  driver is now the default driver for serial port devices in favor of the sio(4)  driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.

Latest revision as of 09:27, 4 January 2016

FreeBSD Hylafax Quick Install

We need to install following ports:

  • print/ghostscript9-nox11
  • shells/bash
  • comms/hylafax


cd /usr/ports/print/ghostscript9-nox11
make install clean

cd /usr/ports/shells/bash 
make install clean

cd /usr/ports/comms/hylafax 
make install clean

Configuration

  • run hylafax setup:
/usr/local/sbin/faxsetup
  • run modem setup for each modem

( serial port : COM1=cuau0, COM2=cuau1 )

/usr/local/sbin/faxaddmodem
  • connecting whit Modem port

/etc/ttys adding line: cuau0 "/usr/local/sbin/faxgetty /dev/cuau0" dialup on

Autorun

to make sure the hylafax start with system edit /etc/rc.conf and add:

hylafax_enable="YES"


Information

  • config directory : /var/spool/hylafax/etc
  • configuration file for cuau0 modem : config.cuau0

Notes

FreeBSD 8.0 [amd64, i386] The uart(4) driver is now the default driver for serial port devices in favor of the sio(4) driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.


This page was last edited on 4 January 2016, at 09:27.

Powered by MediaWiki
Attribution-ShareAlike 2.5

Project hosted by iFAX Solutions