Personal tools
HylaFAX The world's most advanced open source fax server

Difference between revisions of "FreeBSD Start Guide"

(Configuration)
(Configuration)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==FreeBSD 7.2 Hylafax quick install==
+
==FreeBSD Hylafax Quick Install==
  
 
We need to install following ports:
 
We need to install following ports:
*/print/ghostscript8-nox11
+
*print/ghostscript9-nox11
*/shells/bash  
+
*shells/bash  
*/comms/hylafax (current version hylafx-6.0.2)
+
*comms/hylafax
  
  
  cd /usr/ports/print/ghostscript8-nox11
+
  cd /usr/ports/print/ghostscript9-nox11
 
  make install clean
 
  make install clean
 
   
 
   
Line 21: Line 21:
  
 
*run modem setup for each modem
 
*run modem setup for each modem
( serial port : COM1=cuad0, COM2=cuad1 )
+
( serial port : COM1=cuau0, COM2=cuau1 )
 
  /usr/local/sbin/faxaddmodem
 
  /usr/local/sbin/faxaddmodem
 +
 +
*connecting whit Modem port
 +
/etc/ttys
 +
adding line:
 +
cuau0  "/usr/local/sbin/faxgetty /dev/cuau0"  dialup  on
  
 
==Autorun==
 
==Autorun==
Line 31: Line 36:
 
==Information==
 
==Information==
 
*config directory : /var/spool/hylafax/etc <br>  
 
*config directory : /var/spool/hylafax/etc <br>  
*configuration file for cuad0 modem : config.cuad0
+
*configuration file for cuau0 modem : config.cuau0
 +
 
 +
==Notes==
 +
 
 +
FreeBSD 8.0 [amd64, i386] The uart(4)  driver is now the default driver for serial port devices in favor of the sio(4)  driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.

Latest revision as of 09:27, 4 January 2016

FreeBSD Hylafax Quick Install

We need to install following ports:

  • print/ghostscript9-nox11
  • shells/bash
  • comms/hylafax


cd /usr/ports/print/ghostscript9-nox11
make install clean

cd /usr/ports/shells/bash 
make install clean

cd /usr/ports/comms/hylafax 
make install clean

Configuration

  • run hylafax setup:
/usr/local/sbin/faxsetup
  • run modem setup for each modem

( serial port : COM1=cuau0, COM2=cuau1 )

/usr/local/sbin/faxaddmodem
  • connecting whit Modem port

/etc/ttys adding line: cuau0 "/usr/local/sbin/faxgetty /dev/cuau0" dialup on

Autorun

to make sure the hylafax start with system edit /etc/rc.conf and add:

hylafax_enable="YES"


Information

  • config directory : /var/spool/hylafax/etc
  • configuration file for cuau0 modem : config.cuau0

Notes

FreeBSD 8.0 [amd64, i386] The uart(4) driver is now the default driver for serial port devices in favor of the sio(4) driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.


This page was last edited on 4 January 2016, at 09:27.

Powered by MediaWiki
Attribution-ShareAlike 2.5

Project hosted by iFAX Solutions