Personal tools
HylaFAX The world's most advanced open source fax server

Difference between revisions of "FAQ"

(Notification messages with other languages (I18N))
 
(43 intermediate revisions by 25 users not shown)
Line 13: Line 13:
 
Sam Leffler, while working at [http://www.sgi.com Silicon Graphics] (SGI), wrote a fax server for SGI's IRIX servers called FlexFAX and released it to the public in 1991. Sam and others worked for several years on FlexFAX, adding new features and porting the software to new platforms. In 1995 FlexFAX was renamed HylaFAX to avoid potential trademark issues. Sam eventually decided to leave the project to pursue other interests which, even with the best intentions of the HylaFAX developers, caused development to slow dramatically. In 1998 HylaFAX development was revitalized by the creation of hylafax.org, a central repository for HylaFAX development, downloads, documentation, etc. and the project remains very active to this day.
 
Sam Leffler, while working at [http://www.sgi.com Silicon Graphics] (SGI), wrote a fax server for SGI's IRIX servers called FlexFAX and released it to the public in 1991. Sam and others worked for several years on FlexFAX, adding new features and porting the software to new platforms. In 1995 FlexFAX was renamed HylaFAX to avoid potential trademark issues. Sam eventually decided to leave the project to pursue other interests which, even with the best intentions of the HylaFAX developers, caused development to slow dramatically. In 1998 HylaFAX development was revitalized by the creation of hylafax.org, a central repository for HylaFAX development, downloads, documentation, etc. and the project remains very active to this day.
  
So, to answer the question: HylaFAX, nee FlexFAX, was born of Sam Leffler and through the hard work and contributions of many, many people has grown to become what it is today.
+
So, to answer the question: HylaFAX, nee FlexFAX, was born of Sam Leffler and through the hard work and contributions of many other people, has grown to become what it is today.
  
Some old newgroup postings that may be of interest:
+
Some old newsgroup postings that may be of interest:
  
 
[http://groups.google.com/group/comp.dcom.fax/browse_thread/thread/2be4f5c7d724035f/507896d35deffc53?lnk=st&q=sam+leffler+flexfax&rnum=16&hl=en#507896d35deffc53 Original FlexFAX announcement] (mirrored [[FlexFAX Announcement|here]])
 
[http://groups.google.com/group/comp.dcom.fax/browse_thread/thread/2be4f5c7d724035f/507896d35deffc53?lnk=st&q=sam+leffler+flexfax&rnum=16&hl=en#507896d35deffc53 Original FlexFAX announcement] (mirrored [[FlexFAX Announcement|here]])
Line 50: Line 50:
  
 
===How to tell which HylaFAX version you have?===
 
===How to tell which HylaFAX version you have?===
If you have need to refer to this specific software, you should identify it as:
+
If you need to refer to this specific software, you should identify it as:
  
 
HylaFAX v<version><n>
 
HylaFAX v<version><n>
Line 104: Line 104:
 
==Building From Source and Installation==
 
==Building From Source and Installation==
  
<p><font size="-1">Note: This is a c/p from [http://www.hylafax.org/building.html http://www.hylafax.org/building.html], converted to Wikitext markup by [http://www.katrinahelp.info/rdata/people/convertHtmlToWiki http://www.katrinahelp.info/rdata/people/convertHtmlToWiki] and with some minor edits which jumped out at me.  Revise as you see fit... at least this section isn't blank anymore!  08:36, 8 March 2008 (EST)</font></p>
 
 
'''BUILDING HYLAFAX FROM SOURCE CODE'''
 
 
----
 
 
This chapter contains the information needed to configure and build HylaFAX from the source distribution. The following sections are available here:
 
 
* [[#Before|Before You Start]]
 
* [[#Building|The Build Procedure]]
 
* [[#BuildTrees|Build Trees]]
 
* [[#ConfigFiles|Configuration Files]]
 
* [[#Packages|Configuring Packages]]
 
* [[#HTML|Configuring the HTML Documentation]]
 
* [[#Upgrading|Upgrading From FlexFAX]]
 
* [[#Sample|A Sample Configuration Session]]
 
* [[#Parameters|Configuration Parameters]]
 
* [[#Troubleshooting|Troubleshooting Build Problems]]
 
 
There are some build-related issues that are dependent on the operating system present on the machine. Some system-specific guidance is sprinkled throughout these materials; the remainder is in a section on [#Guidance system-specific guidance] that is found at the end of this chapter.
 
 
----
 
 
== Before You Start ==
 
 
Before you build the software you '''may need to obtain certain other software distributions'''. All the software packages described here are available by public FTP from a variety of Internet hosts; consult the [http://www.lerc.nasa.gov/archieplex/ archie] resource location service to find copies close to your system.
 
 
==== TIFF ====
 
 
HylaFAX requires version 3.4 or later of the freely available TIFF software distribution. The master FTP site for this distribution is ftp://ftp.sgi.com/graphics/tiff. Note that the TIFF distribution must be installed before building HylaFAX from source code or HylaFAX must be specially configured to search for TIFF include files and libraries in non-standard locations.
 
 
==== gcc ====
 
 
You need a contemporary C++ compiler to build this system. ''gcc version 2.6.3 is the current recommended version to use; though later versions are also known to work.'' Versions of gcc prior to 2.6.1 will not work. When installing gcc beware of the make install step. On some systems and/or with some versions of gcc, the fax software may not compile properly if the include files are wrong (function prototypes that would normally cause type casts to be done may be missing).
 
 
==== C++ runtime libraries ====
 
 
HylaFAX requires only minimal C++ runtime support; basic dynamic memory allocation facilities and support for creating global static objects; it does not use any of the newer C++ runtime facilities such as exception handling. Most C++ compiler packages include everything that you need in the way of a runtime library. When using GNU gcc you may also need the libg++ distribution which is packaged separately from gcc. On some systems where gcc is used these facilities can be satisfied without linking against -lg++ or -liberty, but on others one or both of these libraries are needed for certain library routines that are normally found in the C runtime library. The configuration procedure will abort if libg++ is needed but is not present on the build system. If libg++ is required you should use the version that is appropriate for the compiler. ''When using gcc version 2.6.3, libg++2.6.2 is the recommended version to use.''
 
 
==== ghostscript ====
 
 
If you are not on a Silicon Graphics machine (and maybe even if you are), then you will need the Ghostscript PostScript interpreter software to build a PostScript imaging engine to be used by the facsimile server. (This imaging engine is frequently referred to as a Raster Image Processor or RIP.) Ghostscript comes in three flavors, two of which are important to us: GNU PostScript, a version governed by the GNU Public License (GPL), and [http://www.cs.wisc.edu/~ghost/ Aladdin Ghostscript], a version covered by the Aladdin Free Public License. Both versions are copyrighted work and are not shareware or in the public domain. Aladdin Ghostscript is free for use by end users but does not allow commercial distribution; to do this you must arrange for a commercial license. Versions of GNU Ghostscript are distributed approximately a year following the corresponding Aladdin Ghostscript version. For more information on these and other issues consult the information located at http://www.cs.wisc.edu/~ghost/.
 
 
Ghostscript Version 2.6.1 and later are known to work. ''If you use version 2.6.1 however, be certain to apply patches 1-4.'' If you do not apply the patches you will encounter a bug in the clipping code that is triggered by the default cover page distributed with this software. Also beware that if you use a version of Ghostscript prior to 3.12 (inclusive) that there is a tiffg32d driver that writes incorrect 2D-encoded facsimile data; either do not configure this driver for use or disable its use by setting '''Use2D''' in the HylaFAX scheduler configuration file so it does not try to generate 2D-encoded facsimile data for outbound jobs.
 
 
==== gmake ====
 
 
The make files are extensive and work untouched with the system make under many systems. If your make does not understand them, then you should be able to use the GNU make (gmake) instead. If you decide to use gmake, be sure to get version 3.63 or newer; otherwise you may encounter problems (especially with the rules that automatically generate source code dependency information).
 
 
==== gawk ====
 
 
Several of the shell scripts included in this software make use of awk. These uses are reasonably simple, but will not work if your awk is old enough that it does not support functions or the -v command line option for setting variable values before the BEGIN action is executed. If you encounter problems using the standard awk on your system, try the GNU awk: gawk.
 
 
{|
 
|
 
[[Image:warning_icon.gif]]
 
| ''When using gawk be sure to use version 2.15 or later; HylaFAX is unable to detect versions of gawk that do not work correctly.''
 
|}
 
 
==== sed ====
 
 
Many of the shell scripts included in this software make use of sed. Certain systems are known to have versions of sed that do not handle the shell scripts. If you encounter problems, the latest GNU sed should be substituted.
 
 
==== /bin/test ====
 
 
The software configuration shell script (configure) and the modem configuration shell script (faxaddmodem) make heavy use of the test program. On some systems the '''/bin/test''' program does not support options such as -c (test if a file is a character special device). Source for a contemporary, public domain, test program is available by public FTP from [ftp://ftp.uu.net/ ftp.uu.net].
 
 
==== ps2fax binary for IRIX systems ====
 
 
The Display PostScript-based imager for Silicon Graphics systems is included in the binary distribution images provided on ftp.sgi.com. If you choose to work from the source code on an IRIX system you may want a copy of the ps2fax program: it is available separately on ftp.sgi.com in the HylaFAX source distribution area: ftp://ftp.sgi.com/sgi/fax/source. ''Note that this is a COFF executable for IRIX 4.x and 5.x systems and requires that the IRIX '''dps_eoe''' package be installed for proper use.''
 
 
----
 
 
== The Build Procedure ==
 
 
To build the software you need to first run the configure shell script that is located in the top level of the source directory. This script probes the target system for necessary tools and functions and constructs a build environment in which the software may be compiled. Once configuration is done, you simply run make to build the software and then make install to do the installation; for example:
 
 
* hyla% '''cd hylafax-v3.0beta099'''
 
* hyla% '''./configure'''
 
** ''...lots of messages...''
 
* hyla% '''make'''
 
** ''...lots of messages...''
 
* hyla% '''su''' # NB: installation must be done by the super-user
 
* hyla# '''make install'''
 
 
In general, the software is designed such that the following should be ``''make-able'''' in each directory:
 
 
{| width="80%"
 
| '''Target'''
 
| '''Purpose'''
 
|-
 
| all
 
| build everything that is to be installed (default)
 
|-
 
| depend
 
| build dependency information
 
|-
 
| install
 
| build and install everything normally installed
 
|-
 
| clean
 
| remove .o files and cruft, but not executables
 
|-
 
| clobber
 
| remove everything that can be recreated
 
|-
 
| distclean
 
| remove ''absolutely everything'' that can be recreated
 
|}
 
 
Note that after running "make clobber" or "make distclean" the configure script must be run again to create the Makefiles and other build-related files.
 
 
----
 
 
=== Build Trees ===
 
 
There are two schemes for configuring and building the software. If you intend to build the software for only one target system, you can configure the software so that it is built in the same directories as the source code.
 
 
hyla% '''cd hylafax-v4.0beta011'''
 
hyla% '''ls'''
 
COPYRIGHT      config        dist          faxrm          sendfax
 
Makefile.in    config.guess  distrules      faxstat        sendpage
 
README        config.h.in    etc            hfaxd          sgi2fax
 
README.ultrix  config.site    faxalter      html          util
 
TODO          config.sub    faxcover      man
 
VERSION        configure      faxd          port
 
afm            defs.in        faxmail        rules.in
 
hyla% '''./configure'''
 
 
Otherwise, you can configure a build tree that is parallel to the source tree hierarchy but which contains only configured files and files created during the build procedure.
 
 
hyla% '''cd hylafax-v4.0beta011'''
 
hyla% '''mkdir obj obj/mycpu'''
 
hyla% '''cd obj/mycpu'''
 
hyla% '''../../configure'''
 
 
This second scheme is useful for:
 
 
* building multiple targets from a single source tree
 
* building from a read-only source tree (e.g. if you receive the distribution on CD-ROM)
 
 
Beware that if you choose to use the second scheme for configuring the software you must not use an absolute pathname when you run configure (i.e. a pathname that begins with ``/'') and the make that you use to build the software must correctly support the VPATH facility.
 
 
{|
 
| valign="top" |
 
[[Image:warning_icon.gif]]
 
| '''HP-UX 9.05''': ''The standard make incorrectly processes VPATH; either use gmake or configure builds in the source tree.''
 
|}
 
 
{|
 
| valign="top" |
 
[[Image:warning_icon.gif]]
 
| '''Solaris 2.3''': ''The standard make does VPATH processing incorrectly for files passed to the make dependency generator script (the last file in the list is not converted to a pathname relative to the source directory); this causes lots of messages that can be ignored.''
 
|}
 
 
----
 
 
=== Configuration Files ===
 
 
The configuration process is critical to the proper compilation, installation, and operation of the software. The configure script runs a series of tests to decide whether or not the target system supports required functionality and, if it does not, whether it can emulate or workaround the missing functions. This procedure is fairly complicated and, due to the nonstandard nature of most UNIX systems, prone to error. The first time that you configure the software for use you should check the output from the configure script and look for anything that does not make sense for your system. A sample configure run is shown below together with an explanation of the work that is done.
 
 
A second function of the configure script is to set configuration parameters for the software. Many of these values are just default settings that can be changed after configuration through files that programs read at runtime, but some settings cannot be changed without rerunning the configure script. For example, by default the software is configured for installation in the '''/usr/local''' hierarchy; this cannot be changed without rerunning the configure script.
 
 
The configure script reads two ''configuration files'' to get configuration parameters: a ''site-wide configuration file'' that has settings that are to be applied to all systems at a particular site, and a ''target-specific configuration file'' that has settings for a specific system. Site-wide configuration files are named '''config.site''' and are automatically searched for first in any directory specified on the command line to configure with the -site option, or if that fails, in the directory in in which the configure script is located. Target-specific configuration files are named '''config.local''' and are looked for first in the top-level build directory, or, if that fails, in the directory in which the configure script is located.
 
 
{|
 
|
 
[[Image:info_icon.gif]]
 
| ''configure reads any '''config.site''' file first, and then any '''config.local''' file. This permits target-specific definitions to override site-wide definitions.''
 
|}
 
 
Configuration files are actually just shell scripts (written in the Bourne shell syntax) that define well-known shell variables that are used in the configuration process. For example, the following file might be used on a BSD/OS system to configure the software for installation in the '''/usr/contrib''' area and to make use of the Adobe Font Metric files that are already distributed as part of the BSD/OS 1.1 distribution:
 
 
 
#
 
# Parameters suitable for BSD/OS 1.1
 
#
 
DIR_AFM="/usr/contrib/lib/flexfax/afm" # reuse existing files
 
DIR_BIN="/usr/contrib/bin" # directory for client apps
 
DIR_SBIN="/usr/contrib/bin" # directory for system apps
 
DIR_LIBEXEC="/usr/contrib/bin" # directory for libraries&hidden apps
 
DIR_LIBDATA="/usr/contrib/lib/hylafax" # directory for client data
 
DIR_MAN="/usr/contrib/man" # directory for manual pages
 
DIR_SPOOL="/var/spool/hylafax" # directory for spooling area
 
DIR_HTML="/usr/contrib/html/hylafax" # directory for HTML documentation
 
DIR_CGI="/usr/contrib/html/cgi-bin" # directory for CGI scripts
 
 
 
The complete list of configuration parameters is given in the sample '''config.site''' file provided in the source distribution. Also, the sections below on ``[#Packages Configuring Packages]'' and ``[#Parameters Configuration Parameters]'' have information on the most important or obscure parameters.
 
 
Finally, take note that there are two other configuration-related files that may be useful. The file named '''config.cache''' has all the configuration parameter settings that were selected the last time configure was run. This file is automatically read in by configure when it starts up to speed the configuration process. '''config.cache''' may be safely removed at any time. Cached settings are also automatically ignored if new settings are set through command line arguments to '''configure''' or through a '''config.local''' or '''config.site''' file.
 
 
The other file of interest is '''config.log'''. This file contains information and messages related to the various tests that configure does when constructing a build environment. If the configuration process fails for some reason or configure does something unexpected this file should be used to debug the problem.
 
 
{|
 
|
 
[[Image:warning_icon.gif]]
 
| ''Beware that the configure script is designed to be similar to scripts generated by the GNU autoconf facility but it is not 100% compatible. Use the -help option to configure for a list of the available options.''
 
|}
 
 
----
 
 
=== Configuring Packages ===
 
 
HylaFAX uses the notion of a ''package'' to control which pieces of software are included in a build. Some packages are optional and are installed only as needed, or only if specifically requested at the time the configure script is run. Other packages may select one of several incompatible choices that must be made when the software is built. Packages can be specified in a '''config.site''' or '''config.local''' file, or by using a -with-''package'' option when invoking configure; e.g. configure -with-AFM to request the AFM package. Most packages are automatically configured according to the characteristics of the system where HylaFAX is being built; this may not be appropriate when preparing binary distributions for multiple systems in which case they can be explicitly enabled or disabled.
 
 
{| border="BORDER" cellpadding="3"
 
! align="left" | Name
 
! align="left" | Default
 
! align="left" | Description
 
|-
 
| valign="top" | ''Adobe Font Metrics''
 
| valign="top" | AFM=auto
 
|
 
This package contains Adobe Font Metric files that came from the public dvips distribution. AFM files are required by the [man/textfmt.html textfmt(1)] and [man/faxmail.html faxmail(1)] programs for converting ASCII text to PostScript. The AFM files should reflect the characteristics of the fonts that are used for imaging PostScript on the fax server. However if the PostScript RIP used to image text does not come with AFM files for its fonts, then this package can be substituted with only minimal degradation in the formatting of the imaged text. By default this package is configured for installation only if font metric files do not appear to be present on the build machine.
 
|-
 
| valign="top" | ''Display PostScript RIP''
 
| valign="top" | DPS=no
 
| Whether or not to build and install a DPS-based PostScript imager for IRIX 4.x and 5.x systems from sources present in the HylaFAX build tree. This option is intended for people building binary distributions.
 
|-
 
| valign="top" | ''Dynamic Shared Object Support''
 
| valign="top" | DSO=auto
 
| This package controls whether or not to configure the building of ''Dynamic Shared Objects'' (DSOs) for utility routines used by both client and server applications, and for a nucleus of common code used by server applications. Use of DSOs can significantly reduce the disk space needed for the HylaFAX software. If DSOs are not used then the code is statically linked into each application that requires it. By default this package is configured only if the build system appears to suport DSOs in a way that fits into the normal build scheme. If DSO support is ''explicitly enabled'' and there is no support for using DSOs in the expected way then DSOs are not used. Beware that DSOs can only be used when the compiler and runtime system support the runtime instantiation of global C++ objects that have constructors; something that few systems support.
 
|-
 
| valign="top" | ''Getty Support''
 
| valign="top" | GETTY=auto
 
| This package controls whether or not to configure BSD- or System V-style getty support for handling incoming data connections. By default this package is configured according to the requirements of the target system.
 
|-
 
| valign="top" | ''Ghostscript RIP''
 
| valign="top" | GS=no
 
| Whether or not to build and install a PostScript imager from Ghostscript sources present in the HylaFAX build tree. This option is intended for people building binary distributions.
 
|-
 
| valign="top" | ''Impressario RIP''
 
| valign="top" | IMP=no
 
| Whether or not to build and install an Impressario 2.1 plug-in DSO from sources present in the HylaFAX build tree. This option is intended for people building binary distributions.
 
|-
 
| valign="top" | ''HTML Documentation''
 
| valign="top" | HTML=no
 
|
 
This package contains this HTML documentation about HylaFAX. By default this package is not configured for installation. HTML documentation can be viewed directly from the source directory; otherwise all the documentation can be viewed from the main WWW site at http://www.hylafax.org/. This option is intended for people building binary distributions.
 
|-
 
| valign="top" | ''PostScript RIP''
 
| valign="top" | PS=auto
 
| This package selects which RIP to use for imaging PostScript on the server. Possible values are: gs for Ghostscript, dps for the Display PostScript-based RIP provided for IRIX 4.x and 5.x systems, or imp for a plug-in DSO for Impressario 2.1 under IRIX. By default the DPS support is selected for IRIX systems; otherwise Ghostscript is used.
 
|-
 
| valign="top" | ''Regular Expression Support''
 
| valign="top" | REGEX=yes
 
| This package controls whether or not to use the regular expression package included with the software. On systems where there is POSIX regular expression support in the standard system library use of this package may be disabled. Note that if this package is disabled the location of the include files and library containing the regular expression support must be specified; see the REGEXINC and LIBREGEX configuration parameters.
 
|-
 
| valign="top" | ''SGI RGB Image Converter Support''
 
| valign="top" | SGI2FAX=auto
 
| This package controls whether or not to configure the sgi2fax program that converts SGI RGB images to TIFF/F (for direct transmission as facsimile). By default this package is configured for installation only if the build system appears to have support for the SGI Image library that sgi2fax uses to read RGB images. If this package is not installed then SGI RGB images must be converted to a form suitable for transmission using some other mechanism.
 
|-
 
| valign="top" | ''System V Init Support''
 
| valign="top" | SYSVINIT=auto
 
| This package controls whether or not to configure the System V-style support for automatically starting the HylaFAX queuer process from init(1). By default this support is configured for installation only if the target system appears to use a System V-style init (auto); i.e. the '''/etc/rc0.d''' and '''/etc/rc2.d''' directories exist.
 
|-
 
| valign="top" | ''UTMP/WTMP Support''
 
| valign="top" | UTMP=auto
 
| This package controls whether or not system accounting work should be done using the normal '''utmp''' files and data structures or the extended '''utmpx''' facilities. By default the appropriate support is chosen based on whether or not the build system has the '''<utmpx.h>''' file (auto). Explicit support can also be chosen by setting this parameter to utmp (normal accounting) or utmpx (extended accounting).
 
|-
 
| valign="top" | ''zlib Support''
 
| valign="top" | ZLIB=yes
 
| This package controls whether or not to use the zlib compression package included with the software. On systems where the zlib distribution has already been installed this package may be disabled. Note however that if this package is disabled the location of the include files and library for the zlib distribution must be specified; see the ZLIBINC and LIBZ configuration parameters.
 
|}
 
 
----
 
 
=== Configuring the HTML Documentation ===
 
 
HylaFAX comes with extensive documentation written in HTML, the language used to author many documents found on the World Wide Web (WWW). These materials can be viewed at the main WWW site http://www.hylafax.org/, they can be installed on a local WWW server, or they can be viewed directly from the source area. Viewing the documentation through a WWW server is preferred because the materials include links to reference manual pages that are accessed through CGI scripts, and these links will not be available when the documentation is accessed directly from the source distribution.
 
 
To configure the build environment so that it will install the HTML documentation, you need to request the ``HTML package'' when running the configure script. This is done by specifying -with-HTML as a command-line option to '''configure''' or by setting HTML=yes in a '''config.site''' or '''config.local''' file. When the HTML package is setup for installation there are four other parameters that should be defined according to local conventions:
 
 
{| border="BORDER" cellpadding="3"
 
| align="left" | '''Parameter'''
 
| align="left" | '''Default'''
 
| align="left" | '''Description'''
 
|-
 
| valign="top" | DIR_HTML
 
| valign="top" | '''/var/httpd/hylafax'''
 
| The directory where HTML materials should be installed.
 
|-
 
| valign="top" | DIR_CGI
 
| valign="top" | '''/var/httpd/cgi-bin'''
 
| The directory where CGI scripts should be installed.
 
|-
 
| valign="top" | CGIPATH
 
| valign="top" | '''/cgi-bin'''
 
| The pathname to use in HTML documents to reference scripts installed in DIR_CGI.
 
|-
 
| valign="top" | HTMLPATH
 
| valign="top" | '''/hylafax'''
 
| The pathname to use in HTML documents to reference materials installed in DIR_HTML.
 
|}
 
 
(NB: the default values are suitable for the NCSA HTTP server).
 
 
Finally, to complete the installation the HTML documents must be edited to ''fix pathnames'' that are found in the HTML files. All instances of @HTMLPATH@ and @CGIPATH@ must be replaced with the values of DIR_HTML and DIR_CGI, respectively. (This was done automatically in previous versions of HylaFAX but must now be done manually.) A shell script to do this is:
 
 
 
#! /bin/sh
 
ROOT=${1-/hylafax}
 
CGI=${2-/cgi-bin}
 
PATTERN="@[a-zA-Z][a-zA-Z]*@"
 
patch()
 
{
 
  chmod +w $1
 
  ed - $1&lt;&lt;EOF
 
g;@'''HTMLPATH'''@;s;;$ROOT;g
 
g;@'''CGIPATH@''';s;;$CGI;g
 
w
 
q
 
EOF
 
    chmod -w $1
 
}
 
FILES=`grep -l "$PATTERN" *.html */*.html`
 
test "$FILES" && {
 
  for i in $FILES
 
  do
 
      echo $i; patch $i;
 
  done
 
}
 
 
 
There are a few other issues to consider when installing the CGI scripts:
 
 
* The manpage script that provides access to the UNIX manual pages may require some tailoring if manual pages are installed in non-standard locations or if the normal system man command does not support the expected options. If you have problems consult the script.
 
* If local support is to be provided, it may be worthwhile to alter the electronic mail addresses embedded in several of the CGI scripts.
 
 
----
 
 
=== Upgrading From FlexFAX ===
 
 
If you were previously using FlexFAX beware that several things have changed in incompatible ways. The following is a list of things you should be aware of when configuring the latest distribution:
 
 
* The default server operation parameters set in '''config.h''' have changed; for example the default kill time for a fax job is now 3 hours instead of 24 hours. Verify the parameters in '''config.h''' are what you want.
 
* Numerous pathnames may have changed. The source-based installation procedure does not remove previously installed files unless they are to be overwritten; this can result in multiple versions of applications such as faxaddmodem being installed. Verify the parameters used for installation; you may want to tailor them to your environment by creating a '''config.local''' file with local configuration parameters.
 
* HylaFAX includes an improved '''install.sh''' script that is used to install files on non-IRIX systems. Certain files in the distribution are treated as ''configuration-specific files'' and are not overwritten if they appear to have local modifications. Instead the '''install.sh''' script will install the new file with a '''.N''' suffix and print a warning message. Be sure to reconcile these conflicts by comparing the old and new file contents with a program like diff(1); in most cases you should incorporate any local modifications into the new file and install it for use.
 
 
There are other issues with upgrading from FlexFAX; they are discussed in the chapter that describes [setup.html setting up the server].
 
 
----
 
 
=== A Sample Configuration Session ===
 
 
This section shows a sample configuration session and describes the work done. The session on the left in a fixed width font with user-supplied input in a '''bold font'''. Commenttary is shown on the right in a normal or ''italic'' font or across both columns. Blank space is present in the session output where it is needed to fit comments on the page; in normal operation the output from configure does not include this white space.
 
 
This session was collected on a 486 machine running BSD/OS 1.1.
 
 
----
 
 
{|
 
| valign="top" |
 
wullbrandt% '''mkdir fax'''
 
wullbrandt% '''cd fax'''
 
wullbrandt% '''ln -s /hosts/oxford/usr/people/sam/fax src'''
 
| valign="top" |  A build tree separate from the source tree is used here. In fact, in this case the distribution is accessed from a read-only NFS-mounted filesystem.
 
----
 
 
|-
 
| valign="top" |
 
wullbrandt% '''src/configure'''
 
 
Configuring HylaFAX (tm) (aka FlexFAX) v3.0beta095.
 
 
If configure does the wrong thing, check the file config.log for
 
information that may help you understand what went wrong.
 
 
Reading site-wide parameters from src/config.site.
 
Fee, fie, foe, this smells like a i386-unknown-bsdi1.1 system.
 
| valign="top" |  Note that the version and the deduced target configuration (i386-unknown-bsdi1.1) are printed. The file '''config.log''' should be checked if something goes wrong during configuration; it has output from the tests that configure does.
 
----
 
 
|-
 
| valign="top" |
 
Using /usr/local/bin/gcc for a C compiler (set CC to override).
 
Looks like /usr/local/bin/gcc supports the -g option.
 
Looks like an ANSI C preprocessor.
 
... but __ANSI_CPP__ is not automatically defined, will compensate.
 
Looks like /usr/local/bin/gcc supports the -M option for make dependencies.
 
| valign="top" |  configure checks the normal shell search path for ANSI C compilers. A compiler is selected if it properly compiles a small test program. A specific compiler may be selected by setting the CC environment variable to the appropriate pathname, by supplying the parameter on the command line, e.g. -with-CC=gcc, or by setting CC in a configuration file.
 
|-
 
| colspan="2" |
 
----
 
[[Image:warning_icon.gif]] ''Note that an ANSI C compiler is required to build the software. If a C compiler requires options to enable ANSI C compilation, these options can be specified with the ENVOPTS parameter.''
 
 
----
 
 
|-
 
| valign="top" |
 
Using /usr/local/bin/gcc for a C++ compiler (set CXX to override).
 
Looks like /usr/local/bin/gcc supports the -g option.
 
Using " -g" for C++ compiler options.
 
Looks like an ANSI C++ preprocessor.
 
... but __ANSI_CPP__ is not automatically defined, will compensate.
 
| valign="top" |  A C++ compiler is selected using a scheme similar to the one used to find a C compiler. Likewise there is a CXX parameter that can be set to explicitly select a C++ compiler.
 
----
 
 
|-
 
| valign="top" |
 
Using /usr/bin/make to configure the software.
 
Using ".include &lt;file&gt;" syntax for Makefiles.
 
| valign="top" |  The make selected must support include files. configure can deduce several different syntaxes for specifying include files. Note that a large number of configuration parameters can be changed by editing the top-level '''defs''' file that is included by each Makefile in the distribution. A MAKE parameter can be used to control which make to use.
 
----
 
 
|-
 
| valign="top" |
 
Using /bin/bash to process command scripts.
 
| valign="top" |  All the HylaFAX shell scripts are written using Bourne shell syntax. The standard shell on many systems is incapable of processing these scripts so configure prefers '''bash''' to '''ksh''' to '''sh'''.
 
----
 
 
|-
 
| valign="top" |
 
Looks like -lutil is needed for wtmp file logging.
 
Looks like -lm is the library for math functions.
 
| valign="top" |  Various system-specific libraries that may or may not be needed are checked for. If your system requires a library that is not automatically included it can be specified by setting the MACHDEPLIBS parameter.
 
|-
 
| colspan="2" |
 
----
 
''Creating port.h.'' The '''port.h''' file is included by all the C and C++ code in the system. It includes definitions for functions and types that are missing from system include files, #defines to enable or disable system-specific functionality, and other odds and ends.
 
----
 
 
|-
 
| valign="top" |
 
Creating port.h with necessary definitions.
 
... open FIFO files read-only
 
... use (sig_t) for signal handler type
 
... use (sig_t) for sigvec handler type
 
... use (sig_t) for sigaction handler type
 
... configure use of mmap for memory-mapped files
 
... configure use of fchown
 
... add function prototype for cuserid
 
... configure use of fchmod
 
... add function prototype for setutent
 
... add function prototype for endutent
 
... add function prototype for pututline
 
... configure use of &ltlocale.h&gt; (internationalization support)
 
... configure use of &ltpaths.h&gt;
 
... configure use of &ltsys/select.h&gt;
 
... configure use of logwtmp (BSD-style wtmp logging)
 
... add function prototype for logwtmp
 
... configure use of logout (BSD-style utmp support)
 
... add function prototype for logout
 
Done creating port.h.
 
| valign="top" |  This file can take a long time to generate so configure creates the file only when it is needed, either because the file does not exist or because a different target or compiler is to be used. Note that running "make distclean" in the top-level directory of the build tree will remove the '''port.h''' file (along with all the other files generated by configure).
 
|-
 
| colspan="2" |
 
----
 
''Selecting emulated library functions.'' Certain functions used by HylaFAX are not present on all systems but can be emulated using other system functionality. configure checks for the presence of required functions and if they are missing, will configure emulation code from the '''port''' directory to use instead. Building HylaFAX on unsupported systems may require adding to the code to the '''port''' directory.
 
----
 
 
|-
 
| valign="top" |
 
Checking system libraries for functionality to emulate.
 
... emulate cuserid
 
Done checking system libraries.
 
| valign="top" |  If a routine must be emulated and configure does not automatically check for it, the routine name can be specified using the PORTFUNCS parameter. To add emulation support for a new function foo, create a file '''port/foo.c''' that contains the emulation code and then set PORTFUNCS=foo in a configuration file or modify the configure script to automatically check for the missing function.
 
----
 
 
|-
 
| valign="top" |
 
Checking for TIFF support.
 
Using TIFF include files from /usr/local/include
 
Using pre-built TIFF library -L/usr/local/lib -ltiff
 
Done checking for TIFF support.
 
| valign="top" |  HylaFAX uses the TIFF library extensively. By default the TIFF library and tools are assumed to be instaled in the default location used by the TIFF distribution.
 
|-
 
| colspan="2" |
 
----
 
[[Image:warning_icon.gif]] ''If the TIFF library is installed as a DSO then the test done by configure will fail unless the DSO is in a well-know location or is explicitly searched for; e.g. with the LD_LIBRARY_PATH environment variable.''
 
 
----
 
 
|-
 
| valign="top" |
 
Checking for Dynamic Shared Object (DSO) support.
 
Done checking for DSO support.
 
| valign="top" |  If the DSO package is enabled (DSO=auto or DSO=IRIX), then configure will verify the system and compiler are capable of constructing DSO's in the expected way. Note that while a system may support DSO's the compiler may not be capable of generating the required position-independent code and/or the compiler may not pass the needed options through to the loader.
 
|-
 
| colspan="2" | ----
 
|-
 
| colspan="2" |  ''Selecting utility programs.'' configure locates various system utility programs that are used by the software. Note that absolute pathnames are selected because several scripts and programs excute with super-user privileges.
 
|-
 
| colspan="2" | ----
 
|-
 
| valign="top" |
 
Selecting programs used during installation and operation.
 
Looks like /usr/bin/awk should be used to process command scripts.
 
Looks like /usr/sbin/sendmail should be used to deliver mail.
 
Looks like /usr/bin/mkfifo creates FIFO special files.
 
Looks like /bin/mv supports the -f option to force a move.
 
Looks like /bin/ln supports the -s option to create a symbolic link.
 
Done selecting programs.
 
| valign="top" |  Several things to note: The awk program selected for use must support functions using the POSIX-style syntax (i.e. using function and not the older func keyword). configure will not select an awk program that does not support the syntax used by the awk scripts included in the distribution. Mail delivery is done using sendmail; a different mailer cannot be substituted without changing certain scripts because a number of sendmail-specific command line options are used.
 
|-
 
| colspan="2" |
 
----
 
''Selecting default configuration parameters.'' The remainder of the work done by configure involves setting up configuration parameters that are mainly used during the ''operation'' of the fax software. These parameters can be set during configuration or, in most cases, they can be set through runtime configuration files.
 
----
 
 
|-
 
| valign="top" |
 
Using uid uucp and gid dialer for controlling access to fax stuff.
 
Using uid bin and gid bin for installing programs.
 
Using LSB2MSB bit order for your i386 cpu.
 
Looks like you need BSD getty support.
 
Looks like /usr/libexec/getty is the program to exec for a data call.
 
|-
 
| valign="top" |
 
Looks like /bin/vgetty as the program to exec for a voice call.
 
Looks like /bin/egetty as the program to exec for an extern call.
 
Looks like you use binary-style UUCP lock files.
 
Looks like UUCP lock files go in /var/spool/uucp.
 
Looks like font metric information goes in /usr/contrib/lib/flexfax/afm.
 
Looks like the gs imager package should be used.
 
Looks like /usr/contrib/bin/gs is the PostScript RIP to use.
 
Looks like manual pages go in /usr/local/man.
 
Looks like manual pages should be installed with bsd-nroff-gzip-0.gz.
 
| valign="top" |  ''The '''egetty''' and '''vgetty''' programs are not part of HylaFAX; they are ``hooks'' for developers to integrate programs that implement voice-oriented capabilities.''
 
|-
 
| valign="top" |
 
HylaFAX configuration parameters are:
 
 
[ 1] Directory for applications:        /usr/local/bin
 
[ 2] Directory for lib data files:      /usr/local/lib/fax
 
[ 3] Directory for lib executables:    /usr/local/lib/fax
 
[ 4] Directory for system apps:        /usr/local/bin
 
[ 5] Directory for manual pages:        /usr/local/man
 
[ 6] Directory for HTML documentation:  /usr/local/doc/fax
 
[ 7] Directory for spooling:            /var/spool/hylafax
 
[ 8] Directory for font metrics:        /usr/contrib/lib/flexfax/afm
 
[ 9] Directory for uucp lock files:    /var/spool/uucp
 
[10] Uucp lock file scheme:            binary
 
[11] PostScript imager package:        gs
 
[12] PostScript imager program:        /usr/contrib/bin/gs
 
[13] Manual page installation scheme:  bsd-nroff-gzip-0.gz
 
[14] Default page size:                North American Letter
 
[15] Default vertical res (lpi):        98
 
[16] Location of getty program:        /usr/libexec/getty
 
[17] Location of voice getty program:  /bin/vgetty
 
[18] Location of sendmail program:      /usr/sbin/sendmail
 
[19] Location of TIFF tools:            /usr/local/bin
 
 
Are these ok [yes]?
 
| valign="top" |  At this point you can interactively modify any of the displayed parameters. Hitting a carriage return or typing yes will accept the current parameters. Typing one of the numbers displayed along the left hand side causes configure to prompt for a new value of the specified parameter. Typing anything else causes configure to prompt for a new value ''for each parameter''. In general hitting carriage return will accept the current value and typing anything that is unacceptable will cause a help message to be displayed. See below for descriptions of the parameters.
 
----
 
 
|-
 
| valign="top" |
 
Creating defs from src/defs.in
 
Creating rules from src/rules.in
 
Creating Makefile from src/Makefile.in
 
    ''...stuff deleted...''
 
Setting up make dependency files.
 
Done.
 
| valign="top" |  Once parameters are setup configure generates all the files that depend on these parameters. Note that certain files may or may not be created based on the selection of optional packages and/or the functions supported by target system.
 
|}
 
 
----
 
 
=== Configuration Parameters ===
 
 
This section gives a brief description of the less obvious configuration parameters. Consult the distributed '''config.site''' for a ''complete'' list of parameters. The list here is sorted alphabetically.
 
 
{|
 
| valign="top" |
 
[[Image:warning_icon.gif]]
 
| ''The default setting for most configurations parameters is usually correct. Be especially careful about enabling or overriding parameters that control workarounds for system bugs; certain problems can cause server processes to go into infinite loops!''
 
|}
 
 
Note that HylaFAX is composed of ''client'' and ''server'' applications. Client applications are programs that normal users invoke to send facsimile, query the status of facsimile servers, etc. Server applications are programs that reside ''only on the machine where the fax modems are present''.
 
 
{| border="BORDER" cellpadding="3"
 
! align="left" | Parameter
 
! align="left" | Description
 
|-
 
| valign="top" | AROPTS
 
| The options passed to ar when creating an archive. Note that configure will automatically check to see if ar supports an s to create a symbol table instead of using ranlib.
 
|-
 
| valign="top" | CONFIG_ABORTBUG
 
| On some systems the logic used by the server processes to poll for messages on a FIFO special file while actively doing work can cause the process to go into an infinite loop. Setting this parameter to yes causes the server processes to '''not''' poll for messages. Enabling this workaround means that the faxgetty process will not recognize messages to abort a facsimile while it is being received.
 
|-
 
| valign="top" | CONFIG_BADEXECVEPROTO
 
| On some systems the prototype function declaration for the execve system call is wrong (it does not list certain parameters as const). Setting this parameter to yes causes the software to work around this problem.
 
|-
 
| valign="top" | CONFIG_BADEXECVPROTO
 
| On some systems the prototype function declaration for the execv system call is wrong (it does not list certain parameters as const). Setting this parameter to yes causes the software to work around this problem.
 
|-
 
| valign="top" | CONFIG_BADGETOPTPROTO
 
| On some systems the prototype function declaration for getopt is wrong (it does not list certain parameters as const. Setting this parameter to yes causes the software to work around this problem.
 
|-
 
| valign="top" | CONFIG_BADSELECTPROTO
 
| On some systems the prototype function declaration for select passes sets of file descriptors as int* instead of fd_set*. Setting this parameter to yes causes the software to assume the int* form is required.
 
|-
 
| valign="top" | CONFIG_FIFOBUG
 
|  Whether or not to enable a workaround for a kernel bug that causes select system calls to return prematurely after a process closes the ``client side'' of a FIFO special file. Setting this parameter to yes causes server processes to close and reopen FIFO special files after each received message. Note that aside from the additional overhead incurred in the server processes, this problem can also cause client programs to be temporarily unable to reach a server process. To minimize this possibility, the client code tries to reach a server process up to 5 times before giving up; this can introduce noticeable delays in applications such as faxstat.
 
|-
 
| valign="top" | CONFIG_NOREOPEN
 
| Whether or not to reopen the tty device that a modem is connected to after raising and lowering the DTR signal (to reset the modem). This is done because on some systems lowering DTR causes the device to be placed in an unusable state. It may be desirable to disable this action however; for example when a modem is connected to an Ethernet-based terminal server. Setting this parameter to yes causes the modem to be reopened after reset. By default this parameter is set according to the target system.
 
|-
 
| valign="top" | CONFIG_NOSTDINDUP
 
| On some systems, if the standard output is redirected to be the same as the standard input, then the stty program will emit a warning message. This is necessary for some older systems because it is the only way to force stty to change parameters on a tty device that is not the controlling tty. Setting this parameter to yes causes the ondelay program to not set stdout to stdin. Enabling this workaround can break the faxaddmodem program; it should be used only on systems where stty supports the -f option to select a tty device other than the controlling tty.
 
|-
 
| valign="top" | CONFIG_OPENFIFO
 
| The mode to use when opening a FIFO special file in a server process. Normally this should be O_RDONLY, but on some systems this must be O_RDWR to avoid kernel bugs that cause select system calls to return prematurely after a process closes the ``client side'' of a FIFO. By default this parameter is set according to the target system.
 
|-
 
| valign="top" | CONFIG_SELECTBUG
 
| On some systems where the FIFO select bug (see above) exists the select system call may return bits set in the read, write, and exception masks even if they were not requested; this in turn can cause the Dispatcher code to abort. Setting this parameter to yes causes the Dispatcher to ignore any bits set in bit vectors returned by select if the bits were not requested. Enabling this workaround adds additional overhead to each server process.
 
|-
 
| valign="top" | CONFIG_SOCKARGLENTYPE
 
| On some systems the type of call-by-reference parameters that specify the size of variable-length buffers in socket-related calls is wrong (the type is something other than int*). This parameter can be set to the C type that should be used for length parameters; e.g. ``unsigned long''; otherwise int is assumed. Setting this parameter incorrectly should result in compilation errors.
 
|-
 
| valign="top" | CONFIG_TIOCMBISBYREF
 
| Whether to pass the argument to the TIOCMBIS ioctl by value or by reference. On most systems the value is passed by reference; consult termio(7) for your system if you are unsure how your system works. Setting this parameter to yes is the default and generates code for passing the argument by reference.
 
|-
 
| valign="top" | CONFIG_WINSZHACK
 
| On some systems the TIOCWINSZ ioctl is defined, but its use requires the inclusion of two non-standard files. Setting this paramter to yes causes the inclusion of these files.
 
|-
 
| valign="top" | CXXFILE
 
| The options to the C++ compiler required to get the compiler to process a file with a '''.c++''' suffix as C++ source code. configure automatically sets this parameter to "-x c++" for gcc and to "-+" for the IBM xlC compiler under AIX.
 
|-
 
| valign="top" | DEFVRES
 
| The default vertical resolution in lines/inch that clients should use for submitted facsimile. Choices are 98 and 196.
 
|-
 
| valign="top" | DIR_AFM
 
| The directory where client applications should find Adobe Font Metric (AFM) files. These files are used by various HylaFAX programs when converting text to PostScript.
 
|-
 
| valign="top" | DIR_BIN
 
| The directory where client applications should be installed; by default this is '''/usr/local/bin'''.
 
|-
 
| valign="top" | DIR_CGI
 
| The directory where CGI scripts used by the HTML-based HylaFAX documentation should be installed; by default this is '''/var/httpd/cgi-bin''' (usually appropriate for the NCSA HTTP server).
 
|-
 
| valign="top" | DIR_HTML
 
| The directory where HTML-based HylaFAX documentation should be installed; by default this is '''/var/httpd/htdocs/hylafax''' (usually appropriate for the NCSA HTTP server).
 
|-
 
| valign="top" | DIR_LIBDATA
 
| The directory to install data files that are required by client applications; by default this is '''/usr/local/lib/fax'''.
 
|-
 
| valign="top" | DIR_LIBEXEC
 
| The directory to install executable programs that are invoked by other applications and not from the command line (e.g. the textfmt program invoked by sendfax to convert text to PostScript when submitting a fax job); by default this is the same as DIR_SBIN.
 
|-
 
| valign="top" | DIR_LOCKS
 
| The directory in which to create UUCP lock files.
 
|-
 
| valign="top" | DIR_MAN
 
| The top-most directory of the manual area where client/server manual pages should be installed.
 
|-
 
| valign="top" | DIR_SBIN
 
| The directory where system applications such as servers should be installed; by default this is '''/usr/local/sbin'''.
 
|-
 
| valign="top" | DIR_SPOOL
 
| The directory in which the HylaFAX server spooling area should be setup; by default this is '''/var/spool/hylafax'''.
 
|-
 
| valign="top" | DSODELAY
 
| When DSO's are built, the option to specify to CC and/or CXX to note that a library should be loaded only as needed. This option is used to delay the loading of the TIFF library for applications that may use it infrequently.
 
|-
 
| valign="top" | DSOOPTS
 
| When DSO's are built, the options to specify to CC and/or CXX to create a DSO.
 
|-
 
| valign="top" | DSOSUF
 
| When DSO's are built, the filename suffix for a DSO. If this is set to "a" then statically linked archives are used.
 
|-
 
| valign="top" | ENVOPTS
 
| Options to pass to CC and CXX to force ANSI C compilation.
 
|-
 
| valign="top" | FAXGID
 
| The group ID to use for the fax user; by default this is selected according to the target system.
 
|-
 
| valign="top" | FAXUID
 
| The user ID to use for the fax user; by default uucp.
 
|-
 
| valign="top" | FILLORDER
 
| The order of bits in a byte on the server machine; either LSB2MSB or MSB2LSB. This is normally selected according to the target system.
 
|-
 
| valign="top" | GCOPTS
 
| Special options to pass the C compiler. If this parameter is set, then configure may append other options to this list.
 
|-
 
| valign="top" | GCXXOPTS
 
| Special options to pass the C++ compiler. If this parameter is set, then configure may append other options to this list.
 
|-
 
| valign="top" | INSTALL
 
| The pathname of the install program to use. Note that this program must emulate the command line interface used by the IRIX install program.
 
|-
 
| valign="top" | LIBMALLOC
 
| Whether or not to use -lmalloc in building the software. By default (auto) configure will probe the system to see if the library is present; if it is then the software will be configured to use it when building. Other possible values are: yes and no to enable and disable use, respectively. On systems that support DSOs it may be important to disable the use of -lmalloc to avoid conflicts with the normal memory alocation routines present in the standard C library.
 
|-
 
| valign="top" | LIBPORT
 
| The pathname of the library that holds code to emulate missing system functionality. Normally this parameter is set by configure based on whether or not emulation code is required for the target.
 
|-
 
| valign="top" | LIBSUN
 
| Whether or not to use -lsun in building the software. By default (auto) configure will probe the system to see if the library is present; if it is then the software will be configured to use it when building. Other possible values are: yes and no to enable and disable use, respectively.
 
|-
 
| valign="top" | LIBREGEX
 
| The command line parameter(s) to use to link the library containing regular expression support. This parameter is set by default to reference the software included in the distribution.
 
|-
 
| valign="top" | LIBTIFF
 
| The command line parameter(s) to use to link against the TIFF library. This parameter is set by default to the default installation location used by the TIFF software distribution.
 
|-
 
| valign="top" | LIBZ
 
| The command line parameter(s) to use to link against the zlib library. This parameter is set by default to reference the software included in the distribution.
 
|-
 
| valign="top" | LLDOPTS
 
| Extra command line options passed to CC and CXX when linking an executable. This option is usually set only when DSO support is enabled (to force the executable to search for the HylaFAX-specific DSO's in non-standard locations in the filesystem.)
 
|-
 
| valign="top" | LOCKS
 
|
 
A specification of the default type of UUCP lock files to use. This parameter is usually one of ascii, binary, -ascii or +ascii; consult the [man/hylafax-config.html hylafax-config(4F)] manual page for a description of the '''UUCPLockType''' configuration parameter.
 
|-
 
| valign="top" | MACHDEPLIBS
 
| Target-dependent libraries that should be used when linking applications. Note that if this parameter is specified configure will append to the list of libraries.
 
|-
 
| valign="top" | MAKECXXOVERRIDE
 
| A special parameter used by configure when constructing Makefiles. This parameter is required when compiling the software with the SunPRO C++ compiler; it works around limitations in the SunPRO compilation environment.
 
|-
 
| valign="top" | MAKEDEPINCLUDE
 
| The keyword used to specify the inclusion of a make dependency file when constructing Makefiles. This parameter is set to MAKEINCLUDE if make dependendcies are to be constructed by the software; otherwise it is set to # so that no make dependency rules are included (and used).
 
|-
 
| valign="top" | MAKEDSOINCLUDE
 
| The keyword used to specify inclusion of a file containing rules for building DSO's. This parameter is set to MAKEINCLUDE if DSO's are to be built; otherwise it is set to # so that nothing is included.
 
|-
 
| valign="top" | MAKEINCLUDE, MAKELQUOTE, MAKERQUOTE
 
| The syntax used to specify an include file for make; e.g. @MAKEINCLUDE@ @MAKELQUOTE@''file''@MAKERQUOTE@. These parameters are normally deduced by configure depending on the capabilities of the make program to use.
 
|-
 
| valign="top" | MANSCHEME
 
|
 
The scheme to use when preparing and installing manual pages. Schemes are constructed according to:
 
 
''organization''''formatting''''compression''''suffix''
 
 
where: <''organization''> is either bsd for BSD-style section organization (e.g. file formats in section 5) or sysv for System V-style organization (e.g. file formats in section 4). <''formatting''> is either nroff to force installation of formatted materials (using nroff) or source to get the nroff source installed. <''compression''> is either the name of a program to compress the manual pages (gzip, compress, pack) or cat for uncompressed data. <''suffix''> is either the file suffix to convert installed pages to (e.g. 0.gz for gzip-compressed pages under BSD) or strip to force the normal ".4f" suffix to be converted to ".4" (or ".5" if using the BSD organization). If no -<suffix> is specified then filenames are not converted when they are installed.
 
|-
 
| valign="top" | PAGESIZE
 
|
 
The default page size that client applications will use for submitted facsimile. Page sizes are specified by name and checked against the pagesizes database installed in the DIR_LIBDATA directory. See also [man/pagesizes.html pagesizes(4F)].
 
|-
 
| valign="top" | PATH_DPSRIP
 
| The absolute pathname of the Display PostScript-based imager program.
 
|-
 
| valign="top" | PATH_EGETTY
 
| The absolute pathname of suitable getty program to exec to deduce the type of an inbound call. Note that this parameter must be set correctly before the software is built; there is no mechanism for doing this through a runtime configuration file. ''This program is not part of HylaFAX; it is provided as a ``hook'' for developers to integrate voice capabilities.''
 
|-
 
| valign="top" | PATH_GETTY
 
| The absolute pathname of suitable getty program to exec to handle an inbound data call. Note that this parameter must be set correctly before the software is built; there is no mechanism for doing this through a runtime configuration file.
 
|-
 
| valign="top" | PATH_GSRIP
 
| The absolute pathname of the Ghostscript-based imager program. Beware that this must be a version of the '''gs''' program that includes the tiffg3 device driver.
 
|-
 
| valign="top" | PATH_IMPRIP
 
| The absolute pathname of the Impressario 2.1-based imager program available for IRIX 6.2 (and beyond) systems.
 
|-
 
| valign="top" | PATH_SENDMAIL
 
| The absolute pathname of the sendmail program on the server machine; sendmail is used by HylaFAX to post mail messages for a variety of reasons.
 
|-
 
| valign="top" | PATH_VGETTY
 
| The absolute pathname of suitable getty program to exec to handle an inbound voice call. Note that this parameter must be set correctly before the software is built; there is no mechanism for doing this through a runtime configuration file. ''This program is not part of HylaFAX; it is provided as a ``hook'' for developers to integrate voice capabilities.''
 
|-
 
| valign="top" | PORTFUNCS
 
| A list of non-standard functions that should be emulated. Normally this list is constructed by configure based on checks it does. If this parameter is set, configure will append to the specified list.
 
|-
 
| valign="top" | PROTOTYPES
 
| Options that should be passed to the C compiler to force it to check for function prototype mismatches. This parameter should not be needed because ANSI C compilers should do this automatically.
 
|-
 
| valign="top" | REGEXINC
 
| The pathname of the directory containing include files for the regular expression package. By default this parameter is set to reference the package included with this distribution.
 
|-
 
| valign="top" | SCRIPT_SH
 
| The absolute pathname of the shell program to use when building HylaFAX and to use to execute certain command scripts. This shell must support the Bourne shell command syntax. Beware that many versions of bash have bugs in them that make them unsuitable for use.
 
|-
 
| valign="top" | SETMAKE
 
| If make does not automatically set $MAKE to the name of the make program to invoke for subdirectories, then configure will create an explicit definition. If this parameter is set, then it will be used instead.
 
|-
 
| valign="top" | SHDLIBC
 
| A special library to use in place of the standard -lc implicitly provided by CC and/or CXX.
 
|-
 
| valign="top" | SIGHANDLERTYPES
 
| The type signatures to use when checking for the correct type for a signal handler. If this parameter is set then configure will check these types before it checks a builtin list of well-known values.
 
|-
 
| valign="top" | SYSGID
 
| The group ID to use for installing non-setgid programs; by default this is chosen according to the target system.
 
|-
 
| valign="top" | SYSUID
 
| The group ID to use for installing non-setuid programs; by default bin is used.
 
|-
 
| valign="top" | TIFFBIN
 
| The pathname of the directory where the TIFF software distribution tools have been installed.
 
|-
 
| valign="top" | TIFFINC
 
| The pathname of the directory where the TIFF software include files have been installed.
 
|-
 
| valign="top" | ZLIBINC
 
| The pathname of the directory containing include files for the zlib distribution. By default this parameter is set to reference the package included with this distribution.
 
|}
 
 
----
 
 
== Troubleshooting Build Problems ==
 
 
Most compilation problems are because the configure script did not properly setup the software for building. If you have problems compiling the software on a ''supported system'' check the output from configure and the contents of the '''port.h''' file generated by configure to make sure it makes sense. Another byproduct of the configuration procedure is the '''config.log''' file that is found at the top of the build tree. This file contains information about the tests done by the configure script; it should also be studied to check for problems.
 
 
The most common problem encountered during building, which is frequently not recognized until later when a program does not work correctly, is when the system include files are lacking proper ANSI C function prototypes. In particular beware of compilation warnings about ``''passing an object as an argument to a function'''', this usually means that a function was defined without a function prototype and then a C++ object was passed through the interface as an argument. For example, if the C library strchr function is declared as
 
 
extern char* strchr();
 
 
instead of the expected
 
 
extern char* strchr(const char*, int);
 
 
then the C++ compiler will not know to do the implicit cast of the first parameter to a const char*; almost certainly causing problems. Unfortunately many older systems do not have system include files that include ANSI C function prototype declarations; if this is true of your system then you are unlikely to get HylaFAX to build correctly.
 
 
----
 
 
== System-specific Guidance ==
 
 
This section contains some build-related issues that are dependent on the operating system installed on the build machine. The information included here is by no means exhaustive; it reflects feedback from users accumulated over multiple HylaFAX versions and/or operating system releases.
 
 
=== AIX Guidance ===
 
 
To use the IBM xlC C++ compiler you must have a version that supports the -+ option so that filenames with a .c++ extension are processed properly by the compiler.
 
 
Under at least AIX 4.2 some socket-related function declarations have been changed to use non-standard types. To workaround compilation problems the CONFIG_SOCKARGLENTYPE configuration parameter should be specified to reflect the appropriate type of the call-by-reference length parameter passed to accept, getpeername, and getsockname.
 
 
=== BSD/OS Guidance ===
 
 
Beware that the standard BSD/OS distributions place many files and applications in non-standard locations. This can cause confusion when HylaFAX is installed because the old applications distributed with BSD/OS may be accidentally run and do the wrong thing. Under BSD/OS 2.1 the following '''config.local''' file may be used to configure a build tree that installs over top of the standard BSD/OS distribution of HylaFAX.
 
 
DIR_BIN="/usr/contrib/bin"              # client apps
 
DIR_MAN="/usr/contrib/man"              # manual pages
 
DIR_AFM="/usr/contrib/lib/hylafax/afm"  # AFM files
 
DIR_LIBDATA="/usr/contrib/lib/hylafax"  # client data
 
DIR_LIBEXEC="/usr/contrib/lib/hylafax"  # libs&hidden apps
 
DIR_SBIN="/usr/contrib/bin"            # system apps
 
DIR_SPOOL="/var/spool/hylafax"              # spooling area
 
PATH_GSRIP="/usr/contrib/bin/gs"        # Ghostscript RIP
 
 
Note that you will also need to specify the location of the TIFF software because the version distributed with BSD/OS 2.1 is too old to use.
 
 
=== Dell SVR4 Guidance ===
 
 
On some releases '''<sys/mkdev.h>''' includes static functions with non-ANSI C definitions; these must be manually corrected before building the software. (The GNU gcc installation procedure attempts to correct this file but does not.)
 
 
The ''ttymon'' program is executable only by root; this may cause the configure script to not select it as the getty program that is started up for inbound data calls. To work around this problem override the default selection through the interactive prompts or by creating a '''config.local''' file that explicitly sets the '''PATH_GETTY''' configuration parameter.
 
 
=== FreeBSD Guidance ===
 
 
FreeBSD 2.0 does not include the file '''<osfcn.h>'''. If the software does not compile without this file a copy can be obtained from the GNU libg++ distribution: ftp://prep.ai.mit.edu/pub/gnu/libg++*.tar.gz, libg++-2.6.2/libg++/src/osfcn.h.
 
 
=== HP-UX Guidance ===
 
 
Under HP-UX 9.05 the standard make incorrectly processes VPATH; either use gmake or configure the software to be built directly in the source tree.
 
 
Some versions of HP-UX define the select system call with parameters that are of type int*; if so set CONFIG_BADSELECTPROTO=yes to work around the problem.
 
 
Some versions of HP-UX have the include file '''<utmpx.h>''' but do not support the extended accounting facilities defined by this file. This confuses the '''configure''' script; to work around the problem set UTMP=utmp when configuring the build environment.
 
 
=== Linux Guidance ===
 
 
Under various versions of Linux; when linking with the -g option; if the linker complains about needing '''libc.so.4''', then it is necessary to setup symbolic links in '''/usr/lib''' so that: '''libg.a''' -> '''libc.a''' and '''libg.sa''' -> '''libc.sa'''.
 
 
Some recent versions of Linux come setup so that when C++ programs are compiled the standard C functions strchr and strrchr (and possibly others) have multiple definitions based on the types of their arguments. This overloading causes compilation problems because HylaFAX assumes the ANSI C definition which specifies a single definition for these functions. To workaround this problem either correct the include file '''<string.h>''' or re-install gcc and/or libg++ (the standard distributions do not cause problems).
 
 
Under Caldera OpenLinux 1.3 (and probably previous 1.x versions) the '''configure''' script fails when testing for TIFF support. To work around the problem use --with-LIBTIFF="-ltiff -ljpeg -lz".
 
 
=== IRIX Guidance ===
 
 
Older versions of the SGI C++ compiler do not correctly handle nested types. If configure complains that the compiler is unsuitable for use or if the software does not build correctly verify that you have an up to date version of the compiler.
 
 
When building the software to use DSOs it may be necessary to set LIBMALLOC=no to avoid conflicts between the memory allocation routines in the standard C library and those in -lmalloc.
 
 
Under IRIX 5.3 '''/bin/sh''' has a bug that causes the faxsetup script to run correctly but terminate with an error. It may be preferrable to set SCRIPT_SH=/bin/ksh though it is not necessary.
 
 
=== SCO Guidance ===
 
 
These notes pertain to SCO 3.2 v4.2; they may also be relevant to other versions.
 
 
With gcc 2.7.2.1 one gcc include file needs to be patched to include missing function prototypes:
 
 
 
*** /usr/local/lib/gcc-lib/i486-unknown-sco3.2v4.2/2.7.2.1/include/sys/signal.h Thu Sep  5 18:26:45 1996
 
--- /usr/local/lib/gcc-lib/i486-unknown-sco3.2v4.2/2.7.2.1/include/sys/signal.h.old Thu Sep  5 18:28:56 1996
 
***************
 
*** 214,221 ****
 
  #else
 
  int kill(short, int);
 
  #endif
 
! int (*ssignal(int, int(*)(int)))(int);
 
! void (*sigset(int, SIG_TYP))(int);
 
 
  int sigpause(int); /* These 4 are SVID functions as well */
 
  int sighold(int);
 
--- 214,221 ----
 
  #else
 
  int kill(short, int);
 
  #endif
 
! int (*ssignal(int, int(*)(int)))();
 
! void (*sigset(int, SIG_TYP))();
 
 
  int sigpause(int); /* These 4 are SVID functions as well */
 
  int sighold(int);
 
 
 
When running configure disable the use of ranlib by specifying -with-RANLIB=true on the command line or in a '''config.local''' file.
 
 
Some of SCO's system include files have incorrect function prototypes that cause compilation to fail; other include files are not properly setup to deal with their being included multiple times. The following diffs may be applied to the problematic system include files or one may create patched copies of these files in a private '''sys''' directory under the top level of the HylaFAX build tree.
 
 
 
*** /usr/include/sys/stat.h Wed Mar  9 00:00:00 1994
 
--- sys/stat.h Thu Sep  5 18:45:25 1996
 
***************
 
*** 147,153 ****
 
  extern int  lstat(const char *, struct stat *);
 
  extern int  fstat(int, struct stat *);
 
  extern int  mkdir(const char *, mode_t);
 
! extern int  mkfifo(char *, mode_t);
 
  extern mode_t  umask(mode_t);
 
  #ifdef __cplusplus
 
  };
 
--- 147,153 ----
 
  extern int  lstat(const char *, struct stat *);
 
  extern int  fstat(int, struct stat *);
 
  extern int  mkdir(const char *, mode_t);
 
! extern int  mkfifo(const char *, mode_t);
 
  extern mode_t  umask(mode_t);
 
  #ifdef __cplusplus
 
  };
 
*** /usr/include/sys/time.h Fri Mar 27 05:05:45 1992
 
--- sys/time.h Thu Sep  5 19:42:08 1996
 
***************
 
*** 32,41 ****
 
--- 32,44 ----
 
  #ifndef __sys_time_h__
 
  #define __sys_time_h__
 
 
+ #ifndef _STRUCT_TIMEVAL_
 
+ #define _STRUCT_TIMEVAL_
 
  struct timeval {
 
  long            tv_sec; /* seconds */
 
  long            tv_usec;/* and microseconds */
 
  };
 
+ #endif /* _STRUCT_TIMEVAL_ */
 
 
  struct timezone {
 
  int            tz_minuteswest; /* minutes west of Greenwich */
 
*** /usr/include/sys/select.h Wed Mar  9 00:00:00 1994
 
--- sys/select.h Thu Sep  5 19:41:13 1996
 
***************
 
*** 38,47 ****
 
--- 38,50 ----
 
  /*
 
  * Structure used to specify timeout in select(2) system call.
 
  */
 
+ #ifndef _STRUCT_TIMEVAL_
 
+ #define _STRUCT_TIMEVAL_
 
  struct timeval {
 
  long tv_sec; /* seconds */
 
  long tv_usec; /* and microseconds */
 
  };
 
+ #endif /* _STRUCT_TIMEVAL_ */
 
 
  #ifndef _INKERNEL
 
  #ifdef _NO_PROTOTYPE
 
 
 
These notes pertain to SCO 3.2 v5.0
 
 
One of SCO's system include files has incorrect function prototypes that cause compilation to fail; The following diff may be applied to the problematic system include file or one may create a patched copy of the file in a private '''sys''' directory under the top level of the HylaFAX build tree.
 
 
 
*** /usr/include/sys/syslog.h Thu Dec 26 04:42:27 1996
 
--- sys/syslog.h Fri Dec 27 17:05:11 1996
 
***************
 
*** 198,204 ****
 
  void closelog __P((void));
 
  void openlog __P((const char *, int, int));
 
  int setlogmask __P((int));
 
! int vsyslog __P((int, char *, va_list ));
 
  __END_DECLS
 
 
  #endif /* !INKERNEL */
 
--- 198,204 ----
 
  void closelog __P((void));
 
  void openlog __P((const char *, int, int));
 
  int setlogmask __P((int));
 
! int vsyslog __P((int, const char *, va_list ));
 
  __END_DECLS
 
 
  #endif /* !INKERNEL */
 
 
 
=== Solaris Guidance ===
 
 
Under (at least) Solaris 2.3 the standard make does VPATH processing incorrectly for files passed to the mkdepend script (the last file in the list is not converted to a pathname relative to the source directory); this causes lots of msgs that can be safely ignored.
 
 
Some versions of Solaris include an old version of the TIFF library with the OpenWindows software. This can cause problems when running the configure script unless the LD_LIBRARY_PATH environment variable is explicitly set to reference the location of the newer TIFF library DSO or the path is explicitly set with a -R flag in the LIBTIFF configuration parameter.
 
 
=== Ultrix Guidance ===
 
 
[Ed: this information comes from Tom Lislegaard.]
 
 
Extensive work is required to get the software built and working. The following comments apply to at least Ultrix 4.4. These notes relate to building and running HylaFAX Version 3.0 with gcc-2.6.3 and libg++-2.6.2.
 
 
Two header files cause problems: '''termios.h''' and '''sys/socket.h'''.
 
 
'''termios.h''' defines tcsetattr, tcgetattr, etc in terms of macros that map to ioctl's; this causes problems with the configure script. As the real functions are present in libc, working around this problem is just a matter of bringing the include file up to date. (When compiling with GNU gcc the file to patch is normally '''/usr/local/lib/gcc-lib/mips-dec-ultrix4.4/2.6.3/include/sys'''):
 
 
123,125d122
 
< #if !defined(_POSIX_SOURCE)
 
< #define tcsetattr(fildes,action,termios_p) \
 
< ioctl(fildes,action,termios_p)
 
127,133d123
 
< #define tcgetattr(fildes,termios_p) \
 
< ioctl(fildes,TCGETP,termios_p)
 
< #else
 
< extern int tcsetattr();
 
< extern int tcgetattr();
 
< #endif
 
 
<
 
147,152d136
 
< #if !defined(_POSIX_SOURCE)
 
< #define tcdrain(fildes) \
 
< ioctl(fildes,TCSBRK,-1)
 
< #else
 
< extern int tcdrain();
 
< #endif
 
161,166d144
 
< #if !defined(_POSIX_SOURCE)
 
< #define tcflush(fildes,queue) \
 
< ioctl(fildes,TCFLSH,queue)
 
< #else
 
< extern int tcflush();
 
< #endif
 
176,181d153
 
< #if !defined(_POSIX_SOURCE)
 
< #define tcflow(fildes,action) \
 
< ioctl(fildes,TCXONC,action)
 
< #else
 
 
< extern int tcflow();
 
< #endif
 
183,189d154
 
< /*
 
<  * Get input and output baud rates.
 
<  */
 
< #if !defined(_POSIX_SOURCE) && !defined(_XOPEN_SOURCE)
 
< #define OBAUD (CBAUD << 16)
 
< #define cfgetospeed(termios_p) \
 
< (((termios_p)->c_cflag & OBAUD) >> 16)
 
191,198c156,160
 
< #define cfgetispeed(termios_p) \
 
< ((termios_p)->c_cflag & CBAUD)
 
 
< #else
 
< extern speed_t cfgetospeed();
 
< extern speed_t cfgetispeed();
 
< extern int cfsetispeed();
 
< extern int cfsetospeed();
 
< #endif
 
---
 
> extern int tcsetattr(int, int, const struct termios*);
 
> extern int tcgetattr(int, struct termios*);
 
> extern int tcdrain(int);
 
> extern int tcflush(int, int);
 
> extern int tcflow(int, int);
 
199a162
 
> extern  int tcsendbreak _PARAMS((int, int));
 
 
'''/usr/include/sys/socket.h''' needs to be protected against multiple inclusion:
 
 
2a3,4
 
> #ifndef _SOCKET_
 
> #define      _SOCKET_
 
237a240
 
> #endif /* _SOCKET_ */
 
 
Many of the tools provided with Ultrix are outdated, functionally crippled, or just buggy. Affected here are sh, make, expr, and sed.
 
 
configure must be run by ksh; e.g.
 
 
 
% ksh configure
 
 
 
There is no hope for using '''/bin/sh''', it does not support shell functions. The good news is that the current '''/bin/ksh''' handles all the scripts as well, so it is not necessary to install bash; simply use
 
 
 
SCRIPT_SH=/bin/ksh
 
 
 
A recent version of GNU make must be used (I have used version 3.67).
 
 
A replacement expr program is found in the GNU Shell Utilities package; it is needed in place of the default system version. Likewise for sed; I have used GNU Version 2.05.
 
 
The syslogd and printf programs are not available on Ultrix. On a host running only client software (no local modem) these may be ignored. On a server machine these are required.
 
 
The standard syslog support can not handle the HylaFAX server processes (or any other modern software for that matter). It should be replaced with a newer syslogd. Several alternatives are available, the stuff I have used can be found at ftp://gatekeeper.dec.com:/pub/DEC/jtkohl-syslog-complete.tar.Z.
 
 
(A note here: on my system I have done a complete replacement, including putting new syslog functions in my libc.a. This means that I have not tried to build with the '''port/syslog.c''' support included with HylaFAX; though it should be equivalent).
 
 
=== UnixWare Guidance ===
 
 
One system include file needs to be patched to correct function prototypes:
 
 
<pre>
 
*** /usr/include/netdb.h Mon Dec 11 05:25:35 1995
 
--- netdb.h Wed Oct 30 14:05:35 1996
 
***************
 
*** 90,105 ****
 
 
  #ifdef __STDC__
 
 
! extern struct hostent *gethostbyname(char *);
 
  extern struct hostent *gethostbyaddr(char *, int, int);
 
  extern struct hostent *gethostent(void);
 
  extern struct netent *getnetbyname(char *);
 
  extern struct netent *getnetbyaddr(long, int);
 
  extern struct netent *getnetent(void);
 
! extern struct servent *getservbyname(char *, char *);
 
  extern struct servent *getservbyport(int, char *);
 
  extern struct servent *getservent(void);
 
! extern struct protoent *getprotobyname(char *);
 
  extern struct protoent *getprotobynumber(int);
 
  extern struct protoent *getprotoent(void);
 
  extern int endhostent(void);
 
--- 90,105 ----
 
 
  #ifdef __STDC__
 
 
! extern struct hostent *gethostbyname(const char *);
 
  extern struct hostent *gethostbyaddr(char *, int, int);
 
  extern struct hostent *gethostent(void);
 
  extern struct netent *getnetbyname(char *);
 
  extern struct netent *getnetbyaddr(long, int);
 
  extern struct netent *getnetent(void);
 
! extern struct servent *getservbyname(const char *, const char *);
 
  extern struct servent *getservbyport(int, char *);
 
  extern struct servent *getservent(void);
 
! extern struct protoent *getprotobyname(const char *);
 
  extern struct protoent *getprotobynumber(int);
 
  extern struct protoent *getprotoent(void);
 
  extern int endhostent(void);
 
</pre>
 
 
On some versions the configuration parameter CONFIG_SOCKARGLENTYPE needs to be set to size_t to force the argument type for call-by-reference parameters to the socket-related system calls; this should automatically be done by '''configure'''.
 
 
{| width="100%"
 
|
 
[setup.html [[Image:next.gif]] How to setup a HylaFAX server and prepare it for use].
 
|
 
[toc.html [[Image:back.gif]] HylaFAX table of contents].
 
|}
 
 
----
 
[mailto:webmaster@hylafax.org webmaster@hylafax.org]. Last updated $Date: 2002/05/02 22:02:56 $.
 
  
 
===Which Linux distributions contain HylaFAX?===
 
===Which Linux distributions contain HylaFAX?===
Line 1,270: Line 115:
 
> I'd like to have a kind of "static" graphic in the background of every<br />
 
> I'd like to have a kind of "static" graphic in the background of every<br />
 
> page hylafax sends. This could be a company-logo, for instance but as<br />
 
> page hylafax sends. This could be a company-logo, for instance but as<br />
> well a complete "letter-template". Insteed of printing the text via a<br />
+
> well a complete "letter-template". Instead of printing the text via a<br />
 
> printer on this template you should be able to "print" your text<br />
 
> printer on this template you should be able to "print" your text<br />
 
> directly on a virtual paper which already contain the company logo and<br />
 
> directly on a virtual paper which already contain the company logo and<br />
Line 1,322: Line 167:
 
===Why are my faxes failing with "Kill time expired"?===
 
===Why are my faxes failing with "Kill time expired"?===
  
The default kill time of a job is 3 hours. If HylaFAX can't send a fax before that deadline, it is rejected. There are two major reasons for this to happend:
+
The default kill time of a job is 3 hours. If HylaFAX can't send a fax before that deadline, it is rejected. There are two major reasons for this to happen:
  
 
* No faxes are being sent at all. This is generally because faxgetty is not running and you didn't use faxmodem so HylaFAX has no modem available to send the job. The solution is to start faxgetty.
 
* No faxes are being sent at all. This is generally because faxgetty is not running and you didn't use faxmodem so HylaFAX has no modem available to send the job. The solution is to start faxgetty.
Line 1,345: Line 190:
  
 
Some modem can have their blacklist cleared with an AT command, while others require the modem to be power cycled.
 
Some modem can have their blacklist cleared with an AT command, while others require the modem to be power cycled.
 +
 +
===Why are my fax sends failing with 'textfmt: No font metric information found for "Courier-Bold"' (or similar) ===
 +
 +
You need the afm-tar.Z file for the Adobe Font Metric (AFM) fonts required by the sendfax program. You can get this file via FTP from sgi.com. Some HylaFAX distributions do not include these Metric files. A subset of these fonts is available via FTP from sgi.com in the file ftp://ftp.sgi.com/sgi/fax/binary/. If you do not install the AFM files into the location specified in the "FontPath' directive in your hyla.conf file, you get error messages about fonts not found.
 +
You can uncompress the file with 'uncompress'.
  
 
==Receiving faxes==
 
==Receiving faxes==
Line 1,404: Line 254:
  
 
===Why do faxes sometimes go to the wrong number?===
 
===Why do faxes sometimes go to the wrong number?===
One possibility is that you have another device on the same line that tried to call that wrong number just before HylaFAX tried to send it's fax. When HylaFAX dialed it's number, the call was already dispatched to the wrong number and the tone sent by HylaFAX's modem did nothing (they may make the other device to hang up). Then when the party called by the other device answered, the call was established with HylaFAX and you get a fax sent to the wrong  
+
One possibility is that you have another device on the same line that tried to call that wrong number just before HylaFAX tried to send it's fax. When HylaFAX dialed its number, the call was already dispatched to the wrong number and the tone sent by HylaFAX's modem did nothing (they may make the other device to hang up). Then when the party called by the other device answered, the call was established with HylaFAX and you get a fax sent to the wrong  
 
number.
 
number.
  
Line 1,417: Line 267:
 
If you already have this line, try commenting it.
 
If you already have this line, try commenting it.
  
===Why aren't emails being sent when using faxrcvd on the command line works?===
+
===Why aren't emails being sent when using faxrcvd while the command line works?===
 
Your rights setting for sendmail is probably incorrect.
 
Your rights setting for sendmail is probably incorrect.
 
This means that your group rights doesn't change to smmsp and you therefore don't have rights to /var/spool/clientmqueue. Check the sticky bit for the group used by the sendmail program.
 
This means that your group rights doesn't change to smmsp and you therefore don't have rights to /var/spool/clientmqueue. Check the sticky bit for the group used by the sendmail program.
Line 1,434: Line 284:
  
 
===Notification messages with other languages (I18N)===
 
===Notification messages with other languages (I18N)===
To change the language in the e-mail notification messages from the server you must change the following.
+
To change the language in the e-mail notification messages from the server you can do the following (since version 4.3.0).
Edit the files  
+
 
/var/spool/fax/bin/FaxDispatch,
+
Edit the files
/var/spool/fax/bin/faxrcvd,
+
<pre>
/var/spool/fax/bin/notify,
+
/var/spool/fax/bin/FaxDispatch  
 +
/var/spool/fax/bin/faxrcvd  
 +
/var/spool/fax/bin/notify
 +
</pre>
 
write the line:
 
write the line:
TEMPLATE=de (as example for german language).
+
<pre>
 +
TEMPLATE=de
 +
</pre>
 +
(as example for german language). That replace the path-var $TEMPLATE in the scripts.
  
That replace the path-var $TEMPLATE in the scripts.
+
The file ./FaxDispatch you can read in the [http://www.hylafax.org/man/current/faxrcvd.1m.html faxrcvd man page].
  
The file ./FaxDispatch you can read in the man faxrcvd.
+
In the /var/spool/fax/etc/templates directory resides the language specific subdirs. Here you can change whatever you want. Note: make a backup before change!
  
 
==Sendpage - SMS & Pager Gateway==
 
==Sendpage - SMS & Pager Gateway==
  
===The log shows that the SMS is sent correctly, but it never gets delivered to the adressed cell phone===
+
===The log shows that the SMS is sent correctly, but it never gets delivered to the addressed cell phone===
  
 
Check for trailing spaces in the pagermap file
 
Check for trailing spaces in the pagermap file
Line 1,456: Line 312:
 
Check the file for the Call Centers Number in hylafax info dir, there should be an option &pagerTTYParity:"none" in there if there isnt add it and try again
 
Check the file for the Call Centers Number in hylafax info dir, there should be an option &pagerTTYParity:"none" in there if there isnt add it and try again
  
===When calling D2 i get an 'No initial ID response from paging central' but I have added &pagerTTyParity:"none" to the file in info===
+
===When calling D2 I get an 'No initial ID response from paging central' but I have added &pagerTTyParity:"none" to the file in info===
  
 
Check if you have added &pagingProtocol:"ucp" to the info file
 
Check if you have added &pagingProtocol:"ucp" to the info file
Line 1,462: Line 318:
 
===The call center is rejecting my messages Blocks===
 
===The call center is rejecting my messages Blocks===
  
Check if you are really sending plain ASCII files, this happened to me when working with templates generated on an windows box and it turned out the templates werent plain ASCII
+
Check if you are really sending plain ASCII files, this happened to me when working with templates generated on an windows box and it turned out the templates weren't plain ASCII
  
 
===Does HylaFAX support the UCP protocol for SMS?===
 
===Does HylaFAX support the UCP protocol for SMS?===
Line 1,515: Line 371:
 
Your best option presently is to use Lee Howard's [http://sourceforge.net/projects/iaxmodem IAXmodem] with Steve Underwood's spandsp library. For more information, see:
 
Your best option presently is to use Lee Howard's [http://sourceforge.net/projects/iaxmodem IAXmodem] with Steve Underwood's spandsp library. For more information, see:
  
http://voip-info.org/tiki-index.php?page=Asterisk%20fax
+
<strike>http://voip-info.org/tiki-index.php?page=Asterisk%20fax</strike>
 +
 
 +
See also a nice detailed howto here:
 +
http://www.the-asterisk-book.com/unstable/faxserver-mit-iaxmodem-und-hylafax.html
  
 
===How can I fax Microsoft Office files?===
 
===How can I fax Microsoft Office files?===
 
One way to easily fax Windows files is by using a HylaFAX Windows client. Please see the [[Client Software]] page for a complete list of free and commercial clients.
 
One way to easily fax Windows files is by using a HylaFAX Windows client. Please see the [[Client Software]] page for a complete list of free and commercial clients.
 +
 +
 +
===How can I improve the resolution quality of incoming faxes?===

Latest revision as of 13:32, 2 November 2016

This is a living list of frequently asked questions about the HylaFAX fax software system.

Your comments, additions and fixes to the FAQ are welcome: please send them to faq@hylafax.org. You can also give feedback on specific questions through links provided on each individual page. If you cannot find the information you need here or in the archives, please subscribe to the community mailing list and ask for help there.

Contents

HYLAFAX

What is HylaFAX?

See About HylaFAX for more information.

Where did HylaFAX/FlexFAX come from?

Sam Leffler, while working at Silicon Graphics (SGI), wrote a fax server for SGI's IRIX servers called FlexFAX and released it to the public in 1991. Sam and others worked for several years on FlexFAX, adding new features and porting the software to new platforms. In 1995 FlexFAX was renamed HylaFAX to avoid potential trademark issues. Sam eventually decided to leave the project to pursue other interests which, even with the best intentions of the HylaFAX developers, caused development to slow dramatically. In 1998 HylaFAX development was revitalized by the creation of hylafax.org, a central repository for HylaFAX development, downloads, documentation, etc. and the project remains very active to this day.

So, to answer the question: HylaFAX, nee FlexFAX, was born of Sam Leffler and through the hard work and contributions of many other people, has grown to become what it is today.

Some old newsgroup postings that may be of interest:

Original FlexFAX announcement (mirrored here)

Announcement of hylafax.org (mirrored here)

Why is it called HylaFAX?

The name of this software package is "HylaFAX", not "hylafax", "Hylafax", or anything else. Also, do not call this software by its old name "FlexFAX" because that name is a trademark of another fax product and the folks that own that trademark are possessive. Please also note that "HylaFAX" is a trademark of Silicon Graphics and it should be treated as such when used in documentation.

Regarding the name, it is derived from the word hyla which is defined as "Any of a genus of (Hyla) of frogs, especially the tree frog." Hence the logo found on the home page for this software.

Finally, please recognize that this is free software that represents the work of many people. The section of "Acknowledgements" lists those people that have made significant contributions.

Why should I use HylaFAX instead of some other fax package?

HylaFAX is designed to be very robust and reliable. The fax server is designed to guard against unexpected failures in the software, in the configuration, in the hardware, and in general use. HylaFAX uses an intelligent scheduling policy that attempts to recognize different types of failures and optimize retry attempts. An important design goal is that users must never worry about transmit jobs being lost or mishandled: jobs are either completed successfully or the submitter is notified what happened to their job and why the job failed. If you are willing to shepherd your facsimile transmissions then other software packages may be more suitable for you.

HylaFAX supports a wide variety of modems and is designed to support any Class 1, 1.0, 2, 2.0, or 2.1 modem without modification to the source code. If you have a modem that provides only a Class 1 interface then HylaFAX is likely to be the only freely available software package that will work with your modem.

HylaFAX supports multiple modems and heavy traffic load. If you expect to send or receive more than 1 or 2 facsimile a day, then HylaFAX is likely to be the best package for you to use.

HylaFAX is expressly designed to be highly configurable without modification or access to the source code. The software comes with extensive documentation to assist in understanding how the software functions and how to configure it.

HylaFAX is freely available. There is no GNU copyleft policy. There are no requests for remuneration, constraints on use, or constraints on incorporation into products (compare this with other "freely available fax packages"). There are binary distribution packages or other formats for several Unixes.

Which modems can I use with HylaFAX?

HylaFAX is intended to be used with fax modems. Fax modems are not the same as data modems though most contemporary data modems also include support for fax communication. HylaFAX should work with any Class 1, 1.0, 2, 2.0 or 2.1 fax modem. Wherever possible HylaFAX works around known modem problems or restricts modem usage in order to provide a functioning system.

See Handbook:Choosing a Modem for more information.

What machines does HylaFAX run on?

HylaFAX is intended to run on any UNIX system that supports a particular set of features: FIFO special files, BSD-style sockets and the TCP/IP communication protocols, BSD-style file locking (flock) or equivalent functionality from which it can be emulated (fcntl, lockf), and POSIX 1003.1-style interfaces, including termios for manipulating tty devices.

The following systems are known to have these features: AIX v3.x, v4.x BSD/386, FreeBSD, HP-UX 9.x, 10.x IRIX, ISC4.0, Linux, OSF/1 V1.3 and V3.0, SCO 3.2v4 with TCP/IP, SCO ODT 3, SCO 5.0, Solaris 2.x, SunOS 4.1.x, SVR4.x on an Intel x86 and MIPS (UnixWare, Onsite, SINIX, ...), Ultrix 4.4.

How to tell which HylaFAX version you have?

If you need to refer to this specific software, you should identify it as:

HylaFAX v<version><n>

where <version> is found in the file VERSION and <n> is the number recorded in dist/hylfax.alpha. This string is also prominently displayed when you run the configure script to setup the software for compilation and each time the faxq scheduler process is started (look in the file where syslog messages are recorded).

What documentation is available?

HylaFAX™ comes with extensive documentation in two forms: this HTML-based documentation that is designed for on-line use and general guidance, and a complete set of UNIX manual pages that contain reference information in a more terse but precise format. The HTML documentation contains links to the manual pages providing a complete hypertext connection between the two forms of documentation.

The HylaFAX documentation is intended to support users of binary distributions; it is complete enough that access to the source code is not needed.

How should I report bugs?

Unconfirmed HylaFAX bugs and related questions should be sent by mail to the HylaFAX mailing list hylafax-users@hylafax.org.

Confirmed bugs and discussion items regarding security or technical-level matters should either be sent by mail to the HylaFAX development mailing list hylafax-devel@hylafax.org or posted directly to HylaFAX Bugzilla, http://bugs.hylafax.org/bugzilla.

When corresponding about the software please always specify:

  • What version of HylaFAX you have
  • What compiler (including version) your are using
  • What system you are running on: system type and OS version
  • What kind of modem and the modem firmware revision
  • A description on how to reproduce the problem
  • A minimal trace log that shows your problem

For example: "HylaFAX v4.0pl2 under Solaris 2.3 with gcc 2.7.2; ZyXEL 1496E with 6.11a firmware."

Do not send large trace log or PostScript files to the mailing list; the list is quite large.

Do not send traces with binary i/o or timer tracing.

Do not send traces without time-stamps and do not remove lines in the trace.

Can I run HylaFAX on my NT/Windows Server?

Date: Tue, 10 Dec 1996 07:49:56 +0100 (MET) From: Matthias Apitz <guru@softcon.de > Subject: Re: HylaFax

>Mark Bradley wrote:

>Can I run HylaFax on my NT 4.0 Server? >S.Mark Bradley >Compucare Services

NO. (NT is not the answer, it's the question and the answer is NO :-))

matthias

Is HylaFAX able to receive/send 1000s of faxes/day?

Yes. When HylaFAX is described as "Enterprise Class" we mean it. The software itself is more than capable of handling the most demanding fax traffic requirements; 96 channels per server is routinely achieved. For high-density fax servers it is recommended to look at digital (TE/E1) fax boards.

Building From Source and Installation

Which Linux distributions contain HylaFAX?

Please see (and contribute to) the Distribution List.

Sending Faxes

How do I print a watermark on my faxes?

Thorsten Garrels wrote:

> I'd like to have a kind of "static" graphic in the background of every
> page hylafax sends. This could be a company-logo, for instance but as
> well a complete "letter-template". Instead of printing the text via a
> printer on this template you should be able to "print" your text
> directly on a virtual paper which already contain the company logo and
> locations.

Date: 13 March 2000 18:46
From: Frank Terhaar-Yonkers <fty@cisco.com>
Subject: Re: flexfax: background graphic for every sent page

What you want is a "watermark." This little postscript snippet prints CONFIDENTIAL diagonally across the page:

/wp$y 792 def
/wp$x 612 def
%-------Customize Here-------
/font /Helvetica-Bold def
/pointsize 96 def
/text1 (CONFIDENTIAL) def
%-------End Customization----
/center {dup stringwidth pop
2 div neg 0 rmoveto} def
wp$x 2 div wp$y 2 div pointsize 2 div sub moveto
.85 setgray
font findfont pointsize scalefont setfont
45 rotate
0 0 text1 center ashow
%

Merge something like this (a exercise left to someone else) with the postscript sent to Hylafax.

- Frank

How do I keep private information off the cover page?

To keep private information off of the fax cover sheet and out of the publicly displayed information (such as the queue listings shown by faxstat) you need to create a dialrules file that's used on systems where HylaFAX client applications are run.

For example, if calling card information is specified as a trailing comma-prefixed number string (perhaps with trailing whitespace) then the following rules would strip it off when creating an displayable representation of the dial string:

DisplayNumber = [
 ",[0-9]+[ 	]*" = ! strip calling card info and trailing ws
]

You can use the dialtest program to test the new rules.

If you don't use sendfax to submit your faxes, you will have to look in your submitting software manual for how to set this.

Note that on the server the session logs must be protected to insure the complete dialstrings are not readable by normal users. This is done using the LogFileMode configuration parameter; e.g. LogFileMode: 600 # protect logs with calling card info

Why are my faxes failing with "Kill time expired"?

The default kill time of a job is 3 hours. If HylaFAX can't send a fax before that deadline, it is rejected. There are two major reasons for this to happen:

  • No faxes are being sent at all. This is generally because faxgetty is not running and you didn't use faxmodem so HylaFAX has no modem available to send the job. The solution is to start faxgetty.
  • You sent a big batch of faxes and some were rejected with this reason. You need to set a bigger killtime for the job if you want to send big batches of faxes. With sendfax, it can be set on the command line with -k as in sendfax -k "now + 7 days" or in hyla.conf (or sendfax.conf) with KillTime: "now + 7 days".

This setting in hyla.conf only applies to the clients that come with HylaFAX (faxmail, sendfax). Overwrite Client-settings with Per-job Controls (JobControl).

Why are my faxes failing with "Blacklisted" errors?

Some countries have legislations requiring modem manufacturers to ensure modems can't dial a failed number too often in a short period of time. Even busy numbers may count toward the blacklist in some countries.

Some modem have commands to either disable blacklisting or to clear the blacklist table. You can try one of the following dialing commands in your device config file:

ModemDialCmd: AT%%TCBDT%s [for Rockwell/Conexant modems]
ModemDialCmd: AT%%T21,1d,0DT%s [for Lucent/Agere modems]
ModemDialCmd: AT%%D0DT%s [for TOPIC chipset modems]

If none of those are applicable, you can configure your modem with a different country setting, one that doesn't blacklist numbers. If the dial tone in use in your country differ from the one your modem is configured to use, it may be unable to detect dialtone. Changing the dialing command to add X3 should bypass this problem:

ModemDialCmd: ATX3DT%s


Some modem can have their blacklist cleared with an AT command, while others require the modem to be power cycled.

Why are my fax sends failing with 'textfmt: No font metric information found for "Courier-Bold"' (or similar)

You need the afm-tar.Z file for the Adobe Font Metric (AFM) fonts required by the sendfax program. You can get this file via FTP from sgi.com. Some HylaFAX distributions do not include these Metric files. A subset of these fonts is available via FTP from sgi.com in the file ftp://ftp.sgi.com/sgi/fax/binary/. If you do not install the AFM files into the location specified in the "FontPath' directive in your hyla.conf file, you get error messages about fonts not found. You can uncompress the file with 'uncompress'.

Receiving faxes

receive faxes

You can find a list of fax viewers at Fax Viewer Software.

Another possibility is to convert the received fax to PostScript or PDF and use a PostScript/PDF viewer.

I have trouble viewing faxes received in JBIG format

Newer versions of HylaFAX can receive faxes in JBIG format, yet tiff utilities may not be able to do anything with such faxes (libtiff needs to be patched to support JBIG faxes). No tiff viewer are known to be able to read such files either.

You can disable JBIG support by setting "Class1JBIGSupport: no" in your modem config file until you have utilities to work with JBIG tiff files.

See http://bugs.hylafax.org/bugzilla/show_bug.cgi?id=730 for more information on this.

Running a HylaFAX Server

"Service not available, remote server closed connection?"

> After running
> faxmodem to setup my modem, I run faxstat to make sure that it's up, and
> receive the following msg:
>
> Service not available, remote server closed connection
>
> Telneting in to the machine on port 4559 gets a "Connection closed by
> foreign host." message.

Looks like hfaxd(1) isn't running on your machine. You have to make sure that hfaxd(1) and faxq(1) is running before you get any decent response with faxstat(1).

Do I have to restart a server after changing the modem config file?

No. The HylaFAX servers will re-read a config file (if needed) before each send and on any reset. This means you only need to explicitly restart a server if you change it before doing a receive. You can also avoid restarting it if you use cu/tip to talk to the modem since this will cause the server to wakeup and then reset itself when you exit from cu/tip.

How do I suppress or amend the "Fax Usage Report" which is emailed to FaxMaster daily?

Chances are you've installed a HylaFAX package, such as an RPM, that has set this report up as a cron job. On Red Hat, look at /etc/cron.daily/hylafax, and comment out the faxcron line. Each package/distro will be different, but the genral process is the same - find the cron job and deactivate (or customize) the running of it.

What hardware is supported by HylaFax?

That's hard to answer. Most Class 1, 1.0, 2, 2.0, and 2.1 fax devices will work with HylaFAX with varying levels of success. You can get a relatively good idea of the best hardware to use with HylaFAX via the Hardware Compatibility List or at http://shop.ifax.com.

Troubleshooting

Is support available for HylaFAX?

There are many support options, both free and commercially provided. Please see the Support page for more information.

Why are all my received TIFFs corrupted?

If you're not able to open received TIFF files and when you try to convert them to ps using tiff2ps or fax2ps, you get errors like:

Fax3Decode2D: fax00013.tif: Bad code word at scanline 0 (x 89).
Fax3Decode2D: fax00013.tif: Uncompressed data (not supported) at scanline 0 (x 0).
Fax3Decode2D: Warning, fax00013.tif: Premature EOL at scanline 0 (got 89, expected 1728).

Check the verison of libtiff you're running. If it's 3.6.0 or 3.6.1, this may be your problem.

Solution: Downgrade libtiff to 3.5.7.

Why do faxes sometimes go to the wrong number?

One possibility is that you have another device on the same line that tried to call that wrong number just before HylaFAX tried to send it's fax. When HylaFAX dialed its number, the call was already dispatched to the wrong number and the tone sent by HylaFAX's modem did nothing (they may make the other device to hang up). Then when the party called by the other device answered, the call was established with HylaFAX and you get a fax sent to the wrong number.

There exist line sharing devices that you can use so that this won't happen. The device gives a busy signal when the line is already in use by another device.

How to fix HDLC errors with t38modem?

Not all versions of t38modem use the default Class1FrameOverhead of 4 (which is normal for a modem correctly implementing the Class 1 interface). Try adding the following line in your device config file:


Class1FrameOverhead:   2

If you already have this line, try commenting it.

Why aren't emails being sent when using faxrcvd while the command line works?

Your rights setting for sendmail is probably incorrect. This means that your group rights doesn't change to smmsp and you therefore don't have rights to /var/spool/clientmqueue. Check the sticky bit for the group used by the sendmail program.

/usr/sbin/sendmail may point to /etc/alternatives/mta which probably points to /usr/sbin/sendmail.sendmail

ls -l /usr/sbin/sendmail.sendmail should list

-rwxr-sr-x ? root smmsp ???? ?? ???? /usr/sbin/sendmail.sendmail

If the s bit is not set or group is not smmsp then use following commands.

chgrp smmsp /usr/sbin/sendmail.sendmail

chmod g+s /usr/sbin/sendmail.sendmail

Notification messages with other languages (I18N)

To change the language in the e-mail notification messages from the server you can do the following (since version 4.3.0).

Edit the files

/var/spool/fax/bin/FaxDispatch 
/var/spool/fax/bin/faxrcvd 
/var/spool/fax/bin/notify

write the line:

TEMPLATE=de

(as example for german language). That replace the path-var $TEMPLATE in the scripts.

The file ./FaxDispatch you can read in the faxrcvd man page.

In the /var/spool/fax/etc/templates directory resides the language specific subdirs. Here you can change whatever you want. Note: make a backup before change!

Sendpage - SMS & Pager Gateway

The log shows that the SMS is sent correctly, but it never gets delivered to the addressed cell phone

Check for trailing spaces in the pagermap file

When calling the SMS Call Center (D1, D2, E-plus) I get an 'No initial ID response paging central'

Check the file for the Call Centers Number in hylafax info dir, there should be an option &pagerTTYParity:"none" in there if there isnt add it and try again

When calling D2 I get an 'No initial ID response from paging central' but I have added &pagerTTyParity:"none" to the file in info

Check if you have added &pagingProtocol:"ucp" to the info file

The call center is rejecting my messages Blocks

Check if you are really sending plain ASCII files, this happened to me when working with templates generated on an windows box and it turned out the templates weren't plain ASCII

Does HylaFAX support the UCP protocol for SMS?

Yes. See hylafax(1):

Support is provided for transmitting alpha-numeric mes-
sages to pager devices or GSM mobiles using the  Simple
Network  Paging Protocol (SNPP) and the IXO or UCP pro-
tocol (for message delivery).

Is there an application to redirect emails to pages?

Date: Tue, 1 Oct 1996 15:01:55 -0600 (MDT)
From: Jason Kohles <robobob@xmission.com>
Subject: Re: Sendpage and Mail

On Tue, 1 Oct 1996, Ravi Pina wrote:

> Is there a mail2page application that exists where there is an alais
> setup to redirect mail messges to pages?

I use filter (the mail filtering software that comes with elm) with a filter like this:

### email pager - bitchin
if [ SUBJECT CONTAINS "URGENT" ] then executec "/usr/local/bin/sendpage 
-p XXXXXXX MP:%s"

this sends "MP: the subject line" to my alpha pager.

Jason Kohles -- System Administrator -- XMission Internet Access
robobob@xmission.com (at work) robobob@mindwell.com (at play)

Email to Fax

How do I setup HylaFAX as an email-to-fax gateway?

(An Email to Fax Gateway allows a user to send an email to a predefined email account which then processes and faxes out the document through a fax modem.)

See the HylaFAX Handbook's section on Email-To-Fax.

Which document types can I fax using HylaFAX's email-to-fax capability?

By default faxmail, HylaFAX's email-to-fax gateway application, supports plain text and Postscript attachments. Faxmail also includes the ability to use external processors for other document types. Please see the faxmail man page for more information.

Fax to Email

How do I setup HylaFAX as an fax-to-email gateway?

For a simple example see the faxrcvd man page.

Miscellaneous Stuff

Is there a way to integrate Asterisk and HylaFAX?

Your best option presently is to use Lee Howard's IAXmodem with Steve Underwood's spandsp library. For more information, see:

http://voip-info.org/tiki-index.php?page=Asterisk%20fax

See also a nice detailed howto here: http://www.the-asterisk-book.com/unstable/faxserver-mit-iaxmodem-und-hylafax.html

How can I fax Microsoft Office files?

One way to easily fax Windows files is by using a HylaFAX Windows client. Please see the Client Software page for a complete list of free and commercial clients.


How can I improve the resolution quality of incoming faxes?


This page was last edited on 2 November 2016, at 13:32.

Powered by MediaWiki
Attribution-ShareAlike 2.5

Project hosted by iFAX Solutions