[hylafax-users] tty for modem

[innsight innsight <innteract@xxxxxxxxx>]

Hi,

This is first time I'm trying to setup the server. When I had setup the hylafax I setup the hyalfax on ttyS0.

But when I do 

#dmesg | tail

pctel(477): pctel v0.1 loaded

pctel_pci(728): device 134d:7891 is grabbed by driver serial: try to release

ACPI: PCI interrupt for device 0000:01:04.0 disabled

PCI: Enabling device 0000:01:04.0 (0100 -> 0101)

ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 177

pctel_pci(233): PCTel device[0000:01:04.0](0x20) found 134d:7891 (rev 02), iobase=0xdf40, irq=177.

pctel_pci(609): Setup PCI port: port 0xdf40, irq 177, type 0, membase 00000000, ops 00000000

ttyS_PCTEL0 at I/O 0xdf40 (irq = 177) is a PCTel

From above output it seems the modem is on ttyS_PCTEL0 do I need to change any thing in config and if yes then where ?

Modem : conexant d850

version : hylafax 4.4

OS  : CentOS 5.5