[hylafax-users] error of receiving fax

[Lirees <lirees@xxxxxxxxx>]

hi everyone, 
about 90% of the fax that i receiving are broken, i tried to change my modem ma nothing to do, i have the same problem. 
can be a problem of the line ??... i had no problems before the last week, the error log are alway the same 

centos 5.5 whit hylafax 6.04

Dec 28 15:54:34.97: [29397]: SESSION BEGIN 000005538 390255302419
Dec 28 15:54:34.97: [29397]: HylaFAX (tm) Version 6.0.4
Dec 28 15:54:34.97: [29397]: DynamicConfig: bin/dynconf.php "/dev/ttyS2"
Dec 28 15:54:35.04: [29397]: <-- [13:AT+FCLASS=1A\r]
Dec 28 15:54:40.22: [29397]: --> [7:CONNECT]
Dec 28 15:54:40.22: [29397]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS2'
Dec 28 15:54:40.22: [29397]: RECV FAX: begin
Dec 28 15:54:40.22: [29397]: <-- data [32]
Dec 28 15:54:40.22: [29397]: <-- data [2]
Dec 28 15:54:40.39: [29397]: --> [7:CONNECT]
Dec 28 15:54:40.39: [29397]: <-- data [23]
Dec 28 15:54:40.39: [29397]: <-- data [2]
Dec 28 15:54:41.11: [29397]: --> [7:CONNECT]
Dec 28 15:54:41.11: [29397]: <-- data [13]
Dec 28 15:54:41.11: [29397]: <-- data [2]
Dec 28 15:54:43.37: [29397]: --> [2:OK]
Dec 28 15:54:43.37: [29397]: <-- [9:AT+FRH=3\r]
Dec 28 15:54:44.05: [29397]: --> [7:CONNECT]
Dec 28 15:54:45.46: [29397]: --> [2:OK]
Dec 28 15:54:45.46: [29397]: RECV recv TSI (sender id)
Dec 28 15:54:45.46: [29397]: REMOTE TSI "0342638815"
Dec 28 15:54:45.46: [29397]: <-- [9:AT+FRH=3\r]
Dec 28 15:54:45.47: [29397]: --> [7:CONNECT]
Dec 28 15:54:45.72: [29397]: --> [2:OK]
Dec 28 15:54:45.72: [29397]: RECV recv DCS (command signal)
Dec 28 15:54:45.72: [29397]: REMOTE wants 14400 bit/s
Dec 28 15:54:45.72: [29397]: REMOTE wants A4 page width (215 mm)
Dec 28 15:54:45.72: [29397]: REMOTE wants A4 page length (297 mm)
Dec 28 15:54:45.72: [29397]: REMOTE wants 3.85 line/mm
Dec 28 15:54:45.72: [29397]: REMOTE wants 2-D MMR
Dec 28 15:54:45.72: [29397]: REMOTE wants T.30 Annex A, 256-byte ECM
Dec 28 15:54:45.72: [29397]: RECV training at v.17 14400 bit/s
Dec 28 15:54:45.72: [29397]: <-- [11:AT+FRM=145\r]
Dec 28 15:54:47.43: [29397]: --> [7:CONNECT]
Dec 28 15:54:48.99: [29397]: RECV: TCF 2812 bytes, 1% non-zero, 2764 zero-run
Dec 28 15:54:49.00: [29397]: --> [10:NO CARRIER]
Dec 28 15:54:49.00: [29397]: DELAY 70 ms
Dec 28 15:54:49.07: [29397]: TRAINING succeeded
Dec 28 15:54:49.07: [29397]: <-- [9:AT+FTH=3\r]
Dec 28 15:54:49.26: [29397]: --> [7:CONNECT]
Dec 28 15:54:49.26: [29397]: <-- data [3]
Dec 28 15:54:49.26: [29397]: <-- data [2]
Dec 28 15:54:50.44: [29397]: --> [2:OK]
Dec 28 15:54:50.44: [29397]: <-- [11:AT+FRM=146\r]
Dec 28 15:54:51.30: [29397]: --> [7:CONNECT]
Dec 28 15:54:51.79: [29397]: RECV received frame number 0
Dec 28 15:54:51.93: [29397]: RECV received frame number 1
Dec 28 15:54:52.07: [29397]: RECV received frame number 2
Dec 28 15:54:52.20: [29397]: RECV received frame number 3
Dec 28 15:54:52.34: [29397]: RECV received frame number 4
Dec 28 15:54:52.48: [29397]: RECV received frame number 5
Dec 28 15:54:52.62: [29397]: RECV received frame number 6
Dec 28 15:54:52.76: [29397]: RECV received frame number 7
Dec 28 15:54:52.90: [29397]: RECV received frame number 8
Dec 28 15:54:53.11: [29397]: RECV received frame number 9
Dec 28 15:54:53.24: [29397]: RECV received frame number 10
Dec 28 15:54:53.38: [29397]: RECV received frame number 11
Dec 28 15:54:53.52: [29397]: RECV received frame number 12
Dec 28 15:54:53.66: [29397]: RECV received frame number 13
Dec 28 15:54:53.79: [29397]: RECV received frame number 14
Dec 28 15:54:53.93: [29397]: RECV received frame number 15
Dec 28 15:54:54.14: [29397]: RECV received frame number 16
Dec 28 15:54:54.27: [29397]: RECV received frame number 17
Dec 28 15:54:54.41: [29397]: RECV received frame number 18
Dec 28 15:54:54.41: [29397]: RECV frame FCS check failed
Dec 28 15:54:54.41: [29397]: HDLC frame not byte-oriented.  Trailing byte: 0x80
Dec 28 15:54:54.41: [29397]: HDLC frame not byte-oriented.  Trailing byte: 0
Dec 28 15:54:54.41: [29397]: RECV assumed RCP frame with block end
Dec 28 15:54:54.41: [29397]: --> [10:NO CARRIER]
Dec 28 15:54:54.41: [29397]: <-- [9:AT+FRH=3\r]
Dec 28 15:54:54.96: [29397]: --> [7:CONNECT]
Dec 28 15:54:58.52: [29397]: --> [5:ERROR]
Dec 28 15:54:58.52: [29397]: MODEM Command error
Dec 28 15:54:58.52: [29397]: FCS error
Dec 28 15:54:58.52: [29397]: DELAY 70 ms
Dec 28 15:54:58.59: [29397]: <-- [9:AT+FTH=3\r]
Dec 28 15:54:58.79: [29397]: --> [7:CONNECT]
Dec 28 15:54:58.79: [29397]: <-- data [3]
Dec 28 15:54:58.79: [29397]: <-- data [2]
Dec 28 15:54:59.96: [29397]: --> [2:OK]
Dec 28 15:54:59.96: [29397]: RECV send CRP (command repeat)
Dec 28 15:54:59.96: [29397]: <-- [9:AT+FRH=3\r]
Dec 28 15:55:02.56: [29397]: --> [7:CONNECT]
Dec 28 15:55:03.12: [29397]: --> [5:ERROR]
Dec 28 15:55:03.12: [29397]: MODEM Command error
Dec 28 15:55:03.12: [29397]: FCS error
Dec 28 15:55:03.12: [29397]: DELAY 70 ms
Dec 28 15:55:03.19: [29397]: <-- [9:AT+FTH=3\r]
Dec 28 15:55:03.38: [29397]: --> [7:CONNECT]
Dec 28 15:55:03.38: [29397]: <-- data [3]
Dec 28 15:55:03.38: [29397]: <-- data [2]
Dec 28 15:55:04.56: [29397]: --> [2:OK]
Dec 28 15:55:04.56: [29397]: RECV send CRP (command repeat)
Dec 28 15:55:04.56: [29397]: <-- [9:AT+FRH=3\r]
Dec 28 15:55:05.80: [29397]: --> [7:CONNECT]
Dec 28 15:55:07.54: [29397]: --> [5:ERROR]
Dec 28 15:55:07.54: [29397]: MODEM Command error
Dec 28 15:55:07.54: [29397]: FCS error
Dec 28 15:55:07.54: [29397]: DELAY 70 ms
Dec 28 15:55:07.61: [29397]: <-- [9:AT+FTH=3\r]
Dec 28 15:55:07.81: [29397]: --> [7:CONNECT]
Dec 28 15:55:07.81: [29397]: <-- data [3]
Dec 28 15:55:07.81: [29397]: <-- data [2]
Dec 28 15:55:08.98: [29397]: --> [2:OK]
Dec 28 15:55:08.98: [29397]: RECV send CRP (command repeat)
Dec 28 15:55:08.98: [29397]: <-- [9:AT+FRH=3\r]
Dec 28 15:55:11.53: [29397]: --> [7:CONNECT]
Dec 28 15:55:12.16: [29397]: --> [5:ERROR]
Dec 28 15:55:12.16: [29397]: MODEM Command error
Dec 28 15:55:12.16: [29397]: FCS error
Dec 28 15:55:12.16: [29397]: <-- [9:AT+FRH=3\r]
Dec 28 15:55:12.18: [29397]: --> [7:CONNECT]
Dec 28 15:55:22.18: [29397]: <-- data [1]
Dec 28 15:55:22.19: [29397]: --> [2:OK]
Dec 28 15:55:22.20: [29397]: RECV: 4608 bytes of data, 83 total lines
Dec 28 15:55:22.20: [29397]: RECV keeping unconfirmed page
Dec 28 15:55:22.20: [29397]: RECV FAX (000005538): from 0342638815, page 1 in 0:00:42, A4, 3.85 line/mm, 2-D MMR, 14400 bit/s
Dec 28 15:55:22.20: [29397]: RECV FAX (000005538): 
recvq/fax000005548.tif from 0342638815, route to <unspecified>, 1 
pages in 0:00:42
Dec 28 15:55:22.20: [29397]: RECV FAX: T.30 T2 timeout, expected signal not received
Dec 28 15:55:22.20: [29397]: DELAY 70 ms
Dec 28 15:55:22.27: [29397]: <-- [9:AT+FTH=3\r]
Dec 28 15:55:22.31: [29397]: --> [7:CONNECT]
Dec 28 15:55:22.31: [29397]: <-- data [3]
Dec 28 15:55:22.31: [29397]: <-- data [2]
Dec 28 15:55:23.48: [29397]: --> [2:OK]
Dec 28 15:55:23.48: [29397]: RECV FAX (000005538): session with 
0342638815 terminated abnormally: T.30 T2 timeout, expected signal not 
received
Dec 28 15:55:23.48: [29397]: RECV FAX: bin/faxrcvd.php 
"recvq/fax000005548.tif" "ttyS2" "000005538" "T.30 T2 timeout, expected 
signal not received"
Dec 28 15:55:23.48: [29397]: RECV FAX: end
Dec 28 15:55:23.48: [29397]: T.30 T2 timeout, expected signal not received
Dec 28 15:55:23.48: [29397]: SESSION END