[hylafax-users] Problem with sending faxes

["John Warren" <jwarren@xxxxxxx>]

I'm having a problem sending in that when
the fax machine answers my mainpine card starts the connection sequence
when it hears the fax machines answer tone then drops the call and reports
that it was a busy connection. I'm assuming since this happens on several
of the channels it's likely a total board failure or something in the config
file is not set correctly.

Anyone have any ideas? I running HylaFAX
version 4.4.2 built Wed Oct  3 20:36:27 EDT 2007 for i686-pc-linux-gnu.


Here is my config.ttyS file.

# $Id: lucent-mt-10,v 1.9 2007/05/11
15:17:11 aidan Exp $

#
# prototype config for MultiTech 5634-series
modems using
# the Lucent/Agere chipset supporting
V.34-Fax.
#

#
CountryCode:        
       1
AreaCode:        
       310
FAXNumber:        
       +1.310.642.1701-12
LongDistancePrefix:      
 1
InternationalPrefix:      
 011
DialStringRules:      
 etc/dialrules
ServerTracing:      
         1
SessionTracing:      
         11
RecvFileMode:        
       0600
LogFileMode:        
       0600
DeviceMode:        
       0600
RingsBeforeAnswer:      
 2
SpeakerVolume:      
         on
GettyArgs:        
       "-h %l dx_%s"
LocalIdentifier:      
 "HMS, Inc. - Pharmacy Services"
TagLineFont:        
       etc/lutRS18.pcf
TagLineFormat:      
         "From %%l|%c|Page
%%P of %%T"
MaxRecvPages:        
       100
ModemDialCmd: ATDT%s
#

ModemType:        
       Class1.0        #
use this to supply a hint
ModemRate:        
       57600        
       # must be at least as fast as the DCE-DCE
communication
ModemFlowControl:      
 rtscts            
   # many firmwares have broken software flow control
Class1EnableV34Cmd:      
 AT+F34=14,1,2        # 33600-2400
primary, 2400-1200 control
Class1TMConnectDelay:    
   400            
   # counteract quick CONNECT response
Class1HasRHConnectBug:    
   yes            
   # cope with +FRH=3 CONNECT errors
#
# Setups for the MainPine.
#
ModemRingResponse:     AT+FCLASS=8;H1
ModemRingsBeforeResponse: 2    
        # Allow for CallerID to pass
CallIDPattern:      
  "NMBR="          # Get the number
if sent
CallIDPattern:      
  "NAME="          # Get the name
if sent
CallIDPattern:      
  SHIELDED_DTMF    # Get the DTMF DID digits if sent
CallIDAnswerLength:    4  
             # We're only using the
last 4 digits
ModemAnswerCmd:      
 <delay:100>AT+FCLASS=1;A

            Pharmacy Services
            John Warren
            Network Operations Administrator
            100 Corporate Pointe, Suite 395
            Culver City, CA 90230

            direct: 1.310.237.7721
            p: 1.310-642.1700 x7721 | f:
1.310.642.1701 | c: 1.714.504.9101
            e: jwarren@xxxxxxx
            w: www.hms.com

Please
consider the environment before printing this email.
----------------------------------------------------------------------------------------

Please note that the information contained in this message is intended only for the use 
of the person or office to whom it is addressed, and may contain privileged and
confidential information protected from disclosure under the law, including the 
Health Insurance Portability and Accountability Act (HIPAA).  All recipients are hereby 
notified that any inadvertent or unauthorized receipt does not waive such privilege, and
that unauthorized dissemination, distribution or copying of this communication is 
strictly prohibited and may subject you to criminal or civil penalties.  If you have 
received this communication in error, please notify the sender by replying to the message
and delete the material from any computer.  HMS Holdings Corp., together with
its subsidiaries and affiliates hereby claim all applicable privileges related to this 
information.  Any views expressed in this message are those of the individual sender,
except where the sender specifies, and with authority, states them to be 
the views of the company.

----------------------------------------------------------------------------------------