[hylafax-users] debian sid, hylafax 6.0.4-5, avantfax 3.3.1

[fw114@xxxxxx]

hi @ all,

well where should i start...

i've installed all above and it works... so far so good.

but what dosnt't work is that incomming faxes doesn't get routet ...

so fax recived is but:

 Jun 1 06:16:44 samba3 FaxGetty[24388]: HELLO
Jun 1 06:16:44 samba3 FaxGetty[24386]: HELLO
Jun 1 06:16:44 samba3 HylaFAX[1102]: Listening to 127.0.0.1:4559
Jun 1 06:16:44 samba3 HylaFAX[1102]: HylaFAX INET Protocol Server: restarted.
Jun 1 06:17:01 samba3 /USR/SBIN/CRON[1120]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Jun 1 06:17:10 samba3 FaxGetty[24388]: --> [4:RING]
Jun 1 06:17:13 samba3 FaxGetty[24388]: --> [4:RING]
Jun 1 06:17:14 samba3 FaxGetty[24388]: --> [4:RING]
Jun 1 06:17:14 samba3 FaxGetty[24388]: DynamicConfig: bin/dynconf.php "/dev/ttyS0"
Jun 1 06:17:28 samba3 FaxGetty[24388]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Jun 1 06:18:02 samba3 FaxGetty[24388]: RECV FAX (000000001): from +++, page 1 in 0:00:33, INF, 3.85 line/mm, 1-D MH, 9600 bit/s
Jun 1 06:18:02 samba3 FaxGetty[24388]: RECV FAX (000000001): recvq/fax000000001.tif from +++, route to <unspecified>, 1 pages in 0:00:34
Jun 1 06:18:05 samba3 FaxGetty[24388]: RECV FAX: bin/faxrcvd.php "recvq/fax000000001.tif" "ttyS0" "000000001" ""
Jun 1 06:18:05 samba3 FaxGetty[24388]: <-- [5:ATH0\r]
Jun 1 06:18:10 samba3 FaxGetty[24388]: MODEM TIMEOUT: reading line from modem
Jun 1 06:18:10 samba3 FaxGetty[24388]: MODEM <Timeout>
Jun 1 06:18:10 samba3 FaxGetty[24388]: MODEM set DTR OFF
Jun 1 06:18:11 samba3 FaxGetty[24388]: MODEM set DTR OFF
Jun 1 06:18:11 samba3 FaxGetty[24388]: DELAY 75 ms
Jun 1 06:18:11 samba3 FaxGetty[24388]: MODEM set DTR ON
Jun 1 06:18:11 samba3 FaxGetty[24388]: DELAY 2600 ms
Jun 1 06:18:14 samba3 FaxGetty[24388]: MODEM set baud rate: 19200 baud, input flow RTS/CTS , output flow RTS/CTS
Jun 1 06:18:14 samba3 FaxGetty[24388]: DELAY 10 ms
Jun 1 06:18:14 samba3 FaxGetty[24388]: MODEM flush i/o
Jun 1 06:18:14 samba3 FaxGetty[24388]: <-- [4:ATZ\r]
Jun 1 06:18:15 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:15 samba3 FaxGetty[24388]: DELAY 3000 ms
Jun 1 06:18:18 samba3 FaxGetty[24388]: MODEM flush i/o
Jun 1 06:18:18 samba3 FaxGetty[24388]: <-- [7:ATS0=0\r]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [6:ATS0=0]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:18 samba3 FaxGetty[24388]: <-- [5:ATE0\r]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [4:ATE0]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:18 samba3 FaxGetty[24388]: <-- [5:ATV1\r]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:18 samba3 FaxGetty[24388]: <-- [7:ATQ0X4\r]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:18 samba3 FaxGetty[24388]: <-- [7:ATS8=2\r]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:18 samba3 FaxGetty[24388]: <-- [8:ATS7=60\r]
Jun 1 06:18:18 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:18 samba3 FaxGetty[24388]: <-- [12:AT&H1&I0&R2\r]
Jun 1 06:18:19 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:19 samba3 FaxGetty[24388]: <-- [11:ATS13=1&D2\r]
Jun 1 06:18:19 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:19 samba3 FaxGetty[24388]: <-- [6:AT&C1\r]
Jun 1 06:18:19 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:19 samba3 FaxGetty[24388]: <-- [12:AT+FCLASS=?\r]
Jun 1 06:18:19 samba3 FaxGetty[24388]: --> [7:0,1,2.0]
Jun 1 06:18:19 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:19 samba3 FaxGetty[24388]: <-- [14:AT+FCLASS=2.0\r]
Jun 1 06:18:19 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:19 samba3 FaxGetty[24388]: <-- [8:AT+FMI?\r]
Jun 1 06:18:19 samba3 FaxGetty[24388]: --> [21:U.S. Robotics 56K FAX]
Jun 1 06:18:20 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:20 samba3 FaxGetty[24388]: <-- [8:AT+FMM?\r]
Jun 1 06:18:20 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:20 samba3 FaxGetty[24388]: <-- [8:AT+FMR?\r]
Jun 1 06:18:20 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:20 samba3 FaxGetty[24388]: <-- [9:AT+FCC=?\r]
Jun 1 06:18:20 samba3 FaxGetty[24388]: --> [35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)]
Jun 1 06:18:20 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:20 samba3 FaxGetty[24388]: <-- [9:AT+FSP=?\r]
Jun 1 06:18:20 samba3 FaxGetty[24388]: --> [5:(0,1)]
Jun 1 06:18:21 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:21 samba3 FaxGetty[24388]: <-- [9:AT+FLO=2\r]
Jun 1 06:18:21 samba3 FaxGetty[24388]: --> [2:OK]
J un 1 06:18:21 samba3 FaxGetty[24388]: <-- [9:AT+FPP=0\r]
Jun 1 06:18:21 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:21 samba3 FaxGetty[24388]: <-- [9:AT+FBO=0\r]
Jun 1 06:18:21 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:21 samba3 FaxGetty[24388]: <-- [10:AT+FCT=30\r]
Jun 1 06:18:21 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:21 samba3 FaxGetty[24388]: <-- [15:AT+FNR=1,1,1,0\r]
Jun 1 06:18:21 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:21 samba3 FaxGetty[24388]: <-- [9:AT+FIE=0\r]
Jun 1 06:18:21 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:21 samba3 FaxGetty[24388]: <-- [9:AT+FBU=0\r]
Jun 1 06:18:22 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:22 samba3 FaxGetty[24388]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jun 1 06:18:22 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:22 samba3 FaxGetty[24388]: MODEM U.S. ROBOTICS 56K FAX /
Jun 1 06 :18:22 samba3 FaxGetty[24388]: <-- [5:ATM0\r]
Jun 1 06:18:22 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:22 samba3 FaxGetty[24388]: <-- [30:AT+FLI="My Fax"\r]
Jun 1 06:18:22 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:22 samba3 FaxGetty[24388]: <-- [9:AT+FCR=1\r]
Jun 1 06:18:22 samba3 FaxGetty[24388]: --> [2:OK]
Jun 1 06:18:22 samba3 FaxGetty[24388]: <-- [9:AT+FAA=1\r]
Jun 1 06:18:22 samba3 FaxGetty[24388]: --> [2:OK]

when i run :

(ttyS1 is not in use for the moment, working on this one also)

cd /var/spool/hylafax; for i in `ls recvq/*`; do bin/faxrcvd.php $i ttyS0; done

all faxes get sorted like i want, and i can handel all inbound with avantfax web interface...

but it does not work on fax inbound...

i'll always get the same google post that don't help me with finding a solution for me..

i'am working on this since 4 days know, i i don't see the error. can someone plz shade some light on this...

so you guys are my last hope!

regards

  

GRATIS für alle WEB.DE Nutzer: Die maxdome Movie-FLAT!   
Jetzt freischalten unter http://movieflat.web.de

____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*