 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] No carrier detected for outgoing faxes
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] No carrier detected for outgoing faxes
- From: Willy Offermans <Willy@xxxxxxxxxxxxxxxxxxx>
- Reply-to: Willy@xxxxxxxxxxxxxxxxxxx
- Date: Thu, 15 Apr 2010 16:23:20 +0200
Dear HylaFAX friends,
I have a problem with the outgoing faxes. Upon sending I receive the
following message:
No carrier detected {E002}
Although the other side of the line is a perfectly working faxing
machine. The incoming faxes are received without any problem. I'm
running HylaFAX 5.4.1 under FreeBSD 7.0 and I have recently upgraded
HylaFAX to 5.4.1 by compiling the source code myself (configure, make,
make install).
What could be the problem?
Included are the logs from an outgoing and incoming fax:
Outgoing fax:
Apr 14 10:41:50.79: [48920]: SESSION BEGIN 000025057 +31XXXXXXXXX
Apr 14 10:41:50.79: [48920]: HylaFAX (tm) Version 5.4.1
Apr 14 10:41:50.79: [48920]: SEND FAX: JOB 2678 DEST +31XXXXXXXXX COMMID 000025057 DEVICE '/dev/modem' FROM 'Willy Offermans <willy@localhost>' USER willy
Apr 14 10:41:50.80: [48920]: <-- [12:AT+FCLASS=1\r]
Apr 14 10:41:50.82: [48920]: --> [2:OK]
Apr 14 10:41:51.13: [48920]: DIAL +31XXXXXXXXX
Apr 14 10:41:51.13: [48920]: <-- [18:ATDT0+31XXXXXXXXX\r]
Apr 14 10:42:55.92: [48920]: --> [10:NO CARRIER]
Apr 14 10:42:55.96: [48920]: SEND FAILED: JOB 2678 DEST +31XXXXXXXXX ERR No carrier detected {E002}
Apr 14 10:42:56.96: [48920]: <-- [5:ATH0\r]
Apr 14 10:42:56.97: [48920]: --> [2:OK]
Apr 14 10:42:57.02: [48920]: SESSION END
incoming fax:
Apr 15 14:51:11.71: [35516: SESSION BEGIN 000025081 +31XXXXXXX
Apr 15 14:51:11.71: [35516]: HylaFAX (tm) Version 5.4.1
Apr 15 14:51:11.71: [35516]: <-- [4:ATA\r]
Apr 15 14:51:17.09: [35516]: --> [7:CONNECT]
Apr 15 14:51:17.09: [35516]: ANSWER: FAX CONNECTION DEVICE '/dev/modem'
Apr 15 14:51:17.09: [35516]: RECV FAX: begin
Apr 15 14:51:17.13: [35516]: <-- data [32]
Apr 15 14:51:17.13: [35516]: <-- data [2]
Apr 15 14:51:19.13: [35516]: --> [7:CONNECT]
Apr 15 14:51:19.13: [35516]: <-- data [23]
Apr 15 14:51:19.13: [35516]: <-- data [2]
Apr 15 14:51:19.95: [35516]: --> [7:CONNECT]
Apr 15 14:51:19.96: [35516]: <-- data [13]
Apr 15 14:51:19.96: [35516]: <-- data [2]
Apr 15 14:51:20.60: [35516]: --> [2:OK]
Apr 15 14:51:20.60: [35516]: <-- [9:AT+FRH=3\r]
Apr 15 14:51:21.14: [35516]: --> [7:CONNECT]
Apr 15 14:51:22.49: [35516]: --> [2:OK]
Apr 15 14:51:22.49: [35516]: RECV recv TSI (sender id)
Apr 15 14:51:22.49: [35516]: REMOTE TSI ""
Apr 15 14:51:22.49: [35516]: <-- [9:AT+FRH=3\r]
Apr 15 14:51:22.51: [35516]: --> [7:CONNECT]
Apr 15 14:51:23.02: [35516]: --> [2:OK]
Apr 15 14:51:23.02: [35516]: RECV recv DCS (command signal)
Apr 15 14:51:23.02: [35516]: REMOTE wants 14400 bit/s
Apr 15 14:51:23.02: [35516]: REMOTE wants A4 page width (215 mm)
Apr 15 14:51:23.02: [35516]: REMOTE wants unlimited page length
Apr 15 14:51:23.02: [35516]: REMOTE wants 3.85 line/mm
Apr 15 14:51:23.02: [35516]: REMOTE wants 2-D MMR
Apr 15 14:51:23.02: [35516]: REMOTE wants T.30 Annex A, 256-byte ECM
Apr 15 14:51:23.02: [35516]: RECV training at v.17 14400 bit/s
Apr 15 14:51:23.02: [35516]: <-- [11:AT+FRM=145\r]
Apr 15 14:51:24.72: [35516]: --> [7:CONNECT]
Apr 15 14:51:26.25: [35516]: RECV: TCF 2722 bytes, 0% non-zero, 2698 zero-run
Apr 15 14:51:26.26: [35516]: --> [10:NO CARRIER]
Apr 15 14:51:26.26: [35516]: <-- [9:AT+FRS=7\r]
Apr 15 14:51:26.38: [35516]: --> [2:OK]
Apr 15 14:51:26.38: [35516]: TRAINING succeeded
Apr 15 14:51:26.39: [35516]: <-- [9:AT+FTH=3\r]
Apr 15 14:51:26.44: [35516]: --> [7:CONNECT]
Apr 15 14:51:26.45: [35516]: <-- data [3]
Apr 15 14:51:26.46: [35516]: <-- data [2]
Apr 15 14:51:27.76: [35516]: --> [2:OK]
Apr 15 14:51:27.76: [35516]: <-- [11:AT+FRM=146\r]
Apr 15 14:51:28.56: [35516]: --> [7:CONNECT]
Apr 15 14:51:29.00: [35516]: RECV received frame number 0
Apr 15 14:51:29.14: [35516]: RECV received frame number 1
Apr 15 14:51:29.29: [35516]: RECV received frame number 2
Apr 15 14:51:29.44: [35516]: RECV received frame number 3
Apr 15 14:51:29.59: [35516]: RECV received frame number 4
Apr 15 14:51:29.74: [35516]: RECV received frame number 5
Apr 15 14:51:29.89: [35516]: RECV received frame number 6
Apr 15 14:51:30.04: [35516]: RECV received frame number 7
Apr 15 14:51:30.18: [35516]: RECV received frame number 8
Apr 15 14:51:30.33: [35516]: RECV received frame number 9
Apr 15 14:51:30.47: [35516]: RECV received frame number 10
Apr 15 14:51:30.62: [35516]: RECV received frame number 11
Apr 15 14:51:30.76: [35516]: RECV received frame number 12
Apr 15 14:51:30.92: [35516]: RECV received frame number 13
Apr 15 14:51:31.06: [35516]: RECV received frame number 14
Apr 15 14:51:31.20: [35516]: RECV received frame number 15
Apr 15 14:51:31.35: [35516]: RECV received frame number 16
Apr 15 14:51:31.50: [35516]: RECV received frame number 17
Apr 15 14:51:31.65: [35516]: RECV received frame number 18
Apr 15 14:51:31.87: [35516]: RECV received frame number 19
Apr 15 14:51:31.95: [35516]: RECV received frame number 20
Apr 15 14:51:32.16: [35516]: RECV received frame number 21
Apr 15 14:51:32.32: [35516]: RECV received frame number 22
Apr 15 14:51:32.47: [35516]: RECV received frame number 23
Apr 15 14:51:32.62: [35516]: RECV received frame number 24
Apr 15 14:51:32.76: [35516]: RECV received frame number 25
Apr 15 14:51:32.90: [35516]: RECV received frame number 26
Apr 15 14:51:33.04: [35516]: RECV received frame number 27
Apr 15 14:51:33.18: [35516]: RECV received frame number 28
Apr 15 14:51:33.33: [35516]: RECV received frame number 29
Apr 15 14:51:33.48: [35516]: RECV received frame number 30
Apr 15 14:51:33.62: [35516]: RECV received frame number 31
Apr 15 14:51:33.83: [35516]: RECV received frame number 32
Apr 15 14:51:33.98: [35516]: RECV received frame number 33
Apr 15 14:51:34.12: [35516]: RECV received frame number 34
Apr 15 14:51:34.27: [35516]: RECV received frame number 35
Apr 15 14:51:34.41: [35516]: RECV received frame number 36
Apr 15 14:51:34.55: [35516]: RECV received frame number 37
Apr 15 14:51:34.70: [35516]: RECV received frame number 38
Apr 15 14:51:34.84: [35516]: RECV received frame number 39
Apr 15 14:51:34.99: [35516]: RECV received frame number 40
Apr 15 14:51:35.06: [35516]: RECV received frame number 41
Apr 15 14:51:35.06: [35516]: RECV received RCP frame
Apr 15 14:51:35.10: [35516]: --> [10:NO CARRIER]
Apr 15 14:51:35.10: [35516]: <-- [9:AT+FRH=3\r]
Apr 15 14:51:35.43: [35516]: --> [7:CONNECT]
Apr 15 14:51:36.36: [35516]: --> [2:OK]
Apr 15 14:51:36.36: [35516]: RECV recv PPS (partial page signal)
Apr 15 14:51:36.36: [35516]: RECV recv EOP (no more pages or documents)
Apr 15 14:51:36.36: [35516]: RECV received 42 frames of block 1 of page 1
Apr 15 14:51:36.39: [35516]: RECV: 10607 bytes of data, 1178 total lines
Apr 15 14:51:36.39: [35516]: <-- [9:AT+FRS=7\r]
Apr 15 14:51:36.51: [35516]: --> [2:OK]
Apr 15 14:51:36.52: [35516]: RECV send MCF (message confirmation)
Apr 15 14:51:36.52: [35516]: <-- [9:AT+FTH=3\r]
Apr 15 14:51:36.56: [35516]: --> [7:CONNECT]
Apr 15 14:51:36.56: [35516]: <-- data [3]
Apr 15 14:51:36.56: [35516]: <-- data [2]
Apr 15 14:51:37.88: [35516]: --> [2:OK]
Apr 15 14:51:37.88: [35516]: <-- [9:AT+FRH=3\r]
Apr 15 14:51:38.39: [35516]: --> [7:CONNECT]
Apr 15 14:51:39.20: [35516]: --> [2:OK]
Apr 15 14:51:39.20: [35516]: RECV recv DCN (disconnect)
Apr 15 14:51:39.20: [35516]: RECV FAX (000025081): from , page 1 in 0:00:19, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
Apr 15 14:51:40.20: [35516]: RECV FAX (000025081): recvq/fax000021810.tif from , subaddress <unspecified>, 1 pages in 0:00:22
Apr 15 14:51:40.20: [35516]: RECV FAX: bin/faxrcvd 'recvq/fax000021810.tif' 'modem' '000025081' ''
Apr 15 14:51:40.20: [35516]: RECV FAX: end
Apr 15 14:51:40.20: [35516]: SESSION END
--
Met vriendelijke groeten,
With kind regards,
Mit freundlichen Gruessen,
Willy
*************************************
Powered by ....
(__)
\\\'',)
\/ \ ^
.\._/_)
www.FreeBSD.org
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] No carrier detected for outgoing faxes
- From: Siri Vias Khalsa
- Re: [hylafax-users] No carrier detected for outgoing faxes
- Prev by Date: Re: [hylafax-users] faxadduser
- Next by Date: [hylafax-users] COMREC invalid response received
- Previous by thread: Re: [hylafax-users] Faxrcvd and FaxDispatch routing based on MSN number
- Next by thread: Re: [hylafax-users] No carrier detected for outgoing faxes
- Index(es):
Project hosted by iFAX Solutions