Re: [hylafax-users] possible receive error

[shouldbe q931 <shouldbeq931@xxxxxxxxxxxxxx>]

To isolate this away from anything else I did a test of dialling out on one line, and straight back in on the other

 

-------------------------------------------------------------------------------------------------

 

Jul 06 21:32:56.29: [ 2377]: SESSION BEGIN 000000038 +4420********
Jul 06 21:32:56.29: [ 2377]: HylaFAX (tm) Version 5.2.9
Jul 06 21:32:56.29: [ 2377]: CallID: '5900' ''
Jul 06 21:32:56.29: [ 2377]: <-- [4:ATA\r]
Jul 06 21:33:25.27: [ 2377]: --> [5:+FCON]
Jul 06 21:33:25.27: [ 2377]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyds02'
Jul 06 21:33:25.27: [ 2377]: STATE CHANGE: ANSWERING -> RECEIVING
Jul 06 21:33:25.27: [ 2377]: RECV FAX: begin
Jul 06 21:33:25.27: [ 2377]: --> [26:+FTSI:Fax           ]
Jul 06 21:33:25.27: [ 2377]: REMOTE TSI "Fax"
Jul 06 21:33:25.27: [ 2377]: --> [22:+FDCS: 1,0,0,2,0,2,0,0]
Jul 06 21:33:25.27: [ 2377]: REMOTE wants 2400 bit/s
Jul 06 21:33:25.27: [ 2377]: REMOTE wants A4 page width (215 mm)
Jul 06 21:33:25.27: [ 2377]: REMOTE wants unlimited page length
Jul 06 21:33:25.27: [ 2377]: REMOTE wants 7.7 line/mm
Jul 06 21:33:25.27: [ 2377]: REMOTE wants 1-D MH
Jul 06 21:33:25.27: [ 2377]: REMOTE wants T.30 Annex A, 256-byte ECM
Jul 06 21:33:25.27: [ 2377]: --> [2:OK]
Jul 06 21:33:25.27: [ 2377]: <-- [7:AT+FDR\r]
Jul 06 21:33:25.27: [ 2377]: --> [5:+FCFR]
Jul 06 21:33:25.27: [ 2377]: --> [22:+FDCS: 1,0,0,2,0,2,0,0]
Jul 06 21:33:25.27: [ 2377]: REMOTE wants 2400 bit/s
Jul 06 21:33:25.27: [ 2377]: REMOTE wants A4 page width (215 mm)
Jul 06 21:33:25.27: [ 2377]: REMOTE wants unlimited page length
Jul 06 21:33:25.27: [ 2377]: REMOTE wants 7.7 line/mm
Jul 06 21:33:25.27: [ 2377]: REMOTE wants 1-D MH
Jul 06 21:33:25.27: [ 2377]: REMOTE wants T.30 Annex A, 256-byte ECM
Jul 06 21:33:25.27: [ 2377]: --> [7:CONNECT]
Jul 06 21:33:25.27: [ 2377]: RECV: begin page
Jul 06 21:33:25.27: [ 2377]: RECV: send trigger 021
Jul 06 21:33:25.27: [ 2377]: Copy quality checking performed by host
Jul 06 21:37:25.27: [ 2377]: MODEM TIMEOUT: reading from modem
Jul 06 21:37:25.27: [ 2377]: RECV: Missing EOL after 5 seconds {E050}
Jul 06 21:37:25.27: [ 2377]: REMOTE HANGUP: Missing EOL after 5 seconds (section 3.2/T.4) (code 91)
Jul 06 21:37:25.27: [ 2377]: RECV FAX (000000038): recvq/fax000000027.tif from Fax, subaddress <unspecified>, 0 pages in 0:04:00
Jul 06 21:37:25.27: [ 2377]: RECV FAX: Missing EOL after 5 seconds (section 3.2/T.4) {E251}
Jul 06 21:37:25.27: [ 2377]: <-- [6:AT+FK\r]
Jul 06 21:37:55.27: [ 2377]: MODEM TIMEOUT: reading line from modem
Jul 06 21:37:55.27: [ 2377]: MODEM <Timeout>
Jul 06 21:37:55.27: [ 2377]: RECV FAX (000000038): session with Loewy Fax terminated abnormally: Missing EOL after 5 seconds (section 3.2/T.4) {E251}
Jul 06 21:37:55.27: [ 2377]: RECV FAX: bin/faxrcvd 'recvq/fax000000027.tif' 'ttyds02' '000000038' 'Missing EOL after 5 seconds (section 3.2/T.4) {E251}' '5900' ''
Jul 06 21:37:55.29: [ 2377]: RECV FAX: end
Jul 06 21:37:55.29: [ 2377]: SESSION END

-------------------------------------------------------------------------------------------------

 

I feel as if I'm so close to having it working, but its just out of reach :-(