[hylafax-users] Failure to train remote modem at 2400 bps or minimum speed

[Or Shemtov <or@xxxxxxxxxxxxx>]

hi,

i seem to have hit a wall with my installation attempt.
this installation accepts incoming faxes, but when i try to send a fax i get this error

Failure to train remote modem at 2400 bps or minimum speed

what can i do to solve this?
is it related to this bug fix? and if so, how do i apply this?

 (log below)

Mar 01 17:41:37.40: [ 8233]: SESSION BEGIN 000000021 0577961591
Mar 01 17:41:37.40: [ 8233]: HylaFAX (tm) Version 4.4.3
Mar 01 17:41:37.40: [ 8233]: SEND FAX: JOB 9 DEST 0577961591 COMMID 000000021 DEVICE '/dev/ttyS0' FROM 'or <or@xxxxxxxxxxx>' USER or
Mar 01 17:41:37.40: [ 8233]: <-- [12:AT+FCLASS=1\r]
Mar 01 17:41:37.43: [ 8233]: --> [2:OK]
Mar 01 17:41:37.43: [ 8233]: DIAL 0577961591
Mar 01 17:41:37.43: [ 8233]: <-- [15:ATDT0577961591\r]
Mar 01 17:41:48.24: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:49.76: [ 8233]: --> [2:OK]
Mar 01 17:41:49.76: [ 8233]: REMOTE CSI "www.myfax.co.il"
Mar 01 17:41:49.76: [ 8233]: <-- [9:AT+FRH=3\r]
Mar 01 17:41:49.78: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:50.18: [ 8233]: --> [2:OK]
Mar 01 17:41:50.18: [ 8233]: REMOTE best rate 4800 bit/s
Mar 01 17:41:50.18: [ 8233]: REMOTE max A3 page width (303 mm)
Mar 01 17:41:50.18: [ 8233]: REMOTE max unlimited page length
Mar 01 17:41:50.18: [ 8233]: REMOTE best vres 15.4 line/mm
Mar 01 17:41:50.18: [ 8233]: REMOTE format support: MH, MR, MMR
Mar 01 17:41:50.18: [ 8233]: REMOTE supports T.30 Annex A, 256-byte ECM
Mar 01 17:41:50.18: [ 8233]: REMOTE best 0 ms/scanline
Mar 01 17:41:50.18: [ 8233]: USE 4800 bit/s
Mar 01 17:41:50.18: [ 8233]: USE error correction mode
Mar 01 17:41:50.18: [ 8233]: SEND file "docq/doc10.ps;c1"
Mar 01 17:41:50.18: [ 8233]: USE A4 page width (215 mm)
Mar 01 17:41:50.18: [ 8233]: USE unlimited page length
Mar 01 17:41:50.18: [ 8233]: USE 7.7 line/mm
Mar 01 17:41:50.18: [ 8233]: USE 2-D MMR
Mar 01 17:41:50.18: [ 8233]: USE 0 ms/scanline
Mar 01 17:41:50.18: [ 8233]: SEND training at v.27ter 4800 bit/s
Mar 01 17:41:50.18: [ 8233]: <-- [9:AT+FRS=7\r]
Mar 01 17:41:50.28: [ 8233]: --> [2:OK]
Mar 01 17:41:50.28: [ 8233]: <-- [9:AT+FTH=3\r]
Mar 01 17:41:50.31: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:50.31: [ 8233]: <-- data [23]
Mar 01 17:41:50.31: [ 8233]: <-- data [2]
Mar 01 17:41:52.17: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:52.17: [ 8233]: <-- data [7]
Mar 01 17:41:52.17: [ 8233]: <-- data [2]
Mar 01 17:41:52.60: [ 8233]: --> [2:OK]
Mar 01 17:41:52.60: [ 8233]: <-- [9:AT+FTS=7\r]
Mar 01 17:41:52.69: [ 8233]: --> [2:OK]
Mar 01 17:41:52.69: [ 8233]: <-- [10:AT+FTM=48\r]
Mar 01 17:41:52.71: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:52.71: [ 8233]: <-- data [900]
Mar 01 17:41:52.73: [ 8233]: <-- data [2]
Mar 01 17:41:53.87: [ 8233]: --> [2:OK]
Mar 01 17:41:53.87: [ 8233]: <-- [9:AT+FRH=3\r]
Mar 01 17:41:55.30: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:56.34: [ 8233]: --> [2:OK]
Mar 01 17:41:56.34: [ 8233]: SEND training at v.27ter fallback mode 2400 bit/s
Mar 01 17:41:56.34: [ 8233]: <-- [9:AT+FRS=7\r]
Mar 01 17:41:56.45: [ 8233]: --> [2:OK]
Mar 01 17:41:56.45: [ 8233]: <-- [9:AT+FTH=3\r]
Mar 01 17:41:56.47: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:56.47: [ 8233]: <-- data [23]
Mar 01 17:41:56.47: [ 8233]: <-- data [2]
Mar 01 17:41:58.29: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:58.29: [ 8233]: <-- data [7]
Mar 01 17:41:58.29: [ 8233]: <-- data [2]
Mar 01 17:41:58.72: [ 8233]: --> [2:OK]
Mar 01 17:41:58.72: [ 8233]: <-- [9:AT+FTS=7\r]
Mar 01 17:41:58.81: [ 8233]: --> [2:OK]
Mar 01 17:41:58.81: [ 8233]: <-- [10:AT+FTM=24\r]
Mar 01 17:41:58.83: [ 8233]: --> [7:CONNECT]
Mar 01 17:41:58.83: [ 8233]: <-- data [450]
Mar 01 17:41:58.84: [ 8233]: <-- data [2]
Mar 01 17:42:00.22: [ 8233]: --> [2:OK]
Mar 01 17:42:00.22: [ 8233]: <-- [9:AT+FRH=3\r]
Mar 01 17:42:01.72: [ 8233]: --> [7:CONNECT]
Mar 01 17:42:02.76: [ 8233]: --> [2:OK]
Mar 01 17:42:02.76: [ 8233]: TRAINING failed
Mar 01 17:42:02.76: [ 8233]: <-- [9:AT+FRS=7\r]
Mar 01 17:42:02.86: [ 8233]: --> [2:OK]
Mar 01 17:42:02.86: [ 8233]: <-- [9:AT+FTH=3\r]
Mar 01 17:42:02.89: [ 8233]: --> [7:CONNECT]
Mar 01 17:42:02.89: [ 8233]: <-- data [3]
Mar 01 17:42:02.89: [ 8233]: <-- data [2]
Mar 01 17:42:04.17: [ 8233]: --> [2:OK]
Mar 01 17:42:05.17: [ 8233]: <-- [5:ATH0\r]
Mar 01 17:42:05.29: [ 8233]: --> [2:OK]
Mar 01 17:42:05.29: [ 8233]: SESSION END



thanks,
or shmetov
aerocom israel ltd
www.aerocom.co.il