Re: [hylafax-users] Hylafax + Zyxel Omni 56K

[voznjuk konstantin <kvoznjuk@xxxxxxxxx>]

:) No! No any additional fax machine. I don't know why you think so, but I have Panas TDE 100 with DISA and just one modem on dedicated extension port of PBX. Test faxes I sent from nextdoor office through external ( city ) lines.

Ok. More that, after same experiments I change fax type to class2. In this case picture comletely diferrent - fax sent but not received :) (see log)

LOG 2
Fax not received.
   

Session log follows:
Feb 25 19:52:33.94: [16976]: SESSION BEGIN 000000051 380444955324
Feb 25 19:52:33.94: [16976]: HylaFAX (tm) Version 4.4.4
Feb 25 19:52:33.94: [16976]: <-- [4:ATA\r]
Feb 25 19:52:50.58: [16976]: --> [5:+FCON]
Feb 25 19:52:50.58: [16976]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyACM0'
Feb 25 19:52:50.58: [16976]: RECV FAX: begin
Feb 25 19:52:50.91: [16976]: --> [28:+FTSI:"         80444955320"]
Feb 25 19:52:50.91: [16976]: REMOTE TSI "80444955320"
Feb 25 19:52:50.91: [16976]: --> [8:+FDCS:0,]
Feb 25 19:52:50.91: [16976]: MODEM protocol botch, can not parse "0,"
Feb 25 19:52:50.91: [16976]: REMOTE HANGUP: COMREC error (code 72)
Feb 25 19:52:50.92: [16976]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Feb 25 19:52:50.92: [16976]: REMOTE wants 9600 bit/s
Feb 25 19:52:50.92: [16976]: REMOTE wants A4 page width (215 mm)
Feb 25 19:52:50.92: [16976]: REMOTE wants unlimited page length
Feb 25 19:52:50.92: [16976]: REMOTE wants 3.85 line/mm
Feb 25 19:52:50.92: [16976]: REMOTE wants 2-D MR
Feb 25 19:52:50.92: [16976]: --> [2:OK]
Feb 25 19:52:50.92: [16976]: <-- [7:AT+FDR\r]
Feb 25 19:52:54.16: [16976]: --> [5:+FCFR]
Feb 25 19:52:54.94: [16976]: --> [21:+FDCS:0,3,0,2,1,0,0,0]
Feb 25 19:52:54.94: [16976]: REMOTE wants 9600 bit/s
Feb 25 19:52:54.94: [16976]: REMOTE wants A4 page width (215 mm)
Feb 25 19:52:54.94: [16976]: REMOTE wants unlimited page length
Feb 25 19:52:54.94: [16976]: REMOTE wants 3.85 line/mm
Feb 25 19:52:54.94: [16976]: REMOTE wants 2-D MR
Feb 25 19:52:54.94: [16976]: --> [7:CONNECT]
Feb 25 19:52:54.94: [16976]: RECV: begin page
Feb 25 19:52:54.94: [16976]: RECV: send trigger 021
Feb 25 19:52:54.94: [16976]: <-- data [1]
Feb 25 19:52:54.94: [16976]: Copy quality checking performed by host
Feb 25 19:54:15.21: [16976]: <-- data [1]
Feb 25 19:54:15.21: [16976]: RECV: Missing EOL after 5 seconds
Feb 25 19:54:15.21: [16976]: REMOTE HANGUP: Missing EOL after 5 seconds (section
3.2/T.4) (code 91)
Feb 25 19:54:15.21: [16976]: RECV FAX (000000051): recvq/fax000000036.tif from
80444955320, route to <unspecified>, 0 pages in 1:25
Feb 25 19:54:15.21: [16976]: RECV FAX: 
Feb 25 19:54:15.21: [16976]: <-- [6:AT+FK\r]
Feb 25 19:54:45.21: [16976]: MODEM <Timeout>
Feb 25 19:54:45.21: [16976]: RECV FAX: bin/faxrcvd "recvq/fax000000036.tif"
"ttyACM0" "000000051" ""
Feb 25 19:54:45.21: [16976]: RECV FAX: end
Feb 25 19:54:45.21: [16976]: SESSION END

 

Best regards,
Konstantin

24.02.09, 16:45, "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>:


LOG 1
> voznjuk konstantin wrote:
> > Feb 23 16:42:40.63: [16976]: SESSION BEGIN 000000048 380444955324
> > Feb 23 16:42:40.63: [16976]: HylaFAX (tm) Version 4.4.4
> > Feb 23 16:42:40.63: [16976]: <-- [4:ATA\r]
> > Feb 23 16:42:47.30: [16976]: --> [7:CONNECT]
> > Feb 23 16:42:47.30: [16976]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyACM0'
> > Feb 23 16:42:47.30: [16976]: RECV FAX: begin
> > Feb 23 16:42:47.30: [16976]: <-- data [32]
> > Feb 23 16:42:47.30: [16976]: <-- data [2]
> > Feb 23 16:42:48.52: [16976]: --> [7:CONNECT]
> > Feb 23 16:42:48.52: [16976]: <-- data [23]
> > Feb 23 16:42:48.52: [16976]: <-- data [2]
> > Feb 23 16:42:49.52: [16976]: --> [7:CONNECT]
> > Feb 23 16:42:49.52: [16976]: <-- data [13]
> > Feb 23 16:42:49.52: [16976]: <-- data [2]
> > Feb 23 16:42:50.02: [16976]: --> [2:OK]
> > Feb 23 16:42:50.02: [16976]: <-- [9:AT+FRH=3\r]
> > Feb 23 16:42:50.31: [16976]: --> [7:CONNECT]
> > Feb 23 16:42:52.53: [16976]: --> [2:OK]
> > Feb 23 16:42:52.53: [16976]: RECV recv DIS (identification signal)
> >   
> You have another fax machine connected to the same phone line that is 
> answering the calls.  Turn that machine off.
> Thanks,
> Lee.
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

-- 
Яндекс.Открытки. Свежие открытки у вас в почтовом ящике http://cards.yandex.ru/subscribe.xml


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*