[hylafax-users] RECV FAX: No sender protocol (T.30 T1 timeout)

[Ismir Saljic <isaljic@xxxxxxxxx>]

Hello,

I'm using hylafax 4.4.4 with avantfax and USR modems.I am also using USB hub dlink.Operating system iz Centos 5.Percentage of received faxes is about 50%.
Most common problem during receiving faxes is "RECV FAX: No sender protocol (T.30 T1 timeout)".
Is there anyone who can help me.

P.S.Sorry for bad english..

Thanks.

Ismir

Jan 23 12:18:38.32: [ 4573]: SESSION BEGIN 
Jan 23 12:18:38.32: [ 4573]: HylaFAX (tm) Version 4.4.4
Jan 23 12:18:38.32: [ 4573]: CallID: "XXXXXX" "XXXXXX"
Jan 23 12:18:38.32: [ 4573]: DynamicConfig: bin/dynconf.php "/dev/ttyACM1" "XXXX" "XXXXXX"
Jan 23 12:18:38.40: [ 4573]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Jan 23 12:18:38.40: [ 4573]: <-- [4:ATA\r]
Jan 23 12:18:38.55: [ 4573]: --> [4:RING]
Jan 23 12:18:44.43: [ 4573]: --> [7:CONNECT]
Jan 23 12:18:44.43: [ 4573]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyACM1'
Jan 23 12:18:44.43: [ 4573]: RECV FAX: begin
Jan 23 12:18:44.43: [ 4573]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C>
Jan 23 12:18:44.43: [ 4573]: <-- data [32]
Jan 23 12:18:44.43: [ 4573]: <-- data [2]
Jan 23 12:18:44.43: [ 4573]: --> [7:CONNECT]
Jan 23 12:18:44.43: [ 4573]: <-- HDLC<23:FF C0 02 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jan 23 12:18:44.43: [ 4573]: <-- data [23]
Jan 23 12:18:44.43: [ 4573]: <-- data [2]
Jan 23 12:18:44.43: [ 4573]: --> [7:CONNECT]
Jan 23 12:18:44.43: [ 4573]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
Jan 23 12:18:44.43: [ 4573]: <-- data [13]
Jan 23 12:18:44.43: [ 4573]: <-- data [2]
Jan 23 12:18:46.66: [ 4573]: --> [2:OK]
Jan 23 12:18:46.66: [ 4573]: <-- [9:AT+FRH=3\r]
Jan 23 12:18:53.66: [ 4573]: --> [0:]
Jan 23 12:18:53.66: [ 4573]: MODEM <Empty line>
Jan 23 12:18:53.66: [ 4573]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 23 12:18:53.66: [ 4573]: <-- data [1]
Jan 23 12:18:53.66: [ 4573]: --> [2:]
Jan 23 12:18:53.66: [ 4573]: --> [2:OK]
Jan 23 12:18:53.66: [ 4573]: <-- [9:AT+FRS=7\r]
Jan 23 12:18:53.76: [ 4573]: --> [2:OK]
Jan 23 12:18:53.76: [ 4573]: <-- [9:AT+FTH=3\r]
Jan 23 12:18:54.56: [ 4573]: --> [7:CONNECT]
Jan 23 12:18:54.56: [ 4573]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C>
Jan 23 12:18:54.56: [ 4573]: <-- data [32]
Jan 23 12:18:54.56: [ 4573]: <-- data [2]
Jan 23 12:18:54.56: [ 4573]: --> [7:CONNECT]
Jan 23 12:18:54.56: [ 4573]: <-- HDLC<23:FF C0 02 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jan 23 12:18:54.56: [ 4573]: <-- data [23]
Jan 23 12:18:54.56: [ 4573]: <-- data [2]
Jan 23 12:18:54.56: [ 4573]: --> [7:CONNECT]
Jan 23 12:18:54.56: [ 4573]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
Jan 23 12:18:54.56: [ 4573]: <-- data [13]
Jan 23 12:18:54.56: [ 4573]: <-- data [2]
Jan 23 12:18:56.79: [ 4573]: --> [2:OK]
Jan 23 12:18:56.79: [ 4573]: <-- [9:AT+FRH=3\r]
Jan 23 12:19:03.79: [ 4573]: --> [0:]
Jan 23 12:19:03.79: [ 4573]: MODEM <Empty line>
Jan 23 12:19:03.79: [ 4573]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 23 12:19:03.79: [ 4573]: <-- data [1]
Jan 23 12:19:03.79: [ 4573]: --> [2:]
Jan 23 12:19:03.79: [ 4573]: --> [2:OK]
Jan 23 12:19:03.79: [ 4573]: <-- [9:AT+FRS=7\r]
Jan 23 12:19:03.89: [ 4573]: --> [2:OK]
Jan 23 12:19:03.89: [ 4573]: <-- [9:AT+FTH=3\r]
Jan 23 12:19:04.70: [ 4573]: --> [7:CONNECT]
Jan 23 12:19:04.70: [ 4573]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C>
Jan 23 12:19:04.70: [ 4573]: <-- data [32]
Jan 23 12:19:04.70: [ 4573]: <-- data [2]
Jan 23 12:19:04.70: [ 4573]: --> [7:CONNECT]
Jan 23 12:19:04.70: [ 4573]: <-- HDLC<23:FF C0 02 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jan 23 12:19:04.70: [ 4573]: <-- data [23]
Jan 23 12:19:04.70: [ 4573]: <-- data [2]
Jan 23 12:19:04.70: [ 4573]: --> [7:CONNECT]
Jan 23 12:19:04.70: [ 4573]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
Jan 23 12:19:04.70: [ 4573]: <-- data [13]
Jan 23 12:19:04.70: [ 4573]: <-- data [2]
Jan 23 12:19:06.93: [ 4573]: --> [2:OK]
Jan 23 12:19:06.93: [ 4573]: <-- [9:AT+FRH=3\r]
Jan 23 12:19:13.93: [ 4573]: --> [0:]
Jan 23 12:19:13.93: [ 4573]: MODEM <Empty line>
Jan 23 12:19:13.93: [ 4573]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 23 12:19:13.93: [ 4573]: <-- data [1]
Jan 23 12:19:13.93: [ 4573]: --> [2:]
Jan 23 12:19:13.93: [ 4573]: --> [2:OK]
Jan 23 12:19:13.93: [ 4573]: <-- [9:AT+FRS=7\r]
Jan 23 12:19:14.03: [ 4573]: --> [2:OK]
Jan 23 12:19:14.03: [ 4573]: <-- [9:AT+FTH=3\r]
Jan 23 12:19:14.83: [ 4573]: --> [7:CONNECT]
Jan 23 12:19:14.83: [ 4573]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C>
Jan 23 12:19:14.83: [ 4573]: <-- data [32]
Jan 23 12:19:14.83: [ 4573]: <-- data [2]
Jan 23 12:19:14.83: [ 4573]: --> [7:CONNECT]
Jan 23 12:19:14.83: [ 4573]: <-- HDLC<23:FF C0 02 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jan 23 12:19:14.83: [ 4573]: <-- data [23]
Jan 23 12:19:14.83: [ 4573]: <-- data [2]
Jan 23 12:19:14.83: [ 4573]: --> [7:CONNECT]
Jan 23 12:19:14.83: [ 4573]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
Jan 23 12:19:14.83: [ 4573]: <-- data [13]
Jan 23 12:19:14.83: [ 4573]: <-- data [2]
Jan 23 12:19:17.06: [ 4573]: --> [2:OK]
Jan 23 12:19:17.06: [ 4573]: <-- [9:AT+FRH=3\r]
Jan 23 12:19:24.06: [ 4573]: --> [0:]
Jan 23 12:19:24.06: [ 4573]: MODEM <Empty line>
Jan 23 12:19:24.06: [ 4573]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 23 12:19:24.06: [ 4573]: <-- data [1]
Jan 23 12:19:24.06: [ 4573]: --> [2:]
Jan 23 12:19:24.06: [ 4573]: --> [2:OK]
Jan 23 12:19:24.06: [ 4573]: RECV FAX: No sender protocol (T.30 T1 timeout)
Jan 23 12:19:24.06: [ 4573]: RECV FAX: end
Jan 23 12:19:24.06: [ 4573]: No sender protocol (T.30 T1 timeout)
Jan 23 12:19:24.06: [ 4573]: SESSION END



DialStringRules:    etc/dialrules
ServerTracing:        2
SessionTracing:        127
RecvFileMode:        0600
LogFileMode:        0600
DeviceMode:        0600
RingsBeforeAnswer:    3
SpeakerVolume:        off
GettyArgs:        "-h %l dx_%s"
LocalIdentifier:    " "
TagLineFont:        etc/lutRS18.pcf
#TagLineFormat:        "From %%l|%c|Page %%P of %%T"
TagLineFormat:        "%c|Page %%P of %%T"
MaxRecvPages:        25
FaxRcvdCmd:        bin/faxrcvd.php
NotifyCmd:        bin/notify.php
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:        Class1        # use class 1 interface
ModemRate:        9600        # rate for DCE-DTE communication
ModemFlowControl:    xonxoff        # software flow control

#ModemFlowControl:    rtscts
#ModemGroupS1:           "any:.*"
ModemPriority:        11

#
##ModemSetupDTRCmd:    ATS13=1&D2    # setup so DTR drop resets modem
##ModemSetupDCDCmd:    AT&C1        # setup so DCD reflects carrier (or not)
##ModemNoFlowCmd:        AT&H0&I0&R1    # setup modem for no flow control
##ModemHardFlowCmd:    AT&H1&I0&R2    # setup modem for hardware flow control
##ModemSoftFlowCmd:    AT&H2&I2&R1    # setup modem for software flow control
##ModemResultCodesCmd:    ATQ0X4        # enable result codes
#
###ModemMfrQueryCmd:    !USR
##ModemModelQueryCmd:    ATI3
##ModemRevQueryCmd:    ATI7        # XXX returns a multi-line result
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
####Class1NFLOCmd:        AT&H0&I0&R1    # setup modem for no flow control
####Class1HFLOCmd:        AT&H1&I0&R2    # setup modem for hardware flow control
####Class1SFLOCmd:        ""        # modem does this automatically
#
# This should resolve "DIS/DTC received 3 times" errors:
#
Class1ResponseWaitCmd:    AT+FRS=1    # wait after sending TCF for response
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
###ModemSetupAACmd:    AT+FCLASS=0    # leave modem idling in class 0
###ModemAnswerCmd:        AT+FCLASS=1A    # answer in Class 1
#
# When using AT+FRS=n we see USR modems reset themselves in the middle of sessions
# this is not good.  So, we seem to work-around that problem by not using the
# command.  Unfortunately, this isn't an ideal thing.
#
#Class1SwitchingCmd:    "<delay\0727>"

Class1Cmd:        AT+FCLASS=1    # command to enter class 1
Class1PPMWaitCmd:    AT+FTS=7    # command to stop and wait before PPM
Class1TCFWaitCmd:    AT+FTS=7    # command to stop and wait before TCF
Class1EOPWaitCmd:    AT+FTS=9    # command to stop and wait before EOP
Class1SwitchingCmd:    AT+FRS=7    # silence between HDLC recv and trans
Class1RecvAbortOK:    200        # wait 200ms for abort response
Class1FrameOverhead:    4        # 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer:    40000        # 35+5secs waiting for ident frames
Class1TCFMaxNonZero:    10        # max 10% of data may be non-zero
Class1TCFMinRun:    1000        # min run is 2/3rds of TCF duration



#
## 
#
ModemResetCmds:         AT+VCID=1 
CallIDPattern:                "NMBR="
CallIDPattern:                "NAME="