Re: [hylafax-users] Need modem to use on Fedora Core 9 and Hylafax 4.4.4

[Enrique Arredondo <henry@xxxxxxxxxx>]

sure, here's the part that I have to change so they work: (it's 
basically commenting out some AT &H..... commands


# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use class 1 interface
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       RTSCTS          # software flow control
#
ModemSetupDTRCmd:       ATS13=1&D2      # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier 
(or not)
#ModemNoFlowCmd:                AT&H0&I0&R1     # setup modem for no 
flow control
#ModemHardFlowCmd:      AT&H1&I0&R2     # setup modem for hardware flow 
control
#ModemSoftFlowCmd:      AT&H2&I2&R1     # setup modem for software flow 
control
#ModemResultCodesCmd:   ATQ0X4          # enable result codes
#
#ModemMfrQueryCmd:      !USR
ModemModelQueryCmd:     ATI3
ModemRevQueryCmd:       ATI7            # XXX returns a multi-line result
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
#Class1NFLOCmd:         AT&H0&I0&R1     # setup modem for no flow control
#Class1HFLOCmd:         AT&H1&I0&R2     # setup modem for hardware flow 
control
#Class1SFLOCmd:         ""              # modem does this automatically
#
# This should resolve "DIS/DTC received 3 times" errors:
#
Class1ResponseWaitCmd:  AT+FRS=1        # wait after sending TCF for 
response
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
ModemSetupAACmd:        AT+FCLASS=0     # leave modem idling in class 0
ModemAnswerCmd:         AT+FCLASS=1A    # answer in Class 1
#
# When using AT+FRS=n we see USR modems reset themselves in the middle 
of sessions
# this is not good.  So, we seem to work-around that problem by not 
using the
# command.  Unfortunately, this isn't an ideal thing.
#
Class1SwitchingCmd:     "<delay\0727>"


longbow wrote:
> hi enrique!
>
> could you please post your config for the modem? i am searching for a
> working config for usr modems...
>
> thx
> wolfgang
>
> Enrique Arredondo wrote:
>   
> > I'm using this one :
> > http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3718719&CatId=564
> >
> >
> > I have 4 of them
> >
> >
> >
> > Ramon F. McDougall wrote:
> >     
> > > Greetings to All,
> > >
> > >  
> > >
> > > Can anyone let me know what modem can use with my Fedora Core 9 and
> > > Hylafax 4.4.4. I purchased
> > >
> > > ZoomFaxModem 2920 but is not being picked up by my system. Thanking
> > > you in advance.
> > >
> > >  
> > >
> > >  
> > >
> > > Kind Regards,
> > >
> > >  
> > >
> > >  
> > >
> > > R@m0ne
> > >
> > >  
> > >
> > >  
> > >
> > >       
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> >  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >     
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
>   


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*