Re: [hylafax-users] I need help configuring my fax modem.

["Siri Vias Khalsa" <sirivias.khalsa@xxxxxxxxxx>]

>EfaxServ:/proc# setserial -a /dev/ttyS2

>/dev/ttyS2, Line 2, UART: 16450, Port: 0xe808, IRQ: 169
>       Baud_base: 115200, close_delay: 50, divisor: 0
>      closing_wait: 3000
>      Flags: spd_normal skip_test

> 

>EfaxServ:/proc# setserial -a /dev/ttyS3
>/dev/ttyS3, Line 3, UART: 8250, Port: 0xe810, IRQ: 169
>        Baud_base: 115200, close_delay: 50, divisor: 0
>        closing_wait: 3000
>        Flags: spd_normal skip_test

> 

>What can I do to configure my fax modems?

>John

 

One note – ttyS0 and ttyS1 appear to be the serial ports on the motherboard (irq3 and irq4)

 

ttyS2 and ttyS3 are going to be your internal PCI cards

 

-Siri Vias