HylaFAX The world's most advanced open source fax server |
Hello folks, I’m hoping someone can point me in the right direction
in my search for a solution. I have a particular fax destination that
indicates the faxes they are receiving (which were sent from our Hylafax
server) are incomplete or cut off mid page. I’m not receiving
errors indicating there was a failure, but the logs indicate we’ve been
getting partial page signals. Is this indicative of a noisy line, a bad
modem configuration or a problematic destination fax machine? Any good
methods for narrowing this down and resolving? Thanks in advance! -Stott From xferfaxlog: 08/11/08 21:46 SEND 000025660 ttyS4 25995 "" faxadmin@xxxxxxxxxxxx "207784****" "207784****" 2220072 1 0:41 0:25 "" "" "" "" "faxuser" "00
44 1F 22" From the specific jobs log file: Aug 11 21:46:10.57: [ 8233]: SESSION BEGIN 000025660
1207207784**** Aug 11 21:46:10.57: [ 8233]: HylaFAX (tm) Version 4.2.5 Aug 11 21:46:10.57: [ 8233]: SEND FAX: JOB 25995 DEST
207784**** COMMID 000025660 DEVICE '/dev/ttyS4' FROM 'BlueTarp Financial, Inc.
<faxadmin@xxxxxxxxxxxx>' USER faxuser Aug 11 21:46:10.57: [ 8233]: <-- [12:AT+FCLASS=1\r] Aug 11 21:46:10.60: [ 8233]: --> [2:OK] Aug 11 21:46:10.60: [ 8233]: DIAL 207784**** Aug 11 21:46:10.60: [ 8233]: <-- [16:ATDT1207784****\r] Aug 11 21:46:26.49: [ 8233]: --> [7:CONNECT] Aug 11 21:46:27.95: [ 8233]: --> [2:OK] Aug 11 21:46:27.95: [ 8233]: REMOTE NSF "00 00 56 55 55
00 8C 90 80 EF 00" Aug 11 21:46:27.95: [ 8233]: NSF remote fax equipment:
Brother MFC-3100C/MFC-8600 Aug 11 21:46:27.95: [ 8233]: <-- [9:AT+FRH=3\r] Aug 11 21:46:27.98: [ 8233]: --> [7:CONNECT] Aug 11 21:46:28.66: [ 8233]: --> [2:OK] Aug 11 21:46:28.66: [ 8233]: REMOTE CSI
"207784****" Aug 11 21:46:28.66: [ 8233]: <-- [9:AT+FRH=3\r] Aug 11 21:46:28.69: [ 8233]: --> [7:CONNECT] Aug 11 21:46:28.98: [ 8233]: --> [2:OK] Aug 11 21:46:28.98: [ 8233]: REMOTE best rate 14400 bit/s Aug 11 21:46:28.98: [ 8233]: REMOTE max A4 page width (215
mm) Aug 11 21:46:28.98: [ 8233]: REMOTE max unlimited page
length Aug 11 21:46:28.98: [ 8233]: REMOTE best vres 15.4 line/mm Aug 11 21:46:28.98: [ 8233]: REMOTE format support: MH, MR,
MMR Aug 11 21:46:28.98: [ 8233]: REMOTE supports T.30 Annex A,
256-byte ECM Aug 11 21:46:28.98: [ 8233]: REMOTE best 10 ms/scanline Aug 11 21:46:28.98: [ 8233]: USE 14400 bit/s Aug 11 21:46:28.98: [ 8233]: USE error correction mode Aug 11 21:46:28.98: [ 8233]: SEND file
"docq/doc34110.ps;f0" Aug 11 21:46:28.98: [ 8233]: USE A4 page width (215 mm) Aug 11 21:46:28.98: [ 8233]: USE unlimited page length Aug 11 21:46:28.98: [ 8233]: USE 3.85 line/mm Aug 11 21:46:28.98: [ 8233]: USE 2-D MMR Aug 11 21:46:28.98: [ 8233]: USE 0 ms/scanline Aug 11 21:46:28.98: [ 8233]: SEND training at v.17 14400
bit/s Aug 11 21:46:28.98: [ 8233]: <-- [9:AT+FRS=7\r] Aug 11 21:46:29.13: [ 8233]: --> [2:OK] Aug 11 21:46:29.13: [ 8233]: <-- [9:AT+FTH=3\r] Aug 11 21:46:30.01: [ 8233]: --> [7:CONNECT] Aug 11 21:46:30.01: [ 8233]: <-- data [23] Aug 11 21:46:30.01: [ 8233]: <-- data [2] Aug 11 21:46:30.04: [ 8233]: --> [7:CONNECT] Aug 11 21:46:30.04: [ 8233]: <-- data [7] Aug 11 21:46:30.04: [ 8233]: <-- data [2] Aug 11 21:46:31.17: [ 8233]: --> [2:OK] Aug 11 21:46:31.17: [ 8233]: <-- [9:AT+FTS=7\r] Aug 11 21:46:31.25: [ 8233]: --> [2:OK] Aug 11 21:46:31.25: [ 8233]: <-- [11:AT+FTM=145\r] Aug 11 21:46:31.28: [ 8233]: --> [7:CONNECT] Aug 11 21:46:31.28: [ 8233]: DELAY 400 ms Aug 11 21:46:31.68: [ 8233]: <-- data [1024] Aug 11 21:46:31.68: [ 8233]: <-- data [1024] Aug 11 21:46:31.68: [ 8233]: <-- data [652] Aug 11 21:46:31.68: [ 8233]: <-- data [2] Aug 11 21:46:34.41: [ 8233]: --> [2:OK] Aug 11 21:46:34.41: [ 8233]: <-- [9:AT+FRH=3\r] Aug 11 21:46:34.70: [ 8233]: --> [7:CONNECT] Aug 11 21:46:35.87: [ 8233]: --> [2:OK] Aug 11 21:46:35.87: [ 8233]: TRAINING succeeded Aug 11 21:46:35.87: [ 8233]: SEND begin page Aug 11 21:46:35.88: [ 8233]: SEND EOFB Aug 11 21:46:35.88: [ 8233]: SEND send frame number 0 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 1 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 2 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 3 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 4 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 5 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 6 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 7 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 8 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 9 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 10 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 11 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 12 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 13 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 14 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 15 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 16 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 17 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 18 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 19 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 20 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 21 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 22 Aug 11 21:46:35.88: [ 8233]: SEND send frame number 23 Aug 11 21:46:35.88: [ 8233]: DELAY 200 ms Aug 11 21:46:36.08: [ 8233]: <-- [11:AT+FTM=146\r] Aug 11 21:46:36.11: [ 8233]: --> [7:CONNECT] Aug 11 21:46:36.11: [ 8233]: DELAY 400 ms Aug 11 21:46:36.51: [ 8233]: <-- data [1038] Aug 11 21:46:36.51: [ 8233]: <-- data [1045] Aug 11 21:46:36.51: [ 8233]: <-- data [1043] Aug 11 21:46:36.51: [ 8233]: <-- data [1038] Aug 11 21:46:38.51: [ 8233]: <-- data [1043] Aug 11 21:46:38.51: [ 8233]: <-- data [1039] Aug 11 21:46:38.51: [ 8233]: <-- data [667] Aug 11 21:46:38.51: [ 8233]: <-- data [2] Aug 11 21:46:40.34: [ 8233]: --> [2:OK] Aug 11 21:46:40.34: [ 8233]: <-- [9:AT+FTS=9\r] Aug 11 21:46:40.44: [ 8233]: --> [2:OK] Aug 11 21:46:40.44: [ 8233]: <-- [9:AT+FTH=3\r] Aug 11 21:46:41.32: [ 8233]: --> [7:CONNECT] Aug 11 21:46:41.32: [ 8233]: <-- data [7] Aug 11 21:46:41.32: [ 8233]: <-- data [2] Aug 11 21:46:41.78: [ 8233]: --> [2:OK] Aug 11 21:46:41.78: [ 8233]: SEND send PPS (partial page
signal) Aug 11 21:46:41.78: [ 8233]: SEND send EOP (no more pages or
documents) Aug 11 21:46:41.78: [ 8233]: <-- [9:AT+FRH=3\r] Aug 11 21:46:41.94: [ 8233]: --> [7:CONNECT] Aug 11 21:46:44.13: [ 8233]: --> [2:OK] Aug 11 21:46:44.13: [ 8233]: SEND recv PPR (partial page
request) Aug 11 21:46:44.13: [ 8233]: <-- [9:AT+FRS=7\r] Aug 11 21:46:44.26: [ 8233]: --> [2:OK] Aug 11 21:46:44.26: [ 8233]: SEND send frame number 13 Aug 11 21:46:44.26: [ 8233]: SEND send frame number 13 Aug 11 21:46:44.26: [ 8233]: DELAY 200 ms Aug 11 21:46:44.47: [ 8233]: <-- [11:AT+FTM=146\r] Aug 11 21:46:44.50: [ 8233]: --> [7:CONNECT] Aug 11 21:46:44.50: [ 8233]: DELAY 400 ms Aug 11 21:46:44.90: [ 8233]: <-- data [921] Aug 11 21:46:44.90: [ 8233]: <-- data [2] Aug 11 21:46:45.45: [ 8233]: --> [2:OK] Aug 11 21:46:45.45: [ 8233]: <-- [9:AT+FTS=9\r] Aug 11 21:46:45.55: [ 8233]: --> [2:OK] Aug 11 21:46:45.55: [ 8233]: <-- [9:AT+FTH=3\r] Aug 11 21:46:46.42: [ 8233]: --> [7:CONNECT] Aug 11 21:46:46.42: [ 8233]: <-- data [7] Aug 11 21:46:46.42: [ 8233]: <-- data [2] Aug 11 21:46:46.85: [ 8233]: --> [2:OK] Aug 11 21:46:46.85: [ 8233]: SEND send PPS (partial page
signal) Aug 11 21:46:46.85: [ 8233]: SEND send EOP (no more pages or
documents) Aug 11 21:46:46.85: [ 8233]: <-- [9:AT+FRH=3\r] Aug 11 21:46:47.03: [ 8233]: --> [7:CONNECT] Aug 11 21:46:48.20: [ 8233]: --> [2:OK] Aug 11 21:46:48.20: [ 8233]: SEND recv MCF (message
confirmation) Aug 11 21:46:48.20: [ 8233]: <-- [9:AT+FRS=7\r] Aug 11 21:46:48.35: [ 8233]: --> [2:OK] Aug 11 21:46:48.35: [ 8233]: SEND end page Aug 11 21:46:48.35: [ 8233]: SEND FAX (000025660): FROM
faxadmin@xxxxxxxxxxxx TO 207784**** (page 1 of 1 sent in 0:20) Aug 11 21:46:48.36: [ 8233]: SEND FAX (000025660): FROM
faxadmin@xxxxxxxxxxxx TO 207784**** (docq/doc34110.ps;f0 sent in 0:20) Aug 11 21:46:49.37: [ 8233]: <-- [9:AT+FTH=3\r] Aug 11 21:46:50.23: [ 8233]: --> [7:CONNECT] Aug 11 21:46:50.23: [ 8233]: <-- data [3] Aug 11 21:46:50.23: [ 8233]: <-- data [2] Aug 11 21:46:50.55: [ 8233]: --> [2:OK] Aug 11 21:46:50.55: [ 8233]: <-- [5:ATH0\r] Aug 11 21:46:51.73: [ 8233]: --> [2:OK] Aug 11 21:46:51.73: [ 8233]: SESSION END |