[hylafax-users] No response to "SEND end page"

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] No response to "SEND end page"
From: Louie Kostidis <louiek@xxxxxxxxxxxxxx>
Date: Wed, 23 Jul 2008 12:53:16 +1000

Title: No response to "SEND end page"

Hi all,

We’ve got about half a dozen fax numbers that cause our fax queue to stall. From the logs they all appear to be going along fine until the “SEND end page” line, but no signal is then received and the queue stalls, requiring a faxrm. Thanks for any help.

SunOS 5.10 Generic_120011-14 sun4v sparc SUNW,SPARC-Enterprise-T2000

server (HylaFAX (tm) Version 4.2.1) ready

Jul 23 09:23:26.87: [25783]: SESSION BEGIN 000004545 61393880456
Jul 23 09:23:26.87: [25783]: HylaFAX (tm) Version 4.2.1
Jul 23 09:23:26.87: [25783]: SEND FAX: JOB 3353 DEST 0393880456 COMMID 000004545 DEVICE '/dev/ttya'
Jul 23 09:23:26.87: [25783]: <-- [12:AT+FCLASS=1\r]
Jul 23 09:23:26.97: [25783]: --> [2:OK]
Jul 23 09:23:26.98: [25783]: DIAL 0393880456
Jul 23 09:23:26.98: [25783]: <-- [15:ATDT0393880456\r]
Jul 23 09:23:40.22: [25783]: --> [7:CONNECT]
Jul 23 09:23:41.89: [25783]: --> [2:OK]
Jul 23 09:23:41.89: [25783]: REMOTE NSF "00 00 09 02 08 64 61 39 38 80 45 6F FF FF FF FF 08 66 02 02 10 01 30 00 00 00 09"
Jul 23 09:23:41.89: [25783]: NSF remote fax equipment: Xerox/Toshiba
Jul 23 09:23:41.89: [25783]: NSF remote station ID: "oE<80>89ad"
Jul 23 09:23:41.89: [25783]: <-- [9:AT+FRH=3\r]
Jul 23 09:23:41.90: [25783]: --> [7:CONNECT]
Jul 23 09:23:42.61: [25783]: --> [2:OK]
Jul 23 09:23:42.61: [25783]: REMOTE CSI "613 93880456"
Jul 23 09:23:42.61: [25783]: <-- [9:AT+FRH=3\r]
Jul 23 09:23:42.62: [25783]: --> [7:CONNECT]
Jul 23 09:23:42.88: [25783]: --> [2:OK]
Jul 23 09:23:42.88: [25783]: REMOTE best rate 9600 bit/s
Jul 23 09:23:42.88: [25783]: REMOTE max A4 page width (215 mm)
Jul 23 09:23:42.88: [25783]: REMOTE max unlimited page length
Jul 23 09:23:42.88: [25783]: REMOTE best vres 7.7 line/mm
Jul 23 09:23:42.88: [25783]: REMOTE best format 2-D MR
Jul 23 09:23:42.88: [25783]: REMOTE best 20 ms, 10 ms/scanline
Jul 23 09:23:42.88: [25783]: USE 9600 bit/s
Jul 23 09:23:42.88: [25783]: USE 20 ms, 10 ms/scanline
Jul 23 09:23:42.88: [25783]: SEND file "docq/doc3356.ps;41"
Jul 23 09:23:42.88: [25783]: USE A4 page width (215 mm)
Jul 23 09:23:42.88: [25783]: USE unlimited page length
Jul 23 09:23:42.88: [25783]: USE 7.7 line/mm
Jul 23 09:23:42.88: [25783]: USE 2-D MR
Jul 23 09:23:42.88: [25783]: SEND training at v.29 9600 bit/s
Jul 23 09:23:42.88: [25783]: <-- [9:AT+FTH=3\r]
Jul 23 09:23:42.92: [25783]: --> [7:CONNECT]
Jul 23 09:23:42.92: [25783]: <-- data [23]
Jul 23 09:23:42.92: [25783]: <-- data [2]
Jul 23 09:23:44.71: [25783]: --> [7:CONNECT]
Jul 23 09:23:44.71: [25783]: <-- data [6]
Jul 23 09:23:44.71: [25783]: <-- data [2]
Jul 23 09:23:45.12: [25783]: --> [2:OK]
Jul 23 09:23:45.12: [25783]: <-- [9:AT+FTS=7\r]
Jul 23 09:23:45.21: [25783]: --> [2:OK]
Jul 23 09:23:45.21: [25783]: <-- [10:AT+FTM=96\r]
Jul 23 09:23:45.25: [25783]: --> [7:CONNECT]
Jul 23 09:23:45.25: [25783]: <-- data [1024]
Jul 23 09:23:45.25: [25783]: <-- data [776]
Jul 23 09:23:45.25: [25783]: <-- data [2]
Jul 23 09:23:47.20: [25783]: --> [2:OK]
Jul 23 09:23:47.20: [25783]: <-- [9:AT+FRH=3\r]
Jul 23 09:23:47.71: [25783]: --> [7:CONNECT]
Jul 23 09:23:48.71: [25783]: --> [2:OK]
Jul 23 09:23:48.71: [25783]: TRAINING succeeded
Jul 23 09:23:48.71: [25783]: DELAY 200 ms
Jul 23 09:23:48.92: [25783]: <-- [10:AT+FTM=96\r]
Jul 23 09:23:48.96: [25783]: --> [7:CONNECT]
Jul 23 09:23:48.96: [25783]: SEND begin page
Jul 23 09:23:48.96: [25783]: <-- data [1032]
Jul 23 09:23:48.96: [25783]: <-- data [1025]
Jul 23 09:23:48.96: [25783]: <-- data [1025]
Jul 23 09:23:48.96: [25783]: <-- data [1030]
Jul 23 09:23:48.96: [25783]: <-- data [1028]
Jul 23 09:23:48.96: [25783]: <-- data [1024]
Jul 23 09:23:48.96: [25783]: <-- data [1025]
Jul 23 09:23:48.96: [25783]: <-- data [1029]
Jul 23 09:23:48.96: [25783]: <-- data [1037]
Jul 23 09:23:48.96: [25783]: <-- data [1026]
Jul 23 09:23:48.96: [25783]: <-- data [1027]
Jul 23 09:23:48.96: [25783]: <-- data [1028]
Jul 23 09:23:48.96: [25783]: <-- data [1028]
Jul 23 09:23:48.96: [25783]: <-- data [1038]
Jul 23 09:23:48.96: [25783]: <-- data [1031]
Jul 23 09:23:48.96: [25783]: <-- data [1031]
Jul 23 09:23:48.96: [25783]: <-- data [1026]
Jul 23 09:23:48.97: [25783]: <-- data [1031]
Jul 23 09:23:48.97: [25783]: <-- data [1029]
Jul 23 09:23:48.97: [25783]: <-- data [1026]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1026]
Jul 23 09:23:48.97: [25783]: <-- data [1035]
Jul 23 09:23:48.97: [25783]: <-- data [841]
Jul 23 09:23:48.97: [25783]: SENT 27461 bytes of data
Jul 23 09:23:48.97: [25783]: <-- data [1033]
Jul 23 09:23:48.97: [25783]: <-- data [1033]
Jul 23 09:23:48.97: [25783]: <-- data [1032]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1033]
Jul 23 09:23:48.97: [25783]: <-- data [1032]
Jul 23 09:23:48.97: [25783]: <-- data [1035]
Jul 23 09:23:48.97: [25783]: <-- data [1028]
Jul 23 09:23:48.97: [25783]: <-- data [1026]
Jul 23 09:23:48.97: [25783]: <-- data [1027]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1026]
Jul 23 09:23:48.97: [25783]: <-- data [1027]
Jul 23 09:23:48.97: [25783]: <-- data [1028]
Jul 23 09:23:48.97: [25783]: <-- data [1028]
Jul 23 09:23:48.97: [25783]: <-- data [1024]
Jul 23 09:23:48.97: [25783]: <-- data [1024]
Jul 23 09:23:48.97: [25783]: <-- data [1024]
Jul 23 09:23:48.97: [25783]: <-- data [1024]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1024]
Jul 23 09:23:48.97: [25783]: <-- data [1029]
Jul 23 09:23:48.97: [25783]: <-- data [1029]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1029]
Jul 23 09:23:48.97: [25783]: <-- data [875]
Jul 23 09:23:48.97: [25783]: SENT 27498 bytes of data
Jul 23 09:23:48.97: [25783]: <-- data [1024]
Jul 23 09:23:48.97: [25783]: <-- data [1028]
Jul 23 09:23:48.97: [25783]: <-- data [1029]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1025]
Jul 23 09:23:48.97: [25783]: <-- data [1024]
Jul 23 09:23:48.98: [25783]: <-- data [1026]
Jul 23 09:23:48.98: [25783]: <-- data [1024]
Jul 23 09:23:48.98: [25783]: <-- data [1024]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1026]
Jul 23 09:23:48.98: [25783]: <-- data [1031]
Jul 23 09:23:48.98: [25783]: <-- data [1037]
Jul 23 09:23:48.98: [25783]: <-- data [1031]
Jul 23 09:23:48.98: [25783]: <-- data [1026]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1035]
Jul 23 09:23:48.98: [25783]: <-- data [1037]
Jul 23 09:23:48.98: [25783]: <-- data [1029]
Jul 23 09:23:48.98: [25783]: <-- data [1029]
Jul 23 09:23:48.98: [25783]: <-- data [1034]
Jul 23 09:23:48.98: [25783]: <-- data [1037]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [853]
Jul 23 09:23:48.98: [25783]: SENT 27473 bytes of data
Jul 23 09:23:48.98: [25783]: <-- data [1030]
Jul 23 09:23:48.98: [25783]: <-- data [1037]
Jul 23 09:23:48.98: [25783]: <-- data [1028]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1026]
Jul 23 09:23:48.98: [25783]: <-- data [1027]
Jul 23 09:23:48.98: [25783]: <-- data [1036]
Jul 23 09:23:48.98: [25783]: <-- data [1029]
Jul 23 09:23:48.98: [25783]: <-- data [1032]
Jul 23 09:23:48.98: [25783]: <-- data [1027]
Jul 23 09:23:48.98: [25783]: <-- data [1036]
Jul 23 09:23:48.98: [25783]: <-- data [1030]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1032]
Jul 23 09:23:48.98: [25783]: <-- data [1030]
Jul 23 09:23:48.98: [25783]: <-- data [1038]
Jul 23 09:23:48.98: [25783]: <-- data [1027]
Jul 23 09:23:48.98: [25783]: <-- data [1039]
Jul 23 09:23:48.98: [25783]: <-- data [1050]
Jul 23 09:23:48.98: [25783]: <-- data [1025]
Jul 23 09:23:48.98: [25783]: <-- data [1026]
Jul 23 09:23:48.98: [25783]: <-- data [1033]
Jul 23 09:23:48.98: [25783]: <-- data [1026]
Jul 23 09:23:48.98: [25783]: <-- data [1026]
Jul 23 09:23:48.98: [25783]: <-- data [597]
Jul 23 09:23:48.98: [25783]: SENT 27221 bytes of data
Jul 23 09:23:48.99: [25783]: <-- data [1026]
Jul 23 09:23:48.99: [25783]: <-- data [1030]
Jul 23 09:23:48.99: [25783]: <-- data [1036]
Jul 23 09:23:48.99: [25783]: <-- data [1039]
Jul 23 09:23:48.99: [25783]: <-- data [1034]
Jul 23 09:23:49.00: [25783]: <-- data [1032]
Jul 23 09:23:49.00: [25783]: <-- data [1032]
Jul 23 09:23:49.00: [25783]: <-- data [1025]
Jul 23 09:23:49.00: [25783]: <-- data [1025]
Jul 23 09:23:49.00: [25783]: <-- data [1025]
Jul 23 09:23:49.00: [25783]: <-- data [1032]
Jul 23 09:23:49.00: [25783]: <-- data [1032]
Jul 23 09:23:49.00: [25783]: <-- data [1034]
Jul 23 09:23:49.00: [25783]: <-- data [1025]
Jul 23 09:23:49.00: [25783]: <-- data [1026]
Jul 23 09:23:49.00: [25783]: <-- data [736]
Jul 23 09:23:49.00: [25783]: SENT 16096 bytes of data
Jul 23 09:23:49.00: [25783]: SEND 2D RTC
Jul 23 09:23:49.00: [25783]: <-- data [30]
Jul 23 09:23:49.00: [25783]: <-- data [2]
Jul 23 09:23:49.00: [25783]: SEND end page

and the entry from faxstat –d is of the form:

3078 63 F fax 0393880456 0:1 0:12 Send program terminated a

Follow-Ups:
- Re: [hylafax-users] No response to "SEND end page"
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] Asterisk->t38modem(+opal)->Hylafax
Next by Date: [hylafax-users] Problem connectiong to hylafax server
Previous by thread: Re: [hylafax-users] sendFax error
Next by thread: Re: [hylafax-users] No response to "SEND end page"
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions