![]() |
In addition, below is the result after restarting the HylaFAX service and running faxstat. It seems that the 9 channels are behaving as if they are not there - they aren't even initializing. [root@faxbroadcast ~]# service hylafax restart Shutting down HylaFAX queue manager (faxq): [ OK ] Shutting down HylaFAX server (hfaxd): [ OK ] Starting HylaFAX queue manager (faxq): [ OK ] Starting HylaFAX server (hfaxd): [ OK ] Restarting HylaFAX modem manager (faxgetty): [ OK ] [root@faxbroadcast ~]# faxstat HylaFAX scheduler on faxbroadcast.bettertelco.com: Running Modem ttyds01 (+61292630100): Running and idle Modem ttyds02 (+61292630100): Running and idle Modem ttyds03 (+61292630100): Running and idle Modem ttyds04 (+61292630100): Running and idle Modem ttyds05 (+61292630100): Running and idle Modem ttyds06 (+61292630100): Running and idle Modem ttyds07 (+61292630100): Running and idle Modem ttyds08 (+61292630100): Running and idle Modem ttyds09 (+61292630100): Running and idle Modem ttyds10 (+61292630100): Initializing server Modem ttyds11 (+61292630100): Initializing server Modem ttyds12 (+61292630100): Initializing server Modem ttyds13 (+61292630100): Initializing server Modem ttyds14 (+61292630100): Initializing server Modem ttyds15 (+61292630100): Initializing server Modem ttyds16 (+61292630100): Initializing server Modem ttyds17 (+61292630100): Initializing server Modem ttyds18 (+61292630100): Initializing server Modem ttyds19 (+61292630100): Initializing server Modem ttyds20 (+61292630100): Initializing server Modem ttyds21 (+61292630100): Initializing server Modem ttyds22 (+61292630100): Initializing server Modem ttyds23 (+61292630100): Initializing server Modem ttyds24 (+61292630100): Initializing server Modem ttyds25 (+61292630100): Initializing server Modem ttyds26 (+61292630100): Initializing server Modem ttyds27 (+61292630100): Initializing server Modem ttyds28 (+61292630100): Initializing server Modem ttyds29 (+61292630100): Initializing server Modem ttyds30 (+61292630100): Initializing server [root@faxbroadcast ~]# HylaFAX scheduler on faxbroadcast.bettertelco.com: Running Modem ttyds01 (+61292630100): Running and idle Modem ttyds02 (+61292630100): Running and idle Modem ttyds03 (+61292630100): Running and idle Modem ttyds04 (+61292630100): Running and idle Modem ttyds05 (+61292630100): Running and idle Modem ttyds06 (+61292630100): Running and idle Modem ttyds07 (+61292630100): Running and idle Modem ttyds08 (+61292630100): Running and idle Modem ttyds09 (+61292630100): Running and idle Modem ttyds10 (+61292630100): Sending job 32020 Modem ttyds11 (+61292630100): Sending job 31934 Modem ttyds12 (+61292630100): Sending job 31589 Modem ttyds13 (+61292630100): Initializing server Modem ttyds14 (+61292630100): Sending job 32022 Modem ttyds15 (+61292630100): Sending job 31906 Modem ttyds16 (+61292630100): Sending job 32016 Modem ttyds17 (+61292630100): Initializing server Modem ttyds18 (+61292630100): Initializing server Modem ttyds19 (+61292630100): Sending job 31918 Modem ttyds20 (+61292630100): Sending job 31935 Modem ttyds21 (+61292630100): Sending job 32024 Modem ttyds22 (+61292630100): Sending job 32021 Modem ttyds23 (+61292630100): Sending job 31912 Modem ttyds24 (+61292630100): Sending job 32023 Modem ttyds25 (+61292630100): Sending job 31577 Modem ttyds26 (+61292630100): Sending job 31797 Modem ttyds27 (+61292630100): Sending job 32025 Modem ttyds28 (+61292630100): Initializing server Modem ttyds29 (+61292630100): Sending job 31765 Modem ttyds30 (+61292630100): Sending job 32010 On Thu, Jun 26, 2008 at 7:44 AM, Matt Arnilo S. Baluyos (Mailing Lists) <matt.baluyos.lists@xxxxxxxxx> wrote: > Hi all, > > I have set up a HylaFAX+ server for fax broadcasting. It uses a > Dialogic/Eicon Diva PRI E1 card and connected to an ISDN30 line. > > I'm having this issue wherein not all channels are being used. When > I'm doing a fax broadcast, I am missing 9 channels from the 30 > channels. All the config.ttydsXX files are configured the same way. > > Any thoughts as to why this is happening? Technical support for the > card says the card should be OK based on a trace log sent to them and > the service provider had said that all 30 channels are enabled for the > line. > > Below is the output from a faxstat command. If you notice, ttyds01 to > ttyds09 are always in the "Running and idle" status. > > HylaFAX scheduler on faxbroadcast.bettertelco.com: Running > Modem ttyds01 (+61292630100): Running and idle > Modem ttyds02 (+61292630100): Running and idle > Modem ttyds03 (+61292630100): Running and idle > Modem ttyds04 (+61292630100): Running and idle > Modem ttyds05 (+61292630100): Running and idle > Modem ttyds06 (+61292630100): Running and idle > Modem ttyds07 (+61292630100): Running and idle > Modem ttyds08 (+61292630100): Running and idle > Modem ttyds09 (+61292630100): Running and idle > Modem ttyds10 (+61292630100): Sending job 32020 > Modem ttyds11 (+61292630100): Sending job 31934 > Modem ttyds12 (+61292630100): Sending job 31589 > Modem ttyds13 (+61292630100): Initializing server > Modem ttyds14 (+61292630100): Sending job 32022 > Modem ttyds15 (+61292630100): Sending job 31906 > Modem ttyds16 (+61292630100): Sending job 32016 > Modem ttyds17 (+61292630100): Initializing server > Modem ttyds18 (+61292630100): Initializing server > Modem ttyds19 (+61292630100): Sending job 31918 > Modem ttyds20 (+61292630100): Sending job 31935 > Modem ttyds21 (+61292630100): Sending job 32024 > Modem ttyds22 (+61292630100): Sending job 32021 > Modem ttyds23 (+61292630100): Sending job 31912 > Modem ttyds24 (+61292630100): Sending job 32023 > Modem ttyds25 (+61292630100): Sending job 31577 > Modem ttyds26 (+61292630100): Sending job 31797 > Modem ttyds27 (+61292630100): Sending job 32025 > Modem ttyds28 (+61292630100): Initializing server > Modem ttyds29 (+61292630100): Sending job 31765 > Modem ttyds30 (+61292630100): Sending job 32010 -- Stand before it and there is no beginning. Follow it and there is no end. Stay with the ancient Tao, Move with the present. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*