[hylafax-users] Receive aborted due to operator intervention

["Jonny Berthiaume" <jberthiaume@xxxxxxxxxx>]

Hi,

 

About a month ago, some of our client started to complain about their difficulty to reach us by fax.

 

I started to look through the logs and saw a lot of this error: "Receive aborted due to operator intervention". I joined short 3 logs containing this error.

 

First, I searched the web for any indication of how it can happen, but I can't find anything related to this particular error message. It's true there are some results with google, but they all imply a long communication log with a call that last at least 3 minutes without any interaction with another modem. My logs show clearly that's not my case here, since all the calls are straight forward, there are no hang up, no big silence of 2 or 3 minutes.

 

I use HylaFAX 4.1.5 on linux slackware 8.1 with kernel 2.4.18 (I know, it's old...). My modem is a Lucent Multi-Tech 5634ZPX- NV (no voice). I never had any problem before with this modem or with my installation. I also joined a copy of my config file.

 

Any idea why there are all those "Abort" lines?

 

I also found a lot of log files that includes "MODEM <Empty line>" all the way. It happen really to often to be a wrong dialed number. The log c00021273 is one of many example I got. Any idea if the 2 problems are linked somehow or what might cause this?

 

Thanks

 

Jonny

 

 

Jun 03 14:44:42.35: [  242]: SESSION BEGIN 00020659 xxxxxxxxxxx
Jun 03 14:44:42.35: [  242]: HylaFAX (tm) Version 4.1.5
Jun 03 14:44:42.35: [  242]: <-- [4:ATA\r]
Jun 03 14:44:52.16: [  242]: --> [7:CONNECT]
Jun 03 14:44:52.16: [  242]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS5'
Jun 03 14:44:52.16: [  242]: RECV FAX: begin
Jun 03 14:44:52.16: [  242]: <-- data [23]
Jun 03 14:44:52.16: [  242]: <-- data [2]
Jun 03 14:44:52.18: [  242]: --> [7:CONNECT]
Jun 03 14:44:52.18: [  242]: <-- data [10]
Jun 03 14:44:52.18: [  242]: <-- data [2]
Jun 03 14:44:53.44: [  242]: --> [2:OK]
Jun 03 14:44:53.44: [  242]: <-- [9:AT+FRH=3\r]
Jun 03 14:44:54.05: [  242]: --> [7:CONNECT]
Jun 03 14:44:55.48: [  242]: --> [2:OK]
Jun 03 14:44:55.48: [  242]: REMOTE wants 14400 bit/s
Jun 03 14:44:55.48: [  242]: REMOTE wants page width 1728 pixels in 215 mm
Jun 03 14:44:55.48: [  242]: REMOTE wants unlimited page length
Jun 03 14:44:55.48: [  242]: REMOTE wants 7.7 line/mm
Jun 03 14:44:55.48: [  242]: REMOTE wants 2-D MR
Jun 03 14:44:55.48: [  242]: RECV training at v.17 14400 bit/s
Jun 03 14:44:55.48: [  242]: <-- [11:AT+FRM=145\r]
Jun 03 14:44:57.21: [  242]: --> [7:CONNECT]
Jun 03 14:44:58.73: [  242]: RECV: TCF 2736 bytes, 0% non-zero, 2729 zero-run
Jun 03 14:44:58.73: [  242]: --> [10:NO CARRIER]
Jun 03 14:44:58.73: [  242]: DELAY 75 ms
Jun 03 14:44:58.81: [  242]: TRAINING succeeded
Jun 03 14:44:58.81: [  242]: <-- [9:AT+FTH=3\r]
Jun 03 14:44:59.77: [  242]: --> [7:CONNECT]
Jun 03 14:44:59.77: [  242]: <-- data [3]
Jun 03 14:44:59.77: [  242]: <-- data [2]
Jun 03 14:45:00.16: [  242]: --> [2:OK]
Jun 03 14:45:00.16: [  242]: <-- [11:AT+FRM=146\r]
Jun 03 14:45:01.30: [  242]: --> [7:CONNECT]
Jun 03 14:45:01.30: [  242]: RECV: begin page
Jun 03 14:45:13.38: [  242]: RECV: 2155 total lines, 0 bad lines, 0 consecutive bad lines
Jun 03 14:45:13.38: [  242]: RECV: end page
Jun 03 14:45:13.38: [  242]: --> [10:NO CARRIER]
Jun 03 14:45:13.38: [  242]: ABORT: job abort requested
Jun 03 14:45:13.38: [  242]: RECV FAX (00020659): recvq/fax05392.tif from <UNSPECIFIED>, route to <unspecified>, 0 pages in 0:21
Jun 03 14:45:13.38: [  242]: RECV FAX: Receive aborted due to operator intervention
Jun 03 14:45:13.38: [  242]: <-- [9:AT+FTH=3\r]
Jun 03 14:45:14.34: [  242]: --> [7:CONNECT]
Jun 03 14:45:14.34: [  242]: RECV FAX (00020659): session with <UNSPECIFIED> terminated abnormally: Receive aborted due to operator intervention
Jun 03 14:45:14.34: [  242]: RECV FAX: bin/faxrcvd "recvq/fax05392.tif" "ttyS5" "00020659" "Receive aborted due to operator intervention" "" ""
Jun 03 14:45:14.46: [  242]: RECV FAX: end
Jun 03 14:45:14.46: [  242]: SESSION END

Jun 11 16:19:42.76: [ 8362]: SESSION BEGIN 00021210 xxxxxxxxxxx
Jun 11 16:19:42.76: [ 8362]: HylaFAX (tm) Version 4.1.5
Jun 11 16:19:42.76: [ 8362]: <-- [4:ATA\r]
Jun 11 16:19:54.02: [ 8362]: --> [7:CONNECT]
Jun 11 16:19:54.02: [ 8362]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS5'
Jun 11 16:19:54.02: [ 8362]: RECV FAX: begin
Jun 11 16:19:54.02: [ 8362]: <-- data [23]
Jun 11 16:19:54.02: [ 8362]: <-- data [2]
Jun 11 16:19:54.03: [ 8362]: --> [7:CONNECT]
Jun 11 16:19:54.03: [ 8362]: <-- data [10]
Jun 11 16:19:54.03: [ 8362]: <-- data [2]
Jun 11 16:19:55.30: [ 8362]: --> [2:OK]
Jun 11 16:19:55.30: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 11 16:19:55.60: [ 8362]: --> [7:CONNECT]
Jun 11 16:19:57.23: [ 8362]: --> [2:OK]
Jun 11 16:19:57.23: [ 8362]: REMOTE TSI "xxxxxxxxxxx"
Jun 11 16:19:57.23: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 11 16:19:57.24: [ 8362]: --> [7:CONNECT]
Jun 11 16:19:57.50: [ 8362]: --> [2:OK]
Jun 11 16:19:57.50: [ 8362]: REMOTE wants 14400 bit/s
Jun 11 16:19:57.50: [ 8362]: REMOTE wants page width 1728 pixels in 215 mm
Jun 11 16:19:57.50: [ 8362]: REMOTE wants unlimited page length
Jun 11 16:19:57.50: [ 8362]: REMOTE wants 7.7 line/mm
Jun 11 16:19:57.50: [ 8362]: REMOTE wants 2-D MR
Jun 11 16:19:57.50: [ 8362]: RECV training at v.17 14400 bit/s
Jun 11 16:19:57.50: [ 8362]: <-- [11:AT+FRM=145\r]
Jun 11 16:19:59.25: [ 8362]: --> [7:CONNECT]
Jun 11 16:20:00.79: [ 8362]: RECV: TCF 2784 bytes, 1% non-zero, 2754 zero-run
Jun 11 16:20:00.79: [ 8362]: --> [10:NO CARRIER]
Jun 11 16:20:00.79: [ 8362]: DELAY 75 ms
Jun 11 16:20:00.87: [ 8362]: TRAINING succeeded
Jun 11 16:20:00.87: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 11 16:20:01.83: [ 8362]: --> [7:CONNECT]
Jun 11 16:20:01.83: [ 8362]: <-- data [3]
Jun 11 16:20:01.83: [ 8362]: <-- data [2]
Jun 11 16:20:02.22: [ 8362]: --> [2:OK]
Jun 11 16:20:02.22: [ 8362]: <-- [11:AT+FRM=146\r]
Jun 11 16:20:03.16: [ 8362]: --> [7:CONNECT]
Jun 11 16:20:03.16: [ 8362]: RECV: begin page
Jun 11 16:20:30.09: [ 8362]: RECV: 2135 total lines, 0 bad lines, 0 consecutive bad lines
Jun 11 16:20:30.09: [ 8362]: RECV: end page
Jun 11 16:20:30.09: [ 8362]: --> [10:NO CARRIER]
Jun 11 16:20:30.09: [ 8362]: ABORT: job abort requested
Jun 11 16:20:30.09: [ 8362]: RECV FAX (00021210): recvq/fax05770.tif from xxxxxxxxxxx, route to <unspecified>, 0 pages in 0:36
Jun 11 16:20:30.09: [ 8362]: RECV FAX: Receive aborted due to operator intervention
Jun 11 16:20:30.09: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 11 16:20:31.05: [ 8362]: --> [7:CONNECT]
Jun 11 16:20:31.05: [ 8362]: RECV FAX (00021210): session with xxxxxxxxxxx terminated abnormally: Receive aborted due to operator intervention
Jun 11 16:20:31.05: [ 8362]: RECV FAX: bin/faxrcvd "recvq/fax05770.tif" "ttyS5" "00021210" "Receive aborted due to operator intervention" "" ""
Jun 11 16:20:31.17: [ 8362]: RECV FAX: end
Jun 11 16:20:31.17: [ 8362]: SESSION END

Jun 12 04:59:33.76: [ 8362]: SESSION BEGIN 00021221 xxxxxxxxxxx
Jun 12 04:59:33.76: [ 8362]: HylaFAX (tm) Version 4.1.5
Jun 12 04:59:33.76: [ 8362]: <-- [4:ATA\r]
Jun 12 04:59:43.78: [ 8362]: --> [7:CONNECT]
Jun 12 04:59:43.78: [ 8362]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS5'
Jun 12 04:59:43.78: [ 8362]: RECV FAX: begin
Jun 12 04:59:43.81: [ 8362]: <-- data [23]
Jun 12 04:59:43.81: [ 8362]: <-- data [2]
Jun 12 04:59:43.83: [ 8362]: --> [7:CONNECT]
Jun 12 04:59:43.83: [ 8362]: <-- data [10]
Jun 12 04:59:43.83: [ 8362]: <-- data [2]
Jun 12 04:59:45.09: [ 8362]: --> [2:OK]
Jun 12 04:59:45.09: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 04:59:45.76: [ 8362]: --> [7:CONNECT]
Jun 12 04:59:47.47: [ 8362]: --> [2:OK]
Jun 12 04:59:47.47: [ 8362]: REMOTE TSI "xxxxxx"
Jun 12 04:59:47.47: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 04:59:47.48: [ 8362]: --> [7:CONNECT]
Jun 12 04:59:48.78: [ 8362]: --> [2:OK]
Jun 12 04:59:48.78: [ 8362]: REMOTE wants 14400 bit/s
Jun 12 04:59:48.78: [ 8362]: REMOTE wants page width 1728 pixels in 215 mm
Jun 12 04:59:48.78: [ 8362]: REMOTE wants unlimited page length
Jun 12 04:59:48.78: [ 8362]: REMOTE wants 7.7 line/mm
Jun 12 04:59:48.78: [ 8362]: REMOTE wants 2-D MR
Jun 12 04:59:48.78: [ 8362]: RECV training at v.17 14400 bit/s
Jun 12 04:59:48.78: [ 8362]: <-- [11:AT+FRM=145\r]
Jun 12 04:59:50.71: [ 8362]: --> [7:CONNECT]
Jun 12 04:59:52.24: [ 8362]: RECV: TCF 2752 bytes, 1% non-zero, 2700 zero-run
Jun 12 04:59:52.24: [ 8362]: --> [10:NO CARRIER]
Jun 12 04:59:52.24: [ 8362]: DELAY 75 ms
Jun 12 04:59:52.32: [ 8362]: TRAINING succeeded
Jun 12 04:59:52.32: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 12 04:59:53.28: [ 8362]: --> [7:CONNECT]
Jun 12 04:59:53.28: [ 8362]: <-- data [3]
Jun 12 04:59:53.28: [ 8362]: <-- data [2]
Jun 12 04:59:53.67: [ 8362]: --> [2:OK]
Jun 12 04:59:53.67: [ 8362]: <-- [11:AT+FRM=146\r]
Jun 12 04:59:54.69: [ 8362]: --> [7:CONNECT]
Jun 12 04:59:54.69: [ 8362]: RECV: begin page
Jun 12 05:00:18.17: [ 8362]: RECV: 2233 total lines, 0 bad lines, 0 consecutive bad lines
Jun 12 05:00:18.17: [ 8362]: RECV: end page
Jun 12 05:00:18.17: [ 8362]: --> [10:NO CARRIER]
Jun 12 05:00:18.17: [ 8362]: ABORT: job abort requested
Jun 12 05:00:18.17: [ 8362]: RECV FAX (00021221): recvq/fax05781.tif from xxxxxxx, route to <unspecified>, 0 pages in 0:35
Jun 12 05:00:18.18: [ 8362]: RECV FAX: Receive aborted due to operator intervention
Jun 12 05:00:18.19: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 12 05:00:19.15: [ 8362]: --> [7:CONNECT]
Jun 12 05:00:19.15: [ 8362]: RECV FAX (00021221): session with xxxxxx terminated abnormally: Receive aborted due to operator intervention
Jun 12 05:00:19.15: [ 8362]: RECV FAX: bin/faxrcvd "recvq/fax05781.tif" "ttyS5" "00021221" "Receive aborted due to operator intervention" "" ""
Jun 12 05:00:19.43: [ 8362]: RECV FAX: end
Jun 12 05:00:19.43: [ 8362]: SESSION END

# $Id: rc288dpi-1,v 1.4 2002/04/07 20:29:26 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#

#
# Configuration for a Rockwell RC288DPi-based Class 1 modem.
#    Hayes Optima 28800		firmware rev ???
#    Microcom DeskPorte 28.8S	firmware rev V1.100K-V34_DS
#    PPI PM288FXMT		firmware rev 1.57
#
# Note that the modem does not lock the line rate for fax
# receive (at least not the PM288FXMT); but not sure whether
# current flow control settings are maintained or if it
# switches to XON/XOFF (testing host was too fast to see).
#
#
CountryCode:		1
AreaCode:               418
FAXNumber:              +1.XXX.XXX.XXXX

LongDistancePrefix:	1
InternationalPrefix:	011
DialStringRules:        etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0664
LogFileMode:		0600
DeviceMode:		0666
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:		""
LocalIdentifier:        "XXXXXXX"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:          "De:  %%l  |%Y/%m/%d  %H:%M:%S|Page %%p de %%t"
MaxRecvPages:           99
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use this to supply a hint
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	xonxoff
#
ModemNoFlowCmd:		AT&K0		# setup no flow control
ModemHardFlowCmd:	AT&K3		# setup hardware flow control
ModemSoftFlowCmd:	AT&K4		# setup software flow control
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:	!Rockwell
ModemModelQueryCmd:	!RC288DPi
ModemRevQueryCmd:	ATI3		# product information
#
ModemDialCmd:		ATDT%s
#
RecvDataFormat:		"1-D MR"
RTNHandlingMethod:	Ignore
#
PercentGoodLines:    75
MaxConsecutiveBadLines:    15
#

Jun 12 16:44:04.84: [ 8362]: SESSION BEGIN 00021273 xxxxxxxxxxx
Jun 12 16:44:04.84: [ 8362]: HylaFAX (tm) Version 4.1.5
Jun 12 16:44:04.84: [ 8362]: <-- [4:ATA\r]
Jun 12 16:44:14.69: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:14.69: [ 8362]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS5'
Jun 12 16:44:14.69: [ 8362]: RECV FAX: begin
Jun 12 16:44:14.69: [ 8362]: <-- data [23]
Jun 12 16:44:14.69: [ 8362]: <-- data [2]
Jun 12 16:44:14.70: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:14.70: [ 8362]: <-- data [10]
Jun 12 16:44:14.70: [ 8362]: <-- data [2]
Jun 12 16:44:15.98: [ 8362]: --> [2:OK]
Jun 12 16:44:15.98: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 16:44:19.08: [ 8362]: --> [0:]
Jun 12 16:44:19.08: [ 8362]: MODEM <Empty line>
Jun 12 16:44:19.08: [ 8362]: <-- data [1]
Jun 12 16:44:19.09: [ 8362]: --> [2:]
Jun 12 16:44:19.09: [ 8362]: --> [2:OK]
Jun 12 16:44:19.09: [ 8362]: DELAY 1500 ms
Jun 12 16:44:20.59: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 12 16:44:21.55: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:21.55: [ 8362]: <-- data [23]
Jun 12 16:44:21.55: [ 8362]: <-- data [2]
Jun 12 16:44:21.56: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:21.56: [ 8362]: <-- data [10]
Jun 12 16:44:21.56: [ 8362]: <-- data [2]
Jun 12 16:44:22.83: [ 8362]: --> [2:OK]
Jun 12 16:44:22.83: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 16:44:25.93: [ 8362]: --> [0:]
Jun 12 16:44:25.93: [ 8362]: MODEM <Empty line>
Jun 12 16:44:25.93: [ 8362]: <-- data [1]
Jun 12 16:44:25.94: [ 8362]: --> [2:]
Jun 12 16:44:25.94: [ 8362]: --> [2:OK]
Jun 12 16:44:25.94: [ 8362]: DELAY 1500 ms
Jun 12 16:44:27.44: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 12 16:44:28.40: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:28.40: [ 8362]: <-- data [23]
Jun 12 16:44:28.40: [ 8362]: <-- data [2]
Jun 12 16:44:28.41: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:28.41: [ 8362]: <-- data [10]
Jun 12 16:44:28.41: [ 8362]: <-- data [2]
Jun 12 16:44:29.68: [ 8362]: --> [2:OK]
Jun 12 16:44:29.68: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 16:44:32.78: [ 8362]: --> [0:]
Jun 12 16:44:32.78: [ 8362]: MODEM <Empty line>
Jun 12 16:44:32.78: [ 8362]: <-- data [1]
Jun 12 16:44:32.79: [ 8362]: --> [2:]
Jun 12 16:44:32.79: [ 8362]: --> [2:OK]
Jun 12 16:44:32.79: [ 8362]: DELAY 1500 ms
Jun 12 16:44:34.29: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 12 16:44:35.25: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:35.25: [ 8362]: <-- data [23]
Jun 12 16:44:35.25: [ 8362]: <-- data [2]
Jun 12 16:44:35.26: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:35.26: [ 8362]: <-- data [10]
Jun 12 16:44:35.26: [ 8362]: <-- data [2]
Jun 12 16:44:36.53: [ 8362]: --> [2:OK]
Jun 12 16:44:36.53: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 16:44:39.63: [ 8362]: --> [0:]
Jun 12 16:44:39.63: [ 8362]: MODEM <Empty line>
Jun 12 16:44:39.63: [ 8362]: <-- data [1]
Jun 12 16:44:39.64: [ 8362]: --> [2:]
Jun 12 16:44:39.64: [ 8362]: --> [2:OK]
Jun 12 16:44:39.64: [ 8362]: DELAY 1500 ms
Jun 12 16:44:41.14: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 12 16:44:42.10: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:42.10: [ 8362]: <-- data [23]
Jun 12 16:44:42.10: [ 8362]: <-- data [2]
Jun 12 16:44:42.11: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:42.11: [ 8362]: <-- data [10]
Jun 12 16:44:42.11: [ 8362]: <-- data [2]
Jun 12 16:44:43.38: [ 8362]: --> [2:OK]
Jun 12 16:44:43.38: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 16:44:46.48: [ 8362]: --> [0:]
Jun 12 16:44:46.48: [ 8362]: MODEM <Empty line>
Jun 12 16:44:46.48: [ 8362]: <-- data [1]
Jun 12 16:44:46.49: [ 8362]: --> [2:]
Jun 12 16:44:46.49: [ 8362]: --> [2:OK]
Jun 12 16:44:46.49: [ 8362]: DELAY 1500 ms
Jun 12 16:44:47.99: [ 8362]: <-- [9:AT+FTH=3\r]
Jun 12 16:44:48.95: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:48.95: [ 8362]: <-- data [23]
Jun 12 16:44:48.95: [ 8362]: <-- data [2]
Jun 12 16:44:48.96: [ 8362]: --> [7:CONNECT]
Jun 12 16:44:48.96: [ 8362]: <-- data [10]
Jun 12 16:44:48.96: [ 8362]: <-- data [2]
Jun 12 16:44:50.23: [ 8362]: --> [2:OK]
Jun 12 16:44:50.23: [ 8362]: <-- [9:AT+FRH=3\r]
Jun 12 16:44:53.33: [ 8362]: --> [0:]
Jun 12 16:44:53.33: [ 8362]: MODEM <Empty line>
Jun 12 16:44:53.33: [ 8362]: <-- data [1]
Jun 12 16:44:53.34: [ 8362]: --> [2:]
Jun 12 16:44:53.34: [ 8362]: --> [2:OK]
Jun 12 16:44:53.34: [ 8362]: RECV FAX: No answer (T.30 T1 timeout)
Jun 12 16:44:53.34: [ 8362]: RECV FAX: end
Jun 12 16:44:53.34: [ 8362]: SESSION END