Re: [hylafax-users] Bulk Faxing

["Michael Wilson" <mikejww@xxxxxxxxxxxxxx>]

Scott,

Have looked at hosts.hfaxd and it is only IP addresses not usernames and passwords.  Only thing that I can get working or should I say indicating that it is working is the Server Connection light being green.  Communication light is red.  That seems to work if the Asterisk PBX IP address is input.  Other than that, whenever I put anything in the Admin Password or Login/Login Password I get the response from the CLI of:

 == Connect attempt from '192.168.1.XX' unable to authenticate

Any ideas?

MIchael

2008/6/5 Scott Wolfe <scottwolfe@xxxxxxxxx>:

Its been a while since I have touched this, but the login information should be same information used in your hosts.hfaxd when you set up a new user.

 

-Scott

 

 

 

----- Original Message -----

From: Michael Wilson

To: hylafax-users@xxxxxxxxxxx

Cc: Scott Wolfe

Sent: Wednesday, June 04, 2008 4:00 PM

Subject: Re: [hylafax-users] Bulk Faxing

Looks the business, no docs I see, whats the Login user and Password detail?

2008/6/4 Scott Wolfe <scottwolfe@xxxxxxxxx>:

Michael,

  I wrote a little app to do this. You can check it out at: www.astassistant.com.  Scroll to the bottom of the screen.

----- Original Message -----

From: Michael Wilson

To: hylafax-users@xxxxxxxxxxx

Sent: Wednesday, June 04, 2008 12:46 PM

Subject: [hylafax-users] Bulk Faxing

Hi there,

I presently run Hylafax on my Asterisk PBX using IAXModem and Zaptel hardware.  What I want to be able to do is bulk fax to a list of fax numbers.  I presently use the winprint print device to fax from applications.  Is there a robotic way of doing this, can a flat file be used as a data source etc.

Help is appreciated.