[hylafax-users] Eicon Diva 4BRI-8M 1.0 anyone?

[Carlos Lorenzo Matés <clmates@xxxxxxxxxxx>]

Hi.

We have a working hylafax installation over an SLES 9 on an old compaq 
proliant 6500R

We setup this installation using a new Eicon Diva BRI-2M 2.0 without any 
problem (configured as 2 tty ports, class 2.0 and using ddi) 

then we tried to add an old 4BRI-8M 1.0 that we had working on another server 
with (A Windows NT one with ZetaFax)

we have it configured as 8 tty ports, class 2.0 and using ddi, we have 
successfully received and sent faxes, but then an incoming call freezes the 
server

the call log only says this

Mar 06 13:05:31.39: [10653]: SESSION BEGIN 000002238 34981633285
Mar 06 13:05:31.39: [10653]: HylaFAX (tm) Version 4.4.0
Mar 06 13:05:31.39: [10653]: CallID: "981633285" "0933837756"
Mar 06 13:05:31.39: [10653]: <-- [4:ATA\r]
Mar 06 13:05:41.29: [10653]: --> [8:+FHNG: 1]
Mar 06 13:05:41.29: [10653]: REMOTE HANGUP: Ring detect without successful 
handshake (code 1)
Mar 06 13:05:41.29: [10653]: ANSWER: Ring detected without successful 
handshake
Mar 06 13:05:41.29: [10653]: Ring detected without successful handshake
Mar 06 13:05:41.29: [10653]: SESSION END


anyone has a working card like that?

thanks


-- 
Un saludo.

Carlos Lorenzo Matés.
clmates AT mundo-r DOT com

Attachment: signature.asc
Description: This is a digitally signed message part.