[hylafax-users] modem config for apple USB modem

[Yoshi <ml@xxxxxxxxxxxxxxxx>]

Hello.

I have Mac mini and apple USB modem
(usb modem web site)
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore? 
spart=MA034Z%2FA

and I installed hylafax along guidance.
http://www.hylafax.org/content/ 
Handbook:Source_Code_Install#Mac_OS_X_Guidance

And now I succeeded to send fax from Mac,
but receiving is failed. I ringed the mac, but it didn't answer.

By viewing log in /var/spool/hylafax/logs/, it appeared that
an error occured when answer.

Oct 09 18:55:38.27: [18580]: SESSION BEGIN 000000007 81252747111
Oct 09 18:55:38.27: [18580]: HylaFAX (tm) Version 4.4.0
Oct 09 18:55:38.27: [18580]: <-- [6:AT*FR\r]
Oct 09 18:55:38.31: [18580]: --> [5:ERROR]
Oct 09 18:55:38.31: [18580]: MODEM Command error
Oct 09 18:55:38.31: [18580]: ANSWER:
Oct 09 18:55:38.31: [18580]: SESSION END

So I edited config file (etc/config.tty.usbmodem) and changed:
From:
ModemAnswerCmd:         "AT*FR\rATA"
To:
ModemAnswerCmd:         "ATA\r"

I the mac started to answer the call, but it soon ends in error.
The sender fax machine reports 'No Response'.
Then I thought that modem configuration is wrong.

My modem configs are following, and I would like to get advice
to achieve successful sending and receiving.

(modem config: config.tty.usbmodem)
ModemType:              Class1          # use class 1 interface
ModemRate:              19200           # locked for fax  
sending&receiving
ModemFlowControl:       rtscts          # default
ModemNoFlowCmd:         AT\Q            # disable flow control cmd
ModemSoftFlowCmd:       AT&R1\Q1        # software flow control cmd
ModemHardFlowCmd:       AT&R\Q3         # hardware flow control cmd
ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
ModemSetupAACmd:        AT+FAA=1
ModemAnswerCmd:         "ATA\r"
ModemWaitForConnect:   yes             # modem sends FAX/DATA first
ModemAnswerDataBeginCmd:"ATO\n<waitfor\072CONNECT>"
ModemMfrQueryCmd:       !Motorola
ModemModelQueryCmd:     !28.8
ModemRevQueryCmd:       AT%V            # model and firmware rev
ModemDialCmd:           ATDT%s          # T for tone dialing

Thank you.

Yoshi


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*