Re: [hylafax-users] asterisk + iaxmodem + hylafax

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

gibbe gabba wrote:

> hylafax doesnt seem to detect a carrier signal.


Your log shows that *iaxmodem* didn't detect a carrier signal.  (Carrier 
detection is done largely on the modem-side.)  So this is probably an 
issue with the call audio itself or (less-likely) with iaxmodem.  There 
is an extremely remote chance that it is a HylaFAX issue.

So my recommendation would be to...

1) take a look at your zttest results.  Run zttest... let it run for a 
minute.  If you get anything less than 99.98% then there is probably a 
hardware configuration problem that you need to address to allow the zap 
device more interrupt resources (e.g. move the card to a different slot).

2) make an audio recording and send it to me (read the README file found 
in the iaxmodem source code on how to do this... or 
http://iaxmodem.sourceforge.net/howto.php)

And in the remote chance that it is a HylaFAX issue...

3) you could upgrade to HylaFAX+ 5.1.9 (http://hylafax.sourceforge.net) 
which handles this kind of situation you show in the logs slightly 
different, and may cause for a different outcome.

HOWEVER...

Based on my experience, chances are that the problem is that you're 
either using VoIP for faxing (uh-oh) or your zap card is misconfigured 
and the zttest results will show it.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*