[hylafax-users] Problem setting up Intel Satisfaxtion Modem/400e

[Christopher Hilton <chris@xxxxxxxxxxxx>]

Hi,

I'm trying to get hylafax going on FreeBSD 6.2 Stable in a receive only 
setup. At the end of the day I'd like to have the fax modem setup on the 
same line as a fax machine. The faxmodem will receive faxes, transcoding 
them into pdf format for storage. The outbound fax duties will be 
handled by a fax modem. At the moment I'm having a problem getting 
hylafax to receive.

My setup:

     FreeBSD 6.2-STABLE
     hylafax 4.3.4 from ports
     libtiff v3.8.2 from ports

     Intel Satisfaxtion Modem/400e Firmware: U10,U20-28F001BX-5.04

The problem. When sending a fax from my Fax machine, an HP 3050 All in 
one. The modems seem to connect but than fail before training. Here's a 
session log from /var/spool/hylafax/log/c...:

Oct 01 14:44:56.04: [66485]: SESSION BEGIN 000000015 12038740018
Oct 01 14:44:56.04: [66485]: HylaFAX (tm) Version 4.3.2
Oct 01 14:44:56.04: [66485]: <-- [13:AT+FCLASS=1A\r]
Oct 01 14:45:02.34: [66485]: --> [7:CONNECT]
Oct 01 14:45:02.34: [66485]: ANSWER: FAX CONNECTION  DEVICE '/dev/cuad0'
Oct 01 14:45:02.34: [66485]: RECV FAX: begin
Oct 01 14:45:02.34: [66485]: <-- data [32]
Oct 01 14:45:02.34: [66485]: <-- data [2]
Oct 01 14:45:04.26: [66485]: --> [7:CONNECT]
Oct 01 14:45:04.26: [66485]: <-- data [23]
Oct 01 14:45:04.26: [66485]: <-- data [2]
Oct 01 14:45:04.97: [66485]: --> [7:CONNECT]
Oct 01 14:45:04.97: [66485]: <-- data [13]
Oct 01 14:45:04.97: [66485]: <-- data [2]
Oct 01 14:45:05.51: [66485]: --> [2:OK]
Oct 01 14:45:05.51: [66485]: <-- [9:AT+FRH=3\r]
Oct 01 14:45:07.03: [66485]: --> [7:CONNECT]
Oct 01 14:45:08.05: [66485]: --> [2:OK]
Oct 01 14:45:08.05: [66485]: REMOTE TSI "2038740018"
Oct 01 14:45:08.05: [66485]: <-- [9:AT+FRH=3\r]
Oct 01 14:45:08.10: [66485]: --> [7:CONNECT]
Oct 01 14:45:08.47: [66485]: --> [2:OK]
Oct 01 14:45:08.47: [66485]: REMOTE wants 9600 bit/s
Oct 01 14:45:08.47: [66485]: REMOTE wants A4 page width (215 mm)
Oct 01 14:45:08.47: [66485]: REMOTE wants unlimited page length
Oct 01 14:45:08.47: [66485]: REMOTE wants 7.7 line/mm
Oct 01 14:45:08.47: [66485]: REMOTE wants 2-D MMR
Oct 01 14:45:08.47: [66485]: REMOTE wants T.30 Annex A, 256-byte ECM
Oct 01 14:45:08.47: [66485]: RECV training at v.29 9600 bit/s
Oct 01 14:45:08.47: [66485]: <-- [10:AT+FRM=96\r]
Oct 01 14:45:12.97: [66485]: --> [0:]
Oct 01 14:45:12.97: [66485]: MODEM <Empty line>
Oct 01 14:45:12.97: [66485]: <-- data [1]
Oct 01 14:45:12.99: [66485]: --> [2:OK]
Oct 01 14:45:12.99: [66485]: <-- [9:AT+FRS=7\r]
Oct 01 14:45:42.98: [66485]: MODEM <Timeout>
Oct 01 14:45:42.98: [66485]: <-- [9:AT+FRH=3\r]
Oct 01 14:45:49.98: [66485]: --> [0:]
Oct 01 14:45:49.98: [66485]: MODEM <Empty line>
Oct 01 14:45:49.98: [66485]: <-- data [1]
Oct 01 14:45:50.18: [66485]: MODEM <Timeout>
Oct 01 14:45:50.18: [66485]: RECV FAX: Failure to train modems
Oct 01 14:45:50.19: [66485]: RECV FAX: end
Oct 01 14:45:50.19: [66485]: <-- [14:ATH+FCLASS=0A\r]
Oct 01 14:48:50.16: [66485]: ANSWER: Ring detected without successful 
handshake
Oct 01 14:48:50.16: [66485]: SESSION END

I had this hardware working in the past. I cannot remember precisely 
when I shut it down but it was probably in 2000 or 2001. Any help would 
be appreciated.

Thanks
-- Chris Hilton

--
      __o          "All I was doing was trying to get home from work."
    _`\<,_           -Rosa Parks
___(*)/_(*)___________________________________________________________
Christopher Sean Hilton                    <chris | at | vindaloo.com>
        pgp key: D0957A2D/f5 30 0a e1 55 76 9b 1f 47 0b 07 e9 75 0e 14


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*