[hylafax-users] Failure to receive silence

["Fabiano (BiGu)" <bigu@xxxxxxxxxxxxxxxxxxxx>]

Hey guys, I trying to use a VoIP Line to transmit fax, its enabled t.38 
support ...

Im using hylafax with iaxmodem...I got this error on hylafax

Sep 18 14:35:30.33: [24385]: SESSION BEGIN 000000377 +9935231238
Sep 18 14:35:30.33: [24385]: HylaFAX (tm) Version 5.1.7
Sep 18 14:35:30.33: [24385]: SEND FAX: JOB 115 DEST 09935231238 COMMID 
000000377 DEVICE '/dev/ttyIAX0' FROM 'fax 
<fabiano@xxxxxxxxxxxxxxxxxxxx>' USER fax
Sep 18 14:35:30.33: [24385]: <-- [12:AT+FCLASS=1\r]
Sep 18 14:35:30.33: [24385]: --> [2:OK]
Sep 18 14:35:30.33: [24385]: DIAL 09935231238
Sep 18 14:35:30.33: [24385]: <-- [16:ATDT09935231238\r]
Sep 18 14:35:46.41: [24385]: --> [7:CONNECT]
Sep 18 14:35:56.41: [24385]: <-- data [1]
Sep 18 14:35:56.43: [24385]: --> [2:OK]
Sep 18 14:35:56.43: [24385]: <-- [9:AT+FRS=7\r]
Sep 18 14:36:26.43: [24385]: MODEM <Timeout>
Sep 18 14:36:26.43: [24385]: Failure to receive silence (synchronization 
failure). {E100}
Sep 18 14:36:26.43: [24385]: <-- data [1]
Sep 18 14:36:26.44: [24385]: --> [2:OK]
Sep 18 14:36:26.44: [24385]: <-- [9:AT+FRH=3\r]
Sep 18 14:36:47.43: [24385]: --> [10:NO CARRIER]
Sep 18 14:36:47.43: [24385]: MODEM No carrier
Sep 18 14:36:47.43: [24385]: <-- [9:AT+FRS=7\r]
Sep 18 14:36:47.43: [24385]: --> [5:ERROR]
Sep 18 14:36:47.43: [24385]: MODEM Command error
Sep 18 14:36:47.43: [24385]: Failure to receive silence (synchronization 
failure). {E100}
Sep 18 14:36:47.43: [24385]: <-- [9:AT+FRH=3\r]
Sep 18 14:36:47.43: [24385]: --> [5:ERROR]
Sep 18 14:36:47.43: [24385]: MODEM Command error
Sep 18 14:36:47.43: [24385]: No receiver protocol (T.30 T1 timeout) {E126}
Sep 18 14:36:47.43: [24385]: SEND FAILED: JOB 115 DEST 09935231238 ERR 
No receiver protocol (T.30 T1 timeout) {E126}
Sep 18 14:36:47.43: [24385]: <-- [9:AT+FRS=7\r]
Sep 18 14:36:47.43: [24385]: --> [5:ERROR]
Sep 18 14:36:47.43: [24385]: MODEM Command error
Sep 18 14:36:47.43: [24385]: Failure to receive silence (synchronization 
failure). {E100}
Sep 18 14:36:47.43: [24385]: <-- [9:AT+FTH=3\r]
Sep 18 14:36:47.43: [24385]: --> [5:ERROR]
Sep 18 14:36:48.44: [24385]: <-- [5:ATH0\r]
Sep 18 14:36:48.54: [24385]: --> [2:OK]
Sep 18 14:36:48.54: [24385]: SESSION END


I believe is problem about voip, its necessary to enable something on 
hylafax to support this?

Thanks


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*