 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Error sending fax...
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] Error sending fax...
- From: Fabiano Heringer <fabiano@xxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 14 Sep 2007 15:38:11 -0300
Hey guys, I´m getting trouble when I try to send faxes, here´s the log of session, I believe that start sends, but no complete with success...
I think the error is bad line, but I tried a call and no noise in line...
Sep 14 15:30:55.92: [ 6461]: SESSION BEGIN 000000301 +6133654709
Sep 14 15:30:55.92: [ 6461]: HylaFAX (tm) Version 5.1.7
Sep 14 15:30:55.92: [ 6461]: SEND FAX: JOB 101 DEST 06133654709 COMMID 000000301 DEVICE '/dev/ttyIAX0' FROM 'fax <felipe@xxxxxxxxxxxxxxxxxxxx>' USER fax
Sep 14 15:30:55.92: [ 6461]: <-- [12:AT+FCLASS=1\r]
Sep 14 15:30:55.92: [ 6461]: --> [2:OK]
Sep 14 15:30:55.94: [ 6461]: DIAL 06133654709
Sep 14 15:30:55.94: [ 6461]: <-- [16:ATDT06133654709\r]
Sep 14 15:31:08.31: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:10.29: [ 6461]: --> [2:OK]
Sep 14 15:31:10.29: [ 6461]: REMOTE NSF "00 00 31 00 CE B8 80 80 11 85 0D DD 00 00 DD DD 00 00 DD DD 00 00 00 00 00 00 00 00 ED 22 B0 00 00 90 00"
Sep 14 15:31:10.29: [ 6461]: NSF remote fax equipment: Sharp/Olivetti Sharp UX-460
Sep 14 15:31:10.29: [ 6461]: <-- [9:AT+FRH=3\r]
Sep 14 15:31:10.31: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:11.01: [ 6461]: --> [2:OK]
Sep 14 15:31:11.01: [ 6461]: REMOTE CSI "61 3651200"
Sep 14 15:31:11.01: [ 6461]: <-- [9:AT+FRH=3\r]
Sep 14 15:31:11.03: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:11.41: [ 6461]: --> [2:OK]
Sep 14 15:31:11.41: [ 6461]: REMOTE best rate 9600 bit/s
Sep 14 15:31:11.41: [ 6461]: REMOTE max A4 page width (215 mm)
Sep 14 15:31:11.41: [ 6461]: REMOTE max unlimited page length
Sep 14 15:31:11.41: [ 6461]: REMOTE best vres 15.4 line/mm
Sep 14 15:31:11.41: [ 6461]: REMOTE format support: MH, MR
Sep 14 15:31:11.41: [ 6461]: REMOTE best 20 ms, 10 ms/scanline
Sep 14 15:31:11.41: [ 6461]: USE 9600 bit/s
Sep 14 15:31:11.41: [ 6461]: SEND file "docq/doc134.ps;c1"
Sep 14 15:31:11.42: [ 6461]: USE A4 page width (215 mm)
Sep 14 15:31:11.42: [ 6461]: USE unlimited page length
Sep 14 15:31:11.43: [ 6461]: USE 7.7 line/mm
Sep 14 15:31:11.43: [ 6461]: USE 2-D MR
Sep 14 15:31:11.43: [ 6461]: USE 10 ms/scanline
Sep 14 15:31:11.43: [ 6461]: SEND training at v.29 9600 bit/s
Sep 14 15:31:11.43: [ 6461]: <-- [9:AT+FRS=7\r]
Sep 14 15:31:11.47: [ 6461]: --> [2:OK]
Sep 14 15:31:11.47: [ 6461]: <-- [9:AT+FTH=3\r]
Sep 14 15:31:11.48: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:11.48: [ 6461]: <-- data [23]
Sep 14 15:31:11.48: [ 6461]: <-- data [2]
Sep 14 15:31:13.02: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:13.02: [ 6461]: <-- data [6]
Sep 14 15:31:13.02: [ 6461]: <-- data [2]
Sep 14 15:31:13.38: [ 6461]: --> [2:OK]
Sep 14 15:31:13.38: [ 6461]: <-- [9:AT+FTS=7\r]
Sep 14 15:31:13.46: [ 6461]: --> [2:OK]
Sep 14 15:31:13.46: [ 6461]: <-- [10:AT+FTM=96\r]
Sep 14 15:31:13.47: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:13.47: [ 6461]: DELAY 400 ms
Sep 14 15:31:13.87: [ 6461]: <-- data [1024]
Sep 14 15:31:13.87: [ 6461]: <-- data [776]
Sep 14 15:31:13.87: [ 6461]: <-- data [2]
Sep 14 15:31:15.40: [ 6461]: --> [2:OK]
Sep 14 15:31:15.40: [ 6461]: <-- [9:AT+FRH=3\r]
Sep 14 15:31:15.83: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:16.93: [ 6461]: --> [2:OK]
Sep 14 15:31:16.93: [ 6461]: TRAINING succeeded
Sep 14 15:31:16.93: [ 6461]: <-- [9:AT+FRS=7\r]
Sep 14 15:31:16.99: [ 6461]: --> [2:OK]
Sep 14 15:31:16.99: [ 6461]: <-- [10:AT+FTM=96\r]
Sep 14 15:31:17.00: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:17.00: [ 6461]: DELAY 400 ms
Sep 14 15:31:17.40: [ 6461]: SEND begin page
Sep 14 15:31:17.42: [ 6461]: Reading MMR-compressed image file
Sep 14 15:31:17.44: [ 6461]: <-- data [1026]
Sep 14 15:31:17.44: [ 6461]: <-- data [1026]
Sep 14 15:31:17.44: [ 6461]: <-- data [1024]
Sep 14 15:31:17.44: [ 6461]: <-- data [1024]
Sep 14 15:31:18.30: [ 6461]: <-- data [1032]
Sep 14 15:31:18.30: [ 6461]: <-- data [1027]
Sep 14 15:31:18.30: [ 6461]: <-- data [1024]
Sep 14 15:31:18.30: [ 6461]: <-- data [1025]
Sep 14 15:31:21.74: [ 6461]: <-- data [1026]
Sep 14 15:31:21.74: [ 6461]: <-- data [1032]
Sep 14 15:31:21.74: [ 6461]: <-- data [1038]
Sep 14 15:31:21.74: [ 6461]: <-- data [1030]
Sep 14 15:31:25.18: [ 6461]: <-- data [1030]
Sep 14 15:31:25.18: [ 6461]: <-- data [1029]
Sep 14 15:31:25.18: [ 6461]: <-- data [1028]
Sep 14 15:31:25.18: [ 6461]: <-- data [1029]
Sep 14 15:31:28.62: [ 6461]: <-- data [1030]
Sep 14 15:31:28.62: [ 6461]: <-- data [1030]
Sep 14 15:31:28.62: [ 6461]: <-- data [1036]
Sep 14 15:31:28.62: [ 6461]: <-- data [1027]
Sep 14 15:31:32.06: [ 6461]: <-- data [1029]
Sep 14 15:31:32.06: [ 6461]: <-- data [1027]
Sep 14 15:31:32.06: [ 6461]: <-- data [1026]
Sep 14 15:31:32.06: [ 6461]: <-- data [1032]
Sep 14 15:31:35.50: [ 6461]: <-- data [1030]
Sep 14 15:31:35.50: [ 6461]: <-- data [1028]
Sep 14 15:31:35.50: [ 6461]: <-- data [869]
Sep 14 15:31:35.50: [ 6461]: SENT 27489 bytes of data
Sep 14 15:31:35.50: [ 6461]: <-- data [1029]
Sep 14 15:31:35.50: [ 6461]: <-- data [1029]
Sep 14 15:31:38.94: [ 6461]: <-- data [1027]
Sep 14 15:31:38.94: [ 6461]: <-- data [1030]
Sep 14 15:31:38.94: [ 6461]: <-- data [1030]
Sep 14 15:31:38.94: [ 6461]: <-- data [1026]
Sep 14 15:31:42.38: [ 6461]: <-- data [1025]
Sep 14 15:31:42.38: [ 6461]: <-- data [1027]
Sep 14 15:31:42.38: [ 6461]: <-- data [1032]
Sep 14 15:31:45.82: [ 6461]: <-- data [1031]
Sep 14 15:31:45.82: [ 6461]: <-- data [1032]
Sep 14 15:31:45.82: [ 6461]: <-- data [1027]
Sep 14 15:31:45.82: [ 6461]: <-- data [1024]
Sep 14 15:31:49.26: [ 6461]: <-- data [1024]
Sep 14 15:31:49.26: [ 6461]: <-- data [1024]
Sep 14 15:31:49.26: [ 6461]: <-- data [604]
Sep 14 15:31:49.26: [ 6461]: SENT 15964 bytes of data
Sep 14 15:31:49.26: [ 6461]: SEND 2D RTC
Sep 14 15:31:49.26: [ 6461]: <-- data [30]
Sep 14 15:31:49.26: [ 6461]: <-- data [2]
Sep 14 15:31:49.26: [ 6461]: SEND end page
Sep 14 15:31:53.72: [ 6461]: --> [2:OK]
Sep 14 15:31:53.72: [ 6461]: <-- [9:AT+FTS=9\r]
Sep 14 15:31:53.82: [ 6461]: --> [2:OK]
Sep 14 15:31:53.82: [ 6461]: SEND send EOP (no more pages or documents)
Sep 14 15:31:53.82: [ 6461]: <-- [9:AT+FTH=3\r]
Sep 14 15:31:53.83: [ 6461]: --> [7:CONNECT]
Sep 14 15:31:53.83: [ 6461]: <-- data [3]
Sep 14 15:31:53.83: [ 6461]: <-- data [2]
Sep 14 15:31:54.90: [ 6461]: --> [2:OK]
Sep 14 15:31:54.90: [ 6461]: <-- [9:AT+FRH=3\r]
Sep 14 15:32:12.45: [ 6461]: --> [10:NO CARRIER]
Sep 14 15:32:12.45: [ 6461]: MODEM No carrier
Sep 14 15:32:12.45: [ 6461]: SEND send EOP (no more pages or documents)
Sep 14 15:32:12.45: [ 6461]: <-- [9:AT+FTH=3\r]
Sep 14 15:32:12.45: [ 6461]: --> [5:ERROR]
Sep 14 15:32:12.45: [ 6461]: SEND send EOP (no more pages or documents)
Sep 14 15:32:12.45: [ 6461]: <-- [9:AT+FTH=3\r]
Sep 14 15:32:12.45: [ 6461]: --> [5:ERROR]
Sep 14 15:32:12.45: [ 6461]: No response to EOP repeated 3 tries {E151}
Sep 14 15:32:12.45: [ 6461]: <-- [9:AT+FRS=7\r]
Sep 14 15:32:12.45: [ 6461]: --> [5:ERROR]
Sep 14 15:32:12.45: [ 6461]: MODEM Command error
Sep 14 15:32:12.45: [ 6461]: Failure to receive silence (synchronization failure). {E100}
Sep 14 15:32:12.45: [ 6461]: <-- [9:AT+FTH=3\r]
Sep 14 15:32:12.45: [ 6461]: --> [5:ERROR]
Sep 14 15:32:13.46: [ 6461]: <-- [5:ATH0\r]
Sep 14 15:32:13.56: [ 6461]: --> [2:OK]
Sep 14 15:32:13.56: [ 6461]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Error sending fax...
- From: Lee Howard
- Re: [hylafax-users] Error sending fax...
- Prev by Date: Re: [hylafax-users] Anyway to control the order that faxstat lists them modems?
- Next by Date: [hylafax-users] Error sending fax...
- Previous by thread: Re: [hylafax-users] Hylafax heartbeat iaxmodem
- Next by thread: Re: [hylafax-users] Error sending fax...
- Index(es):
Project hosted by iFAX Solutions