Re: [hylafax-users] Failed faxes when using class 1.0 on mainpine

["Darren Nickerson" <darren.nickerson@xxxxxxxx>]



I suggest you upgrade to HylaFAX 4.3.4 (or 4.4.0 beta 1) - there's been some work on V.34 since the 4.3.0 release you're running. If you can reproduce the problems, send logs.

 

-Darren

 

----- Original Message -----

From: John Warren

To: Hylafax Mailling List

Sent: Wednesday, June 20, 2007 5:04 PM

Subject: [hylafax-users] Failed faxes when using class 1.0 on mainpine

For the last couple of months I've been running our systems with the modem set to class 1.0. I like the faster speeds but I've been getting a fair number of failures that I don't see when running class 1.�

There seems to be a number of fax machines that don't like receiving from us when running class 1.�

I've also see problems where others can't send to us but we can send to them, again this only happens when running class 1.0.�

If I set sendfax to use 9600 bps for the one job the fax will still fail.�

Only changing to class 1 seems to fix the problem.

At the end of this message I've included parts of the transactions for one site I've had real problems with. Fax number change to be non-readable.

So, anyone have any ideas? I've just about run out of options.

John Warren

Network Operations Administrator
Prudent Rx Inc.
100 Corporate Pointe, Suite 395
Culver City, CA 90230

( +1.310.642.1700 x121
+1.310.642-1701
E: jwarren@xxxxxxxxxxxxx

**Notice of Confidentiality**

Please note that the information contained in this message may be privileged and confidential and protected from disclosure under the law, including the Health Insurance Portability and Accountability Act (HIPAA). If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited and may subject you to criminal or civil penalties. If you have received this communication in error, please notify the sender by replying to the message and delete the material from any computer.

Thank you,

Prudent Rx, Inc.�

The modem is a "Mainpine Venus V.92 I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury".

------------ When running as class 1.0 -----------

Jun 19 14:31:10.46: [25590]: SESSION BEGIN 000086909 1317357....

Jun 19 14:31:10.46: [25590]: HylaFAX (tm) Version 4.3.0

Jun 19 14:31:10.46: [25590]: SEND FAX: JOB 3639 DEST 1317357.... COMMID 000086909 DEVICE '/dev/ttyS6' FROM '.... <....@xxxxxxxxxxxxx>' USER root

Jun 19 14:31:10.46: [25590]: <-- [14:AT+FCLASS=1.0\r]

Jun 19 14:31:10.47: [25590]: --> [2:OK]

Jun 19 14:31:10.47: [25590]: DIAL 1317357....

Jun 19 14:31:10.47: [25590]: <-- [16:ATDT1317357....\r]

Jun 19 14:31:23.78: [25590]: --> [2:OK]

Jun 19 14:31:23.78: [25590]: SEND FAILED: JOB 3639 DEST 1317357.... ERR No carrier detected

Jun 19 14:31:23.78: [25590]: SEND FAILED: JOB 3639 DEST 1317357.... ERR No carrier detected; too many attempts to dial

Jun 19 14:31:23.78: [25590]: <-- [5:ATH0\r]

Jun 19 14:31:23.83: [25590]: --> [2:OK]

Jun 19 14:31:23.83: [25590]: SESSION END

------------ When running as class 1 -------------

Jun 20 13:06:30.09: [11332]: SESSION BEGIN 000087187 1317357....

Jun 20 13:06:30.11: [11332]: HylaFAX (tm) Version 4.3.0

Jun 20 13:06:30.11: [11332]: SEND FAX: JOB 3679 DEST 1317357.... COMMID 000087187 DEVICE '/dev/ttyS10' FROM '..... <.....@xxxxxxxxxxxxx>' USER root

Jun 20 13:06:30.11: [11332]: <-- [12:AT+FCLASS=1\r]

Jun 20 13:06:30.12: [11332]: --> [2:OK]

Jun 20 13:06:30.12: [11332]: DIAL 1317357....

Jun 20 13:06:30.12: [11332]: <-- [16:ATDT1317357....\r]

Jun 20 13:06:44.42: [11332]: --> [7:CONNECT]

Jun 20 13:06:46.52: [11332]: --> [2:OK]

Jun 20 13:06:46.52: [11332]: REMOTE NSF "00 00 31 20 EE B8 C4 80 81 80 80 80 20 84 0D DD 00 00 DD DD 00 00 DD DD DD DD DD 00 ED 21 B0 00 00 34"

Jun 20 13:06:46.52: [11332]: NSF remote fax equipment: Sharp/Olivetti

Jun 20 13:06:46.52: [11332]: <-- [9:AT+FRH=3\r]

Jun 20 13:06:46.53: [11332]: --> [7:CONNECT]

Jun 20 13:06:47.22: [11332]: --> [2:OK]

Jun 20 13:06:47.22: [11332]: REMOTE CSI "317357...."

Jun 20 13:06:47.22: [11332]: <-- [9:AT+FRH=3\r]

Jun 20 13:06:47.23: [11332]: --> [7:CONNECT]

Jun 20 13:06:47.66: [11332]: --> [2:OK]

Jun 20 13:06:47.66: [11332]: REMOTE best rate 33600 bit/s

Jun 20 13:06:47.66: [11332]: REMOTE max A4 page width (215 mm)

Jun 20 13:06:47.66: [11332]: REMOTE max unlimited page length

Jun 20 13:06:47.66: [11332]: REMOTE best vres 7.7 line/mm

Jun 20 13:06:47.66: [11332]: REMOTE format support: MH, MR, MMR, JBIG

Jun 20 13:06:47.66: [11332]: REMOTE supports T.30 Annex A, 256-byte ECM

Jun 20 13:06:47.66: [11332]: REMOTE best 20 ms, 10 ms/scanline

Jun 20 13:06:47.66: [11332]: USE 9600 bit/s

Jun 20 13:06:47.66: [11332]: SEND file "docq/doc6316.pdf;71"

Jun 20 13:06:47.66: [11332]: USE A4 page width (215 mm)

Jun 20 13:06:47.66: [11332]: USE unlimited page length

Jun 20 13:06:47.66: [11332]: USE 7.7 line/mm

Jun 20 13:06:47.66: [11332]: USE 2-D MR

Jun 20 13:06:47.66: [11332]: USE 10 ms/scanline

Jun 20 13:06:47.66: [11332]: SEND training at v.29 9600 bit/s