Re: [hylafax-users] Web Authorization Code (Re-mail)

["Dinesh Durai" <ddurai@xxxxxxxxx>]

HI,

 

I want to get calling number  & name in my log.

 

Following are my configurations:

 

CountryCode:            1
AreaCode:               952
FAXNumber:              +1.952.828.9867
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        /etc/dialrules
ServerTracing:          0xFFF
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      2
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Pet Partners Inc - Linux version Testing"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
QualifyCID:             /var/spool/hylafax
#QualifyTSI:            /var/spool/hylafax
MaxRecvPages:           100
LockDataCalls:          yes
LockVoiceCalls:         yes
 

 

ModemType:              Class2          # use class 2 interface
ModemRate:              38400           # lock rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemHardFlowCmd:       AT&E4           # hardware flow control
ModemSoftFlowCmd:       AT&E5           # software flow control
ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)
# The MT2834ZDX (and other newer models) may be more robust with this.
#ModemSetupDCDCmd:      AT&C4           # setup so DCD resets modem on
#                                       # carrier drop
#
ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
#
# NB: some models get confused by @ in ModemDialCmd
# NB: the @ causes some multifunction fax units to not go into fax mode.
#
ModemDialCmd:           ATDT%s          # T for tone dialing
#
Class2RecvDataTrigger:  "\022"          # character sent to modem to start recv
#
# The MT2834ZDX (and other newer models) can take advantage of these.
#Class2APQueryCmd:      AT              # AT+FAP=? not supported on this modem
#Class2NFLOCmd:         AT+FLO=0        # Class 2: no flow control
#Class2SFLOCmd:         AT+FLO=1        # Class 2: software flow control
#Class2HFLOCmd:         AT+FLO=2        # Class 2: hardware flow control
#Class2XmitWaitForXON:  no

# Called id Changes DINESH
#ModemResetCmds: AT+VCID=1
CallIDPattern: "NMBR = "
CallIDPattern: "NAME = "

 

 

Can anybody help me on this.

 

Cheers

Dinesh D