[hylafax-users] Problem in traing remote modem

[dario busso <dario.busso@xxxxxxxxxxxx>]

Hi, I've the following trace for an attempt of faxing to a Brother
FaxMachine.
My modem is a Multitech  MT5634ZPX-PCI-U.
Here's the trace:

Apr 10 10:40:45.75: [ 6837]: SESSION BEGIN 000004262 3930xxxxxxx
Apr 10 10:40:45.75: [ 6837]: HylaFAX (tm) Version 4.3.0
Apr 10 10:40:45.75: [ 6837]: SEND FAX: JOB 1284 DEST 030xxxxxxx COMMID
000004262 DEVICE '/dev/ttyS1' FROM 'MARCO <marco@xxxxxxx>' USER fax
Apr 10 10:40:45.75: [ 6837]: <-- [12:AT+FCLASS=1\r]
Apr 10 10:40:45.77: [ 6837]: --> [2:OK]
Apr 10 10:40:45.77: [ 6837]: DIAL 030xxxxxxx
Apr 10 10:40:45.77: [ 6837]: <-- [15:ATDT0303761138\r]
Apr 10 10:41:01.20: [ 6837]: --> [7:CONNECT]
Apr 10 10:41:02.66: [ 6837]: --> [2:OK]
Apr 10 10:41:02.66: [ 6837]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 FB 00"
Apr 10 10:41:02.66: [ 6837]: NSF remote fax equipment: Brother
MFC-3100C/MFC-8600
Apr 10 10:41:02.66: [ 6837]: <-- [9:AT+FRH=3\r]
Apr 10 10:41:02.68: [ 6837]: --> [7:CONNECT]
Apr 10 10:41:03.36: [ 6837]: --> [2:OK]
Apr 10 10:41:03.36: [ 6837]: REMOTE CSI "0303761138"
Apr 10 10:41:03.36: [ 6837]: <-- [9:AT+FRH=3\r]
Apr 10 10:41:03.38: [ 6837]: --> [7:CONNECT]
Apr 10 10:41:03.69: [ 6837]: --> [2:OK]
Apr 10 10:41:03.69: [ 6837]: REMOTE best rate 14400 bit/s
Apr 10 10:41:03.69: [ 6837]: REMOTE max A4 page width (215 mm)
Apr 10 10:41:03.69: [ 6837]: REMOTE max unlimited page length
Apr 10 10:41:03.69: [ 6837]: REMOTE best vres 15.4 line/mm
Apr 10 10:41:03.69: [ 6837]: REMOTE format support: MH, MR, MMR
Apr 10 10:41:03.69: [ 6837]: REMOTE supports T.30 Annex A, 256-byte ECM
Apr 10 10:41:03.69: [ 6837]: REMOTE best 10 ms/scanline
Apr 10 10:41:03.69: [ 6837]: USE 14400 bit/s
Apr 10 10:41:03.69: [ 6837]: USE error correction mode
Apr 10 10:41:03.69: [ 6837]: SEND file "docq/doc1284.ps;c0"
Apr 10 10:41:03.69: [ 6837]: USE A4 page width (215 mm)
Apr 10 10:41:03.69: [ 6837]: USE unlimited page length
Apr 10 10:41:03.69: [ 6837]: USE 3.85 line/mm
Apr 10 10:41:03.69: [ 6837]: USE 2-D MMR
Apr 10 10:41:03.69: [ 6837]: USE 0 ms/scanline
Apr 10 10:41:03.69: [ 6837]: SEND training at v.17 14400 bit/s
Apr 10 10:41:03.69: [ 6837]: <-- [9:AT+FRS=7\r]
Apr 10 10:41:03.87: [ 6837]: --> [2:OK]
Apr 10 10:41:03.87: [ 6837]: <-- [9:AT+FTH=3\r]
Apr 10 10:41:04.84: [ 6837]: --> [7:CONNECT]
Apr 10 10:41:04.84: [ 6837]: <-- data [23]
Apr 10 10:41:04.84: [ 6837]: <-- data [2]
Apr 10 10:41:04.86: [ 6837]: --> [7:CONNECT]
Apr 10 10:41:04.86: [ 6837]: <-- data [7]
Apr 10 10:41:04.86: [ 6837]: <-- data [2]
Apr 10 10:41:06.04: [ 6837]: --> [2:OK]
Apr 10 10:41:06.04: [ 6837]: <-- [9:AT+FTS=7\r]
Apr 10 10:41:06.11: [ 6837]: --> [2:OK]
Apr 10 10:41:06.11: [ 6837]: <-- [11:AT+FTM=145\r]
Apr 10 10:41:06.13: [ 6837]: --> [7:CONNECT]
Apr 10 10:41:06.13: [ 6837]: DELAY 400 ms
Apr 10 10:41:06.53: [ 6837]: <-- data [1024]
Apr 10 10:41:06.53: [ 6837]: <-- data [1024]
Apr 10 10:41:06.53: [ 6837]: <-- data [652]
Apr 10 10:41:06.53: [ 6837]: <-- data [2]
Apr 10 10:41:13.96: [ 6837]: --> [5:ERROR]
Apr 10 10:41:13.96: [ 6837]: MODEM Command error
Apr 10 10:42:13.97: [ 6837]: MODEM <Timeout>

Any one can help me to solve this "Failure to train remote modem" error?
Thanks in advance.

-- 
Dario Busso
------------------------
DueDelta
via san Biagio, 2
12030 Caramagna Piemonte (CN)

Tel: +39 0172 1961277
Mob: +39 339 5956334
Email: dario.busso@xxxxxxxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*