Re: [hylafax-users] Single Canon 2060 fax machine COMREC DCN-ing

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Alternative Diasporas wrote:

> Feb 20 19:02:21.87: [ 2170]: SEND send PPS (partial page signal)
> Feb 20 19:02:21.87: [ 2170]: SEND send EOP (no more pages or documents)
> Feb 20 19:02:21.87: [ 2170]: <-- [9:AT+FRH=3\r]
> Feb 20 19:02:22.35: [ 2170]: --> [7:CONNECT]
> Feb 20 19:02:23.21: [ 2170]: --> [2:OK]
> Feb 20 19:02:23.21: [ 2170]: SEND recv DCN (disconnect)
> Feb 20 19:02:23.21: [ 2170]: DELAY 70 ms
> Feb 20 19:02:23.28: [ 2170]: COMREC invalid response received to PPS.
>  

Most Phase D COMREC-DCN situations occur when...

1) the Phase C image data being sent does not agree with what the 
receiver understood from our DCS signal

2) the receiver is unwilling to tolerate some other kind of error in the 
Phase C image data

3) the receiver is unwilling to tolerate the modulation that the modem's 
DSP is using

You're using 4.2.5.  Before you go too far I would recommend "upgrading" 
(and I quote that word as some here will undoubtedly challenge me on 
that usage) to HylaFAX+ 5.0.4 (http://hylafax.sourceforge.net).  Or at 
least testing with another machine using that same modem and that 
version of HylaFAX+.  If you can't do that then please let me know if I 
can send a few test faxes to that number.  (You'll need to privately 
give me the fax number.)

If I can reproduce the error here with my modems - or if you can 
reproduce the error there with 5.0.4 - then it's much more likely a bona 
fide bug on HylaFAX's part.

It's possible that the problem is really with the modem - albeit a 
slight possibility only.  You may want to try some other Class 1 modem.  
USR modems are always suspect in my book.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*