Re: [hylafax-users] Receive Fax Orientation

[koyama <mlus@xxxxxxxxxxxx>]

Thank you for reply.

>> When I send fax (ISO A4 size portrait), hylafax receive it,
>> but output TIFF file is ISO A4 size landscape.
>>
>> I want to output "ISO A4 size portrait".
>> How do I get TIFF image (ISO A4 size portraint) ?
>>
> 
> Fax protocol is always in portrait mode. Now sometimes it may happen
> that a sender will rotate and reduce a page unintentionally, but that's
> fairly rare.
> 
> How are you sending the fax? How are you viewing the received fax?


I send fax portrait (ISO A4 size) from three fax machine.
Hylafax output (ISO A4 landscapde size) tiff image from Two fax machene.
Hylafax output (ISO A4 large portrait size ) tiff image from only one
fax machine.

I thought all tiff images was expanded.
I viewed tiff image by  Gwenview in OpenSUSE10.2.


My hylafax setup was wrong ?(XX is mask)

===============================================================
etc/setup.cache
===============================================================
AWK='/usr/bin/gawk'
BIN='/usr/bin'
CAT='/bin/cat'
CHARSET='ANSI_X3.4-1968'
CHGRP='/bin/chgrp'
CHMOD='/bin/chmod'
CHOWN='/bin/chown'
CP='/bin/cp'
DPSRIP='/usr/local/sbin/ps2fax.exe'
ECHO='/bin/echo'
ENCODING='base64'
FAXQ_SERVER='yes'
FONTPATH='/usr/share/ghostscript/Resource:/usr/share/ghostscript/8.15/lib:/usr/share/ghostscript/8.15/Resource:/usr/share/ghostscript/fonts:/usr/share/fonts/truetype:/usr/share/fonts/Type1'
FUSER='/bin/fuser'
GREP='/bin/grep'
GSRIP='/usr/bin/gs'
HFAXD_OLD_PROTOCOL='no'
HFAXD_SERVER='yes'
HFAXD_SNPP_SERVER='no'
IMPRIP='/usr/lib/print/psrip'
LIBDATA='/usr/lib/fax'
LIBEXEC='/usr/lib/fax'
LN='/bin/ln'
MANDIR='/usr/share/man'
MIMENCODE='base64-encode'
MKFIFO='/usr/bin/mkfifo'
MV='/bin/mv'
PATH='/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin'
PATHEGETTY='/usr/sbin/egetty'
PATHGETTY='/usr/sbin/mgetty'
PATHVGETTY='/usr/sbin/vgetty'
PSPACKAGE='gs'
RM='/bin/rm'
SBIN='/usr/sbin'
SCRIPT_SH='/bin/sh'
SED='/bin/sed'
SENDMAIL='/usr/sbin/sendmail'
SPOOL='/var/spool/fax'
SYSVINIT=''
TARGET='i386-suse-linux-gnu'
TIFF2PDF='/usr/bin/tiff2pdf'
TIFFBIN='/usr/bin'
TTYCMD='/usr/bin/tty'
UUCP_LOCKDIR='/var/spool/locks'
UUCP_LOCKTYPE='ascii'
UUENCODE='/usr/bin/uuencode'






===============================================================
etc/config
===============================================================
LogFacility:		daemon
CountryCode:		XX
AreaCode:		XX
LongDistancePrefix:	0
InternationalPrefix:	001
DialStringRules:	"etc/dialrules"
ServerTracing:		1
SessionTracing:		0xffffffff


===============================================================
etc/config.ttySHSF0
===============================================================
CountryCode:		XX
AreaCode:		XX
FAXNumber:		"XX"
LongDistancePrefix:	0
InternationalPrefix:	001
DialStringRules:	"etc/dialrules"
ServerTracing:		1
SessionTracing:		0xffffffff
RecvFileMode:		0660
LogFileMode:		0660
DeviceMode:		0660
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#
ModemType:		Class1		# use this to supply a hint
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	rtscts		# default
#
ModemNoFlowCmd:		AT&K0		# setup no flow control
ModemHardFlowCmd:	AT&K3		# setup hardware flow control
ModemSoftFlowCmd:	AT&K4		# setup software flow control
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:	!Rockwell
ModemModelQueryCmd:	!RC288DPi
ModemRevQueryCmd:	ATI3		# product information
#
ModemDialCmd:		ATDT%s		# T for tone dialing


===============================================================
etc/config.ttySHSF1
===============================================================
CountryCode:		XX
AreaCode:		XX
FAXNumber:		"XXX"
LongDistancePrefix:	0
InternationalPrefix:	001
DialStringRules:	"etc/dialrules"
ServerTracing:		1
SessionTracing:		0xffffffff
RecvFileMode:		0660
LogFileMode:		0660
DeviceMode:		0660
RingsBeforeAnswer:	1
SpeakerVolume:		off
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
#
ModemType:		Class1		# use this to supply a hint
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	rtscts		# default
#
ModemNoFlowCmd:		AT&K0		# setup no flow control
ModemHardFlowCmd:	AT&K3		# setup hardware flow control
ModemSoftFlowCmd:	AT&K4		# setup software flow control
ModemSetupDTRCmd:	AT&D2		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:	!Rockwell
ModemModelQueryCmd:	!RC288DPi
ModemRevQueryCmd:	ATI3		# product information
#
ModemDialCmd:		ATDT%s		# T for tone dialing






____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*