HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Failure to transmit clean ECM image data.;
Michiel Kersjes wrote:
On an other server we have installed Asterisk with iaxmodem and
hylafax for receiving faxes.
Sometimes i get the next error "COMREC received DCN" when receiving a fax.
Jan 22 14:03:54.72: [25489]: <-- [9:AT+FRH=3\r]
Jan 22 14:03:55.04: [25489]: --> [7:CONNECT]
Jan 22 14:03:56.16: [25489]: --> HDLC<5:FF C8 F2 AC A0>
Jan 22 14:03:56.16: [25489]: --> [2:OK]
Jan 22 14:03:56.16: [25489]: RECV recv MPS (more pages, same document)
Jan 22 14:03:56.16: [25489]: <-- [9:AT+FRS=7\r]
Jan 22 14:03:56.26: [25489]: --> [2:OK]
Jan 22 14:03:56.26: [25489]: <-- [9:AT+FTH=3\r]
Jan 22 14:03:56.37: [25489]: --> [7:CONNECT]
Jan 22 14:03:56.37: [25489]: RECV send MCF (message confirmation)
Jan 22 14:03:56.38: [25489]: RECV FAX (000030694): from XXXXXXXXXX,
page 1 in 1:23, INF, 3.85 line/mm, 2-D MR, 9600 bit/s
Jan 22 14:03:56.38: [25489]: <-- HDLC<3:FF C8 31>
Jan 22 14:03:57.46: [25489]: --> [2:OK]
Jan 22 14:03:57.46: [25489]: <-- [10:AT+FRM=96\r]
Jan 22 14:04:00.68: [25489]: --> [6:+FRH:3]
Jan 22 14:04:00.68: [25489]: --> [7:CONNECT]
Jan 22 14:04:01.80: [25489]: --> HDLC<5:FF C8 DF 59 6F>
Jan 22 14:04:01.80: [25489]: --> [2:OK]
Jan 22 14:04:01.80: [25489]: RECV recv DCN (disconnect)
At 14:03:56.16 the sender apparently thought that it had more pages to
send after the first one. But then after we confirmed the receipt of
the first page the sender then sent an unexpected signal to disconnect
instead.
Your guess will be as good as any as to why it did that. The sender
would most certainly know.
My guess is that either the sender pushed "Stop" on the sending fax
machine or the fax machine wasn't able to feed page 2.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*