[hylafax-users] DID

[Bill Hults <lakely@xxxxxxxx>]

Hylafax 4.3.0 on FC4
I finally appear to have DID working. The caller ID appears in the syslog,
Jan 17 15:28:21 pdfax FaxGetty[7715]: ANSWER: Call ID 1 "2971"
Jan 17 15:28:31 pdfax FaxGetty[7715]: ANSWER: FAX CONNECTION  DEVICE 
'/dev/ttyS3'
...
Jan 17 15:30:12 pdfax FaxGetty[7715]: RECV FAX: bin/faxrcvd 
"recvq/fax000000064.tif" "ttyS3" "000000065" "" "2971"
Jan 17 15:30:21 pdfax FaxGetty[7715]: MODEM MAINPINE VENUS V.92 
I03.04.02 (0026SD) VOICE V2 V92CAP 12NS RAM MERCURY Mainpine Venus V.92 
I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury/
in the FaxMaster e-mail -

          Pages: 1
        Quality: Normal
           Size: North American Letter
       Received: 2007:01:17 15:29:55
Time To Receive: 1:37
    Signal Rate: 4800 bit/s
    Data Format: 2-D MMR
  Error Correct: Yes
        CallID1: 2971
    Received On: ttyS3
In the log -
Jan 17 15:28:21.78: [ 7715]: SESSION BEGIN 000000065 15104941199
Jan 17 15:28:21.78: [ 7715]: HylaFAX (tm) Version 4.3.0
Jan 17 15:28:21.78: [ 7715]: CallID: "2971"
Jan 17 15:28:21.78: [ 7715]: DELAY 1000 ms
Jan 17 15:28:22.78: [ 7715]: <-- [14:AT+FCLASS=1;A\r]
Jan 17 15:28:31.27: [ 7715]: --> [2:~]
Jan 17 15:28:31.27: [ 7715]: --> [7:CONNECT]
Jan 17 15:28:31.27: [ 7715]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS3'
Jan 17 15:28:31.27: [ 7715]: RECV FAX: begin
My problem is that routing isn't working (I can route via tty) -
In FaxDispatch I have case "$CALLID1" in
	2971)	SENDTO=gearge@xxxxxxxxxxxxx;;
esac
I've tried $CALLID2 & $CIDNUMBER all to no avail.
What am I missing?
TIA
Bill 
 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*