[hylafax-users] Can`t send fax - error code 428 (Check. Password)

[Jaroslaw Grzabel <thorvald@xxxxxxxxxx>]

Hello.
Everything works fine until now. When I try to send fax anywhere on external fax maschine I have got an error displayed "Check. Password 248".
What could be done ? This is my session log:

# cat c000000278
sty 12 10:21:27.39: [28588]: SESSION BEGIN 000000278 44
sty 12 10:21:27.39: [28588]: HylaFAX (tm) Version 4.3.0
sty 12 10:21:27.39: [28588]: SEND FAX: JOB 65 DEST 44 COMMID 000000278 DEVICE '/dev/ttyS0' FROM 'fax <email_address>' USER fax
sty 12 10:21:27.39: [28588]: STATE CHANGE: RUNNING -> SENDING
sty 12 10:21:27.39: [28588]: <-- [12:AT+FCLASS=1\r]
sty 12 10:21:27.41: [28588]: --> [2:OK]
sty 12 10:21:27.41: [28588]: DIAL 44
sty 12 10:21:27.41: [28588]: <-- [7:ATDT44\r]
sty 12 10:21:38.08: [28588]: --> [7:CONNECT]
sty 12 10:21:39.82: [28588]: --> HDLC<25:FF C0 04 00 00 9E 00 00 00 40 F0 90 48 00 08 A0 40 A9 13 11 01 01 80 A9 D5>
sty 12 10:21:39.82: [28588]: --> [2:OK]
sty 12 10:21:39.82: [28588]: REMOTE NSF "00 00 79 00 00 00 02 0F 09 12 00 10 05 02 95 C8 88 80 80 01"
sty 12 10:21:39.82: [28588]: NSF remote fax equipment: Panasonic UF-S10
sty 12 10:21:39.82: [28588]: <-- [9:AT+FRH=3\r]
sty 12 10:21:39.84: [28588]: --> [7:CONNECT]
sty 12 10:21:40.14: [28588]: --> HDLC<11:FF C8 01 00 72 1D 01 01 88 A9 FF>
sty 12 10:21:40.14: [28588]: --> [2:OK]
sty 12 10:21:40.14: [28588]: REMOTE best rate 9600 bit/s
sty 12 10:21:40.14: [28588]: REMOTE max A4 page width (215 mm)
sty 12 10:21:40.14: [28588]: REMOTE max unlimited page length
sty 12 10:21:40.14: [28588]: REMOTE best vres 15.4 line/mm
sty 12 10:21:40.14: [28588]: REMOTE format support: MH
sty 12 10:21:40.14: [28588]: REMOTE best 20 ms, 10 ms/scanline
sty 12 10:21:40.14: [28588]: USE 9600 bit/s
sty 12 10:21:40.14: [28588]: <-- [9:AT+FTH=3\r]
sty 12 10:21:41.01: [28588]: --> [7:CONNECT]
sty 12 10:21:41.01: [28588]: <-- HDLC<3:FF C8 DF>
sty 12 10:21:41.01: [28588]: <-- data [3]
sty 12 10:21:41.01: [28588]: <-- data [2]
sty 12 10:21:41.33: [28588]: --> [2:OK]
sty 12 10:21:41.33: [28588]: MODEM input buffering enabled
sty 12 10:21:41.33: [28588]: <-- [5:ATH0\r]
sty 12 10:21:41.65: [28588]: --> [2:OK]
sty 12 10:21:41.65: [28588]: MODEM set DTR OFF
sty 12 10:21:41.65: [28588]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
sty 12 10:21:41.65: [28588]: SESSION END

Thank You for help.
Best regards,
Jarek

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*