[hylafax-users] Modem damaged?

[Dave Forrest <drf@xxxxxxxxxxxxx>]

After the recent storm induced power outage, my fax server died and I salvaged
the MultiTech MT5634ZPX modem.  I installed on a new machine but no smiles.  As
I don't know how to read the attached log, maybe someone could look at it and
advise if the modem has been hosed.

David Forrest                     e-mail   drf@xxxxxxxxxxxxx
Maple Park Development Corporation  http://www.maplepark.com
St. Louis, Missouri

Dec 15 10:03:31.38: [ 2860]: SESSION BEGIN 000000008 13149658952
Dec 15 10:03:31.38: [ 2860]: HylaFAX (tm) Version 4.3.1
Dec 15 10:03:31.38: [ 2860]: <-- [4:ATA\r]
Dec 15 10:03:41.61: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:41.61: [ 2860]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
Dec 15 10:03:41.61: [ 2860]: RECV FAX: begin
Dec 15 10:03:41.61: [ 2860]: <-- data [32]
Dec 15 10:03:41.61: [ 2860]: <-- data [2]
Dec 15 10:03:41.64: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:41.64: [ 2860]: <-- data [23]
Dec 15 10:03:41.64: [ 2860]: <-- data [2]
Dec 15 10:03:41.68: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:41.68: [ 2860]: <-- data [13]
Dec 15 10:03:41.68: [ 2860]: <-- data [2]
Dec 15 10:03:43.93: [ 2860]: --> [2:OK]
Dec 15 10:03:43.93: [ 2860]: <-- [9:AT+FRH=3\r]
Dec 15 10:03:44.20: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:45.86: [ 2860]: --> [2:OK]
Dec 15 10:03:45.86: [ 2860]: REMOTE TSI "Fax"
Dec 15 10:03:45.86: [ 2860]: <-- [9:AT+FRH=3\r]
Dec 15 10:03:45.91: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:46.27: [ 2860]: --> [2:OK]
Dec 15 10:03:46.27: [ 2860]: REMOTE wants 14400 bit/s
Dec 15 10:03:46.27: [ 2860]: REMOTE wants A4 page width (215 mm)
Dec 15 10:03:46.27: [ 2860]: REMOTE wants unlimited page length
Dec 15 10:03:46.27: [ 2860]: REMOTE wants 3.85 line/mm
Dec 15 10:03:46.27: [ 2860]: REMOTE wants 2-D MMR
Dec 15 10:03:46.27: [ 2860]: REMOTE wants T.30 Annex A, 256-byte ECM
Dec 15 10:03:46.27: [ 2860]: RECV training at v.17 14400 bit/s
Dec 15 10:03:46.27: [ 2860]: <-- [11:AT+FRM=145\r]
Dec 15 10:03:48.01: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:52.69: [ 2860]: <-- data [1]
Dec 15 10:03:52.71: [ 2860]: --> [10:NO CARRIER]
Dec 15 10:03:52.71: [ 2860]: MODEM No carrier
Dec 15 10:03:52.71: [ 2860]: RECV: TCF 2720 bytes, 0% non-zero, 2698 zero-run
Dec 15 10:03:52.71: [ 2860]: <-- [9:AT+FRS=7\r]
Dec 15 10:03:52.79: [ 2860]: --> [2:OK]
Dec 15 10:03:52.79: [ 2860]: TRAINING succeeded
Dec 15 10:03:52.79: [ 2860]: <-- [9:AT+FTH=3\r]
Dec 15 10:03:53.77: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:53.77: [ 2860]: <-- data [3]
Dec 15 10:03:53.77: [ 2860]: <-- data [2]
Dec 15 10:03:54.15: [ 2860]: --> [2:OK]
Dec 15 10:03:54.15: [ 2860]: <-- [11:AT+FRM=146\r]
Dec 15 10:03:54.85: [ 2860]: --> [8:+FCERROR]
Dec 15 10:03:54.85: [ 2860]: <-- [11:AT+FRM=146\r]
Dec 15 10:03:55.17: [ 2860]: --> [8:+FCERROR]
Dec 15 10:03:55.17: [ 2860]: <-- [9:AT+FRH=3\r]
Dec 15 10:03:55.65: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:56.66: [ 2860]: --> [10:NO CARRIER]
Dec 15 10:03:56.66: [ 2860]: MODEM No carrier
Dec 15 10:03:56.66: [ 2860]: <-- [9:AT+FRS=7\r]
Dec 15 10:03:58.46: [ 2860]: --> [2:OK]
Dec 15 10:03:58.46: [ 2860]: <-- [9:AT+FTH=3\r]
Dec 15 10:03:59.44: [ 2860]: --> [7:CONNECT]
Dec 15 10:03:59.44: [ 2860]: <-- data [3]
Dec 15 10:03:59.44: [ 2860]: <-- data [2]
Dec 15 10:03:59.84: [ 2860]: --> [2:OK]
Dec 15 10:03:59.84: [ 2860]: RECV send CRP (command repeat)
Dec 15 10:03:59.84: [ 2860]: <-- [9:AT+FRH=3\r]
Dec 15 10:04:06.84: [ 2860]: --> [0:]
Dec 15 10:04:06.84: [ 2860]: MODEM <Empty line>
Dec 15 10:04:06.84: [ 2860]: <-- data [1]
Dec 15 10:04:06.85: [ 2860]: --> [2:]
Dec 15 10:04:06.86: [ 2860]: --> [2:OK]
Dec 15 10:04:06.86: [ 2860]: <-- data [1]
Dec 15 10:04:07.06: [ 2860]: MODEM <Timeout>
Dec 15 10:04:07.06: [ 2860]: Failed to properly detect high-speed data carrier.
Dec 15 10:04:07.06: [ 2860]: RECV FAX (000000008): recvq/fax000000008.tif from Fax, route to <unspecified>, 0 pages in 0:26
Dec 15 10:04:07.06: [ 2860]: RECV FAX: Failed to properly detect high-speed data carrier.
Dec 15 10:04:07.06: [ 2860]: <-- [9:AT+FTH=3\r]
Dec 15 10:04:08.04: [ 2860]: --> [7:CONNECT]
Dec 15 10:04:08.04: [ 2860]: <-- data [3]
Dec 15 10:04:08.04: [ 2860]: <-- data [2]
Dec 15 10:04:08.42: [ 2860]: --> [2:OK]
Dec 15 10:04:08.42: [ 2860]: RECV FAX (000000008): session with Fax terminated abnormally: Failed to properly detect high-speed data carrier.
Dec 15 10:04:08.42: [ 2860]: RECV FAX: bin/faxrcvd "recvq/fax000000008.tif" "ttyS1" "000000008" "Failed to properly detect high-speed data carrier."
Dec 15 10:04:08.42: [ 2860]: RECV FAX: end
Dec 15 10:04:08.42: [ 2860]: SESSION END