Re: [hylafax-users] Waiting for modem to come ready

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Forgive the top-post, but I wanted to quote the entirety of your 
message, because it seemed relevant for future archive searches.

You are the first person that I've heard of to get as far as you have 
with an i536ep modem for HylaFAX use.  Normally people have trouble at 
the driver-install portion.

In any case the prototype that faxaddmodem pulled was most likely not 
right for your modem.  Take your modem config file and strip it down to 
the bare minimum as far as the modem configuration items generally found 
at the bottom of the modem config file... to this:

 ModemType:              Class1

Yes, just that one line for the modem configuration part.  Then restart 
faxgetty and see how things go.

Lee.


Ted To wrote:

> I installed HylaFax on a Ubuntu/Dapper server.  The modem is a Intel 
> 536ep chipset and the driver seems to work.  (I got minicom to dial my 
> cell phone for example.)  But I can't seem to get HylaFax to work.  
> Any help would be much appreciated.
>
> The output for faxstat is always:
> HylaFAX scheduler on localhost.localdomain: Running
> Modem 536ep0 (+1.xxx.xxx.xxxx): Waiting for modem to come ready
> probemodem gives me output that does not look out of line:
> Now we are going to probe the tty port.  This takes a few seconds,
> so be patient.  Note that if you do not have the modem cabled to
> the port, or the modem is turned off, this may hang (just go and
> cable up the modem or turn it on, or whatever).
>
> Probing for best speed to talk to modem: 38400 OK.
>
> This looks like a Class 1 modem.
>
> ATI0    RESULT = "OK"   RESPONSE = "OK"
> ATI1    RESULT = "OK"   RESPONSE = "Intel 536EP Data Fax"
> ATI2    RESULT = "OK"   RESPONSE = "Intel Corporation"
> ATI3    RESULT = "OK"   RESPONSE = "536EP"
> ATI4    RESULT = "OK"   RESPONSE = "536EP PRE-Release 4.81.18.0 
> <http://4.81.18.0>  - Jul 26 2005 - 09:58:53"
> ATI5    RESULT = "OK"   RESPONSE = "V.92 Capable Modem"
> ATI6    RESULT = "OK"   RESPONSE = "DSP Patch Level:09.89"
> ATI7    RESULT = "OK"   RESPONSE = "OK"
> ATI8    RESULT = "OK"   RESPONSE = "OK"
> ATI9    RESULT = "OK"   RESPONSE = "OK"
>
> Class 1 stuff...
>
> AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,8"
> AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
> AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
> AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
> AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
> AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
> AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
> AT+FAA=?        RESULT = "OK"   RESPONSE = "(0-1)"
> AT+FAA? RESULT = "OK"   RESPONSE = "0"
> AT+FAE=?        RESULT = "OK"   RESPONSE = "(0-1)"
> AT+FAE? RESULT = "OK"   RESPONSE = "0"
> AT+FTH=?        RESULT = "OK"   RESPONSE = "3"
> AT+FRH=?        RESULT = "OK"   RESPONSE = "3"
> AT+FTM=?        RESULT = "OK"   RESPONSE = 
> "24,48,72,73,74,96,97,98,121,122,145,146"
> AT+FRM=?        RESULT = "OK"   RESPONSE = 
> "24,48,72,73,74,96,97,98,121,122,145,146"
> AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
> AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*