[hylafax-users] Re[2]: How to use two IP-numbers on one modem?

[Алексей Бологов <toolar@xxxxxxx>]

Kind time of day, Lee.
Forgive for the long answer. In your previous letters was a lot of useful. But it seems to me, that you not truly have understood me.
There is a server on which are install Hylafax and Avantfax. On server two IP numbers are configured (let it will be number "12345" and "67890"). I wish to divide reception of faxes under these numbers. That is what when I call on number "12345" my fax got ONLY on ttyx0, and calls on number "67890" got ONLY on ttyx1 (and then Avantfax send fax to the concrete user - and ) 
Here what my problem.

-----Original Message-----
From: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
To: Алексей Бологов<toolar@xxxxxxx>
Date: Wed, 15 Nov 2006 09:24:00 -0800
Subject: Re: [hylafax-users] How to use two IP-numbers on one modem?

> 
> Алексей Бологов wrote:
> 
> >I can not find where change "ModemGroup".
> >
> 
> Search for modem group in the man page:
> 
>   http://hylafax.sourceforge.net/man/hylafax-config.php
> 
> ModemGroup goes in your faxq config file (usually 
> /var/spool/hylafax/etc/config) and will not likely be found there, by 
> default.
> 
> Lee.
> 

-----Original Message-----
From: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
To: Алексей Бологов<toolar@xxxxxxx>
Date: Tue, 14 Nov 2006 22:21:22 -0800
Subject: Re: [hylafax-users] How to use two IP-numbers on one modem?

> 
> Алексей Бологов wrote:
> 
> >One real modem is connected to a server with Hylafax. On the server two virtual modems (ttyx0 and ttyx1) for two various IP-numbers are configured. 
> >I would like, what calling on one of these numbers I got on certain ttyx. 
> >But if I calling on one of thet numbers, I serially get on two modems (ttyx0, then ttyx1, then ttyx0, then ttyx1, and so on).
> >How I can solve this problem?
> >
> 
> Put ttyx1 and ttyx0 into a ModemGroup without the real modem and then, 
> when submitting faxes specify the ModemGroup as the modem to use.  
> Either that, or remove the real modem from the "any" ModemGroup.
> 
> As long as you leave both t38modems' ModemPriority values the same 
> (default) then faxq will, by default, use them in rotation (load balancing).
> 
> Lee.
> 

С уважением, Алексей.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*