[hylafax-users] Fw: IAXModem + Hylafax (No Local Dialtone.)

["Joshua Nunn" <jnunn@xxxxxxxxxxxx>]

   I did.  I get nothing at all on the CLI, unfortunately.

   Hence why I included my extensions.conf and other configs in hopes of
determining what's going on.

   Iaxmodem1-4 is correctly registered and my inittabs bind my
config.iaxymodems to ttyIAX0,1,2,3 and I've tried it with and without the
"Host" options.

   I'm guessing/thinking/hoping that sending it to device "ttyIAX0" should
cause "iaxmodem1" to make a call in it's own context, which has code for
calling out, via exten => _X.

 Joshua Nunn
   Network Manager
   Cypress Telecommunications
 ----- Original Message ----- 
 From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
 To: "Joshua Nunn" <jnunn@xxxxxxxxxxxx>
 Cc: <hylafax-users@xxxxxxxxxxx>
 Sent: Thursday, August 24, 2006 11:51 AM
 Subject: Re: [hylafax-users] IAXModem + Hylafax (No Local Dialtone.)


 > Joshua Nunn wrote:
 >
 > >   When I run it through my script I keep getting emails that says "No
 > > local dialtone detected."
 >
 >
 > This means that the PBX is rejecting the calls from iaxmodem.  Watch the
 > PBX's CLI when a call happens for the best information on why the PBX is
 > doing that.
 >
 > Lee.
 >
 > ____________________ HylaFAX(tm) Users Mailing List
 _______________________
 >   To subscribe/unsubscribe, click
 http://lists.hylafax.org/cgi-bin/lsg2.cgi
 >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
 /dev/null
 >   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
 >
 >



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*