Re: [hylafax-users] Unreadable sent faxes - transmit speed?

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Ilyés László wrote:

> > Ilyés László wrote:
> >
> >    
> >
> > > Faxes sent to distance numbers are almost unreadable, many rows are
> > > missing. Success confirmation e-mail states faxes are sent with 14kbps
> > > i think this is the problem. I tried to use desiredspeed option in
> > > several different config files, but it's still using 14kbps. (no
> > > errors in syslog)
> > >
> > >      
> > Please send us the session log (/var/spool/hylafax/log/...)
> >    

Your log indicates that the receiver does not support ECM and confirmed 
the fax page receipt as "acceptable quality" when sent at V.17 14400.

The *best* thing would be for the receiver to get ECM supported or to 
increase the threshold for "acceptable quality".  But, since you 
probably cannot do much about those things...

Please do try with V.29 9600.  With sendfax you do that like this:

 sendfax -B 9600 -d 0623394562

(adding the -B 9600).  If you're not using sendfax then you'd set 
DesiredBR to 3 in DestControls or JobControl (depending on if you're 
using 4.3.0 or not) for that destination.  See 'man destctrls' or 'man 
jobcontrol'.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*