Re: [hylafax-users] Multiport fax cards

["John Warren" <jwarren@xxxxxxxxxxxxx>]

Andrew,

No problem tooting your own horn;) 

I do have a question. Will the mainpine boards detect caller-id out of the box
when use with Hylafax? That could be very useful as we wouldn't have to rely
on the sender having their fax correctly configured. If we want to force the
sender to pass CLID we can always put a no-CLID block in place.



-----Original Message-----
From: andrew rinaldi [mailto:andrew.rinaldi@xxxxxxxxxxxx] 
Sent: Thursday, June 15, 2006 3:02 AM
To: 'Neil Doody'; 'John Warren'; hylafax-users@xxxxxxxxxxx
Subject: RE: [hylafax-users] Multiport fax cards


> 2) Multi-Tech MultiModemISI 5634UPCI/8 Data/Fax Modem 8 analog ports

This is a full length 'dinosaur'... If you want a card that you can put into
a modern PC then I would suggest you take a look at the OCTO+;

http://www.mainpine.com/downloads/DS2024_2_US.PDF

Regards

ANDREW RINALDI
Mainpine Ltd. Support
USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*