Re: [hylafax-users] FaxDispatch problem (faxrcvd)

[Dariusz Dwornikowski <tdi@xxxxxxxxx>]

>>
>>    We are developing a fax2mail solution for a voip company using
>> hylafax 4.3.0 and asterisks with iaxmodem.
>>    The problem we encountered is that sometimes ( quite often ) we get
>> empty CALLIDs.
>>  The control flow is as follows:
>>    -  faxrcvd runs FaxDispatch with $FILE, $FILENAME, $SPOOL and
>> $CALLID1, $CALLID4 arguments
>>    in FaxDispatch we run our own perl script for emailing faxsimiles.
>>
>> And the porblem is that $CALLID1 and $CALLID4 are empty.
>>
>
> What does your HylaFAX modem config file (for iaxmodem) look like?
CountryCode:            48
AreaCode:               91
FAXNumber:              +48.61.6229000
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0xFFF
SessionTracing:         0xFFF
RecvFileMode:           0666
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "FAX0"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           200
ModemType:              Class1          # use this to supply a hint
ModemResetCmds:         AT+VCID=1       # enables CallID display
Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT response
Class1RMQueryCmd:       "!24,48,72,96"  # V.17 fast-train recv doesn't
work well
CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:          "ANID="
CallIDPattern:          "NDID="

-- 
Pozdrowienia,
Dariusz Dwornikowski  -  Programista UNIX
Vercom


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*