Re: [hylafax-users] Connect to Hylafax on privat IP from the Internet

[Bojan Stojanovic <bojan.stojanovic@xxxxxxxxxxxxx>]

You "should" disable your firewall to server or if you have public IP on
your client you should disable "passive FTP".

If You use passive FTP on WHFC then you must open wide port range on
server firewall since passive FTP requires secondary connection on some
radnom port range on server side... If you use active FTP on other hand,
only thing that you need to do is to allow all traffic from server's IP
on client's firewall.

On Mon, 2006-06-12 at 10:24 +0200, Klaus Rörig wrote:
> Hi folks,
> 
> my Hylafax is runnig fine now. But now I want to connect to the
> HylaFax-Server from the internet.
> 
> I configured a portforwarding on my firewall to forward port 4559 to my
> internal IP. WHCF finds the server, asks for a password an then hangs.
> After some time it says "Cannot connect to 192.168.51.30", wich is the
> internal IP of my server. How do I configure Hylafax to replay with my
> external IP?
> 
> Klaus
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 
> 
-- 
Bojan Stojanović
Network Co. A.D.
sistem administrator
tel: +381 11 2040 936



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*