Re: [hylafax-users] Adaptive answer, MT5634ZBA-V92 (was Receive problems with MT2834ZDX modems)

[Sam Przyswa <samp@xxxxxxxxxxxxxxxxx>]

Bill Campbell a écrit :

> Here's my config.ttyS0 file (which has debugging set fairly high):
>
> # start of config.ttyS0
> CountryCode:		1
> AreaCode:		206
> FAXNumber:		+1.206.555.5555
> LongDistancePrefix:	1
> InternationalPrefix:	011
> DialStringRules:	etc/dialrules
>
> ServerTracing:		32783
>
> SessionTracing:		32911
> RecvFileMode:		0600
> LogFileMode:		0600
>
> DeviceMode:		0600
> RingsBeforeAnswer:	1
> SpeakerVolume:		medium
>
> # Note: the vt100 is absolutely required with SuSE's /sbin/getty
> # or it ungracefully segfaults.  It's also necessary to have the
> # appropriate dx_speed entries in /etc/gettydefs or getty dies
> # giving no hint as to why.
> GettyArgs:		"-h %l dx_%s vt100"
>
> LocalIdentifier:	"(206) 555-5555"
> TagLineFont:		etc/lutRS18.pcf
> TagLineFormat:		"From %%l|%c|Page %%P of %%T"
> MaxRecvPages:		25
>
> # I was playing with distinctive ring.  This turns it off.
> ModemReadyCmds:	AT+VDR=0,0 
>
> # AT+FAA=1 isn't sufficient with the current MT5634ZBA-V92.
> ModemSetupAACmd:		AT%A1+FAA=1		
> ModemWaitForConnect:	yes
>  

I tried this but it's doesn't work for me, I tried Class1, Class2, 
Class2.1, no way to make the MT5634ZPX-PCI-U INTERNAL DATA/FAX/VOICE 
MODEM VERSION *1.32K* working in adaptive answer.

In  Class2 ModemSetupAACmd: AT+FAA=1 some fax calls are detected as DATA 
and mgetty is launched and the fax failed.

I tried this found in the Hylafax FAQ:

AdaptiveAnswer:          yes              # enable adaptive answer
AnswerRotary:            "fax data"       # answer for fax, then data
ModemAnswerCmd:          AT+FCLASS=1;A    # default is to answer as fax
ModemAnswerDataCmd:      ATH+FCLASS=0;A   # hangup and answer as data
Class1RecvIdentTimer:     10000            # timeout fax answer in 10 secs

Doesn't work to...

PLEASE give me the right setup to make this f...g MT5634ZPX-PCI-U modem 
working in adaptive answer mode.

I am loosing a good customer and I have to money back !!!

At this time there is no way to make it working in AA, *if you need the 
AdaptiveAnswer*  (fax and data call) *DON'T USE THIS MODEM !!!*

Sam.


--
Ce message a été vérifié par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a été trouvé.
MailScanner remercie transtec pour son soutien.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*