Re: [hylafax-users] no devices showing in faxstat

[Peter Verhoeven <Peter@xxxxxxxxxxxxxxxx>]

I actually got ttyG0 appearing in the faxstat status output now. All I did
was change the "GettyArgs:" in the config.ttyG0 to "" 

<5 mins later>

Ok, I've got them all appearing now, yee haa!

The problem was the run level in inittab. It was default to 5, to I changed
the faxgetty's to :2345: 

Thanks everyone

-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] 
Sent: Wednesday, 31 May 2006 10:47 AM
To: Peter Verhoeven
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] no devices showing in faxstat

Peter Verhoeven wrote:

>How do I know for sure? I did configure inittab to have this:
>
>t0:23:respawn:/usr/sbin/faxgetty ttyG0
>t1:23:respawn:/usr/sbin/faxgetty ttyG1
>t2:23:respawn:/usr/sbin/faxgetty ttyG2
>t3:23:respawn:/usr/sbin/faxgetty ttyG3
>t4:23:respawn:/usr/sbin/faxgetty ttyG4
>t5:23:respawn:/usr/sbin/faxgetty ttyG5
>t6:23:respawn:/usr/sbin/faxgetty ttyG6
>t7:23:respawn:/usr/sbin/faxgetty ttyG7
>  
>

Are there 8 faxgetty processes running now?  If not then 'init q'.

>But I also ran "faxmodem ttyG0" etc. Is this bad, does it conflict???  Note
>that this is a "send-only" environment.
>

No, it's not particularly bad, but it's unnecessary.  faxgetty usage 
obsoletes faxmodem.

Lee.
Disclaimer
****************************************************************************
**
This message contains privileged and confidential information intended only
for the use of the addressee named above.  If you are not the intended
recipient of this message, you are hereby notified that you must not
disseminate, copy, or take any action in reliance on it.  If you have
received this message in error, please notify Morris International
immediately and delete all copies. Any views expressed in this message are
those of the individual sender, except where the sender specifically states
them to be the views of Morris International.
****************************************************************************
**


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*