[hylafax-users] iaxmodem & hylafax, call is not answered?

[hylafax@xxxxxxxxxxxxxx]

Hi list!

I'm trying to setup iaxmodem and hylafax, both for the first time.

I downloaded iaxmodem and installed it according to the instructions. I 
guess iaxmodem is setup correctly because I see it registering the 
extensions at the server.

I installed hylafax 4.25 from rpm, used the (modified) example modem 
script with iaxmodem and copied it to /var/spool/hylafax/etc

Then I first started iaxmodem, then i run 'faxgetty ttyIAX' from the 
commandline. In my /var/log/messages I can see that faxgetty found 
ttyIAX because of the iaxmodem specific stuff.

However on an incoming call I get this in my /varlog/iaxmodem/ttyIAX0 :

[2006-05-23 13:54:08] Registration completed successfully.
[2006-05-23 13:54:11] Unable to pass the full buffer onto the device file. 
2015 bytes of 2052 written: Invalid argument
[2006-05-23 13:54:11] Unable to pass the full buffer onto the device file. 
-1 bytes of 4026 written: Resource temporarily unavailable
etc. etc. etc.

What did I miss? I did not put faxgetty in inittab yet neither did I do 
any further configuration on inbound / outbound faxing.

These are my configs :

/etc/iaxmodem/ttyIAX0
device          /dev/ttyIAX
owner           uucp:uucp
mode            660
port            4570
refresh         300
server          127.0.0.1
peername        201
secret          1234
cidname         Fax1
cidnumber       00000000000
codec           alaw

/etc/iaxmodem/ttyIAX1
device          /dev/ttyIAX
owner           uucp:uucp
mode            660
port            4571
refresh         300
server          127.0.0.1
peername        202
secret          1234
cidname         Fax2
cidnumber       0000000000
codec           alaw


/var/spool/hylafax/etc/config.ttyIAX
DialStringRules:        etc/dialrules.europe
ServerTracing:          0xFFF
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "IAXmodem"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           200

ModemType:              Class1          # use this to supply a hint

ModemResetCmds:         "ATH1\nAT+VCID=1"       # enables CallID display
ModemReadyCmds:         ATH0

Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT 
response
Class1RMQueryCmd:       "!24,48,72,96"  # V.17 fast-train recv doesn't 
work well

CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:          "ANID="
CallIDPattern:          "NDID="



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*