HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] USR are buggy modems
Hello,
5630B specification on USR site says that this model supports Class 2.0
faxing. Have you tried it? It seems that bugs with USR/3com modems
mentioned in HylaFAX Handbook were related to modems with Class 2.0
capability...
--
Bojan Stojanovic
system administrator
Network Co. A.D.
Velizara Kosanovica 2
Belgrade, Serbia and Montenegro
Tel: +381 63 306 578
Fax: +381 11 2040 960
On Tue, 2006-05-16 at 13:32 +0000, bill.allison@xxxxxxxxx wrote:
> Hi
>
> We have 3 hylafax installations each with two USR modems running in Class
> 1. Not busy installations - up to 100 faxes per day of which 90% are
> incoming but we get as near as makes no difference 100% reliability.
> Modems are all model 5630B except one 5668-02. To get good reliability
> you *must* upgrade to latest firmware - 11.16.63 and 14.13.48
> respectively. We used ISDN2e (via the POTS ports on some old Eicon Diva
> ISDN modems). This wasn't really necessary for reliability except at one
> site where we had problems with a long PSTN line.
>
> The bottom line - we used USR modems just because we had some and with
> our setup they are 100% reliable.
>
> Hope this helps
> Regards
> Bill A.
>
>
>
> -----Original Message-----
> From: bojan.stojanovic@xxxxxxxxxxxxx
> Sent: 16 May 2006 12:03
> To: hylafax-users@xxxxxxxxxxx
> Cc: ivana.maksimovic@xxxxxxxxxxxxx
> Subject: [hylafax-users] USR are buggy modems?
>
>
>
>
> --------------------------------------------------------------------------
> --
> Hello everybody,
>
> Should I really avoid buying USR modems?
> They are most common external modems in Sebia and Montenegro market.
>
> Other alternatives that I have are Agere, SWEEX and Prolink external
> serial modems.
>
> http://www.hylafax.org/content/Handbook:Basic_Server_Configuration:Choosin
> g_a_
> Modem
>
> "Also in the functional-but-buggy category are USR/3Com modems; they
> tend to work better in Class 1 than in Class 2.0, but it still isn't
> ideal. (USR doesn't seem to be fixing these things, either.) If you use
> one of these modems and experience problems do not be surprised to learn
> that it is an issue with the modem itself."
>
> --
> Bojan Stojanovic
> system administrator
> Network Co. A.D.
> Velizara Kosanovica 2
> Belgrade, Serbia and Montenegro
> Tel: +381 63 306 578
> Fax: +381 11 2040 960
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
> /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
> [[ BILLAL~1.VCF : 3110 in BILLAL~1.VCF ]]
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*