[hylafax-users] Sendin international fax : [5:ERROR], MODEM Command error, FCS error, MODEM <Empty line>, MODEM <Timeout>, No response to PPS repeated 3 times, SESSION END

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Sendin international fax : [5:ERROR], MODEM Command error, FCS error, MODEM <Empty line>, MODEM <Timeout>, No response to PPS repeated 3 times, SESSION END
From: 2JS <2js@xxxxxxxxxx>
Date: Tue, 04 Apr 2006 07:20:33 +0200

Hello,

I got the error sometime when i send a international fax.

Best regards,

Jean-Jacques



avr 03 18:36:47.50: [ 6837]: SESSION BEGIN 000000048 39049717944
avr 03 18:36:47.50: [ 6837]: HylaFAX (tm) Version 4.2.5.5
avr 03 18:36:47.50: [ 6837]: SEND FAX: JOB 19 DEST 0039049717944 COMMID
000000048 DEVICE '/dev/ttySHSF0' FROM 'faxuser <info@xxxxxxxx>' USER fa
xuser
avr 03 18:36:47.50: [ 6837]: <-- [12:AT+FCLASS=1\r]
avr 03 18:36:47.53: [ 6837]: --> [2:OK]
avr 03 18:36:47.53: [ 6837]: DIAL 0039049717944
avr 03 18:36:47.53: [ 6837]: <-- [18:ATDT0039049717944\r]
avr 03 18:37:04.67: [ 6837]: --> [7:CONNECT]
avr 03 18:37:05.72: [ 6837]: --> [2:OK]
avr 03 18:37:05.72: [ 6837]: REMOTE NSF "00 00 25 00 00 00 12 50 0D 02 00 40
00 2A B0 28"
avr 03 18:37:05.72: [ 6837]: NSF remote fax equipment: Ricoh
avr 03 18:37:05.72: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:05.74: [ 6837]: --> [7:CONNECT]
avr 03 18:37:06.44: [ 6837]: --> [2:OK]
avr 03 18:37:06.44: [ 6837]: REMOTE NSF "00 00 25 01 41 50 53 20 41 5A 5A 41
52 4F 43 20 48 43 43 41 53"
avr 03 18:37:06.44: [ 6837]: NSF remote fax equipment: Ricoh
avr 03 18:37:06.44: [ 6837]: NSF remote station ID: "SACCH CORAZZA SPA"
avr 03 18:37:06.44: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:06.46: [ 6837]: --> [7:CONNECT]
avr 03 18:37:07.16: [ 6837]: --> [2:OK]
avr 03 18:37:07.16: [ 6837]: REMOTE CSI "0498961402"
avr 03 18:37:07.16: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:07.18: [ 6837]: --> [7:CONNECT]
avr 03 18:37:07.42: [ 6837]: --> [2:OK]
avr 03 18:37:07.42: [ 6837]: REMOTE best rate 9600 bit/s
avr 03 18:37:07.42: [ 6837]: REMOTE max A4 page width (215 mm)
avr 03 18:37:07.42: [ 6837]: REMOTE max unlimited page length
avr 03 18:37:07.42: [ 6837]: REMOTE best vres 7.7 line/mm
avr 03 18:37:07.42: [ 6837]: REMOTE format support: MH, MR, MMR
avr 03 18:37:07.42: [ 6837]: REMOTE supports T.30 Annex A, 256-byte ECM
avr 03 18:37:07.42: [ 6837]: REMOTE best 10 ms/scanline
avr 03 18:37:07.42: [ 6837]: USE 9600 bit/s
avr 03 18:37:07.42: [ 6837]: USE error correction mode
avr 03 18:37:07.42: [ 6837]: SEND file "docq/doc19.ps;f1"
avr 03 18:37:07.42: [ 6837]: USE A4 page width (215 mm)
avr 03 18:37:07.42: [ 6837]: USE unlimited page length
avr 03 18:37:07.42: [ 6837]: USE 7.7 line/mm
avr 03 18:37:07.42: [ 6837]: USE 2-D MMR
avr 03 18:37:07.42: [ 6837]: USE 0 ms/scanline
avr 03 18:37:07.42: [ 6837]: SEND training at v.29 9600 bit/s
avr 03 18:37:07.42: [ 6837]: <-- [9:AT+FRS=7\r]
avr 03 18:37:07.58: [ 6837]: --> [2:OK]
avr 03 18:37:07.58: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:07.90: [ 6837]: --> [7:CONNECT]
avr 03 18:37:07.90: [ 6837]: <-- data [23]
avr 03 18:37:07.90: [ 6837]: <-- data [2]
avr 03 18:37:09.48: [ 6837]: --> [7:CONNECT]
avr 03 18:37:09.48: [ 6837]: <-- data [7]
avr 03 18:37:09.48: [ 6837]: <-- data [2]
avr 03 18:37:09.99: [ 6837]: --> [2:OK]
avr 03 18:37:09.99: [ 6837]: <-- [9:AT+FTS=7\r]
avr 03 18:37:10.14: [ 6837]: --> [2:OK]
avr 03 18:37:10.14: [ 6837]: <-- [10:AT+FTM=96\r]
avr 03 18:37:10.17: [ 6837]: --> [7:CONNECT]
avr 03 18:37:10.17: [ 6837]: <-- data [1024]
avr 03 18:37:10.17: [ 6837]: <-- data [776]
avr 03 18:37:10.17: [ 6837]: <-- data [2]
avr 03 18:37:12.17: [ 6837]: --> [2:OK]
avr 03 18:37:12.17: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:12.64: [ 6837]: --> [7:CONNECT]
avr 03 18:37:13.80: [ 6837]: --> [2:OK]
avr 03 18:37:13.80: [ 6837]: TRAINING succeeded
avr 03 18:37:13.80: [ 6837]: SEND begin page
avr 03 18:37:13.80: [ 6837]: SEND EOFB
avr 03 18:37:13.80: [ 6837]: SEND send frame number 0
avr 03 18:37:13.80: [ 6837]: SEND send frame number 1
avr 03 18:37:13.80: [ 6837]: SEND send frame number 2
avr 03 18:37:13.80: [ 6837]: SEND send frame number 3
avr 03 18:37:13.80: [ 6837]: SEND send frame number 4
avr 03 18:37:13.80: [ 6837]: SEND send frame number 5
avr 03 18:37:13.80: [ 6837]: <-- [9:AT+FRS=7\r]
avr 03 18:37:13.96: [ 6837]: --> [2:OK]
avr 03 18:37:13.96: [ 6837]: <-- [10:AT+FTM=96\r]
avr 03 18:37:14.28: [ 6837]: --> [7:CONNECT]
avr 03 18:37:14.28: [ 6837]: <-- data [1033]
avr 03 18:37:14.28: [ 6837]: <-- data [872]
avr 03 18:37:14.28: [ 6837]: <-- data [2]
avr 03 18:37:16.39: [ 6837]: --> [2:OK]
avr 03 18:37:16.39: [ 6837]: <-- [9:AT+FTS=9\r]
avr 03 18:37:16.56: [ 6837]: --> [2:OK]
avr 03 18:37:16.56: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:16.58: [ 6837]: --> [7:CONNECT]
avr 03 18:37:16.58: [ 6837]: <-- data [7]
avr 03 18:37:16.58: [ 6837]: <-- data [2]
avr 03 18:37:17.96: [ 6837]: --> [2:OK]
avr 03 18:37:17.96: [ 6837]: SEND send PPS (partial page signal)
avr 03 18:37:17.96: [ 6837]: SEND send EOP (no more pages or documents)
avr 03 18:37:17.96: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:18.11: [ 6837]: --> [7:CONNECT]
avr 03 18:37:18.24: [ 6837]: --> [5:ERROR]
avr 03 18:37:18.24: [ 6837]: MODEM Command error
avr 03 18:37:18.24: [ 6837]: FCS error
avr 03 18:37:18.24: [ 6837]: <-- [9:AT+FRS=7\r]
avr 03 18:37:18.38: [ 6837]: --> [2:OK]
avr 03 18:37:18.38: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:19.94: [ 6837]: --> [7:CONNECT]
avr 03 18:37:19.94: [ 6837]: <-- data [3]
avr 03 18:37:19.94: [ 6837]: <-- data [2]
avr 03 18:37:21.24: [ 6837]: --> [2:OK]
avr 03 18:37:21.24: [ 6837]: SEND send CRP (command repeat)
avr 03 18:37:21.24: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:21.38: [ 6837]: --> [7:CONNECT]
avr 03 18:37:21.51: [ 6837]: --> [5:ERROR]
avr 03 18:37:21.51: [ 6837]: MODEM Command error
avr 03 18:37:21.51: [ 6837]: FCS error
avr 03 18:37:21.51: [ 6837]: <-- [9:AT+FRS=7\r]
avr 03 18:37:21.66: [ 6837]: --> [2:OK]
avr 03 18:37:21.66: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:23.12: [ 6837]: --> [7:CONNECT]
avr 03 18:37:23.13: [ 6837]: <-- data [3]
avr 03 18:37:23.13: [ 6837]: <-- data [2]
avr 03 18:37:24.42: [ 6837]: --> [2:OK]
avr 03 18:37:24.42: [ 6837]: SEND send CRP (command repeat)
avr 03 18:37:24.42: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:24.56: [ 6837]: --> [7:CONNECT]
avr 03 18:37:24.68: [ 6837]: --> [5:ERROR]
avr 03 18:37:24.68: [ 6837]: MODEM Command error
avr 03 18:37:24.68: [ 6837]: FCS error
avr 03 18:37:24.68: [ 6837]: <-- [9:AT+FRS=7\r]
avr 03 18:37:24.83: [ 6837]: --> [2:OK]
avr 03 18:37:24.83: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:25.15: [ 6837]: --> [7:CONNECT]
avr 03 18:37:25.15: [ 6837]: <-- data [3]
avr 03 18:37:25.15: [ 6837]: <-- data [2]
avr 03 18:37:26.44: [ 6837]: --> [2:OK]
avr 03 18:37:26.44: [ 6837]: SEND send CRP (command repeat)
avr 03 18:37:26.44: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:26.59: [ 6837]: --> [7:CONNECT]
avr 03 18:37:26.71: [ 6837]: --> [5:ERROR]
avr 03 18:37:26.71: [ 6837]: MODEM Command error
avr 03 18:37:26.71: [ 6837]: FCS error
avr 03 18:37:26.71: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:27.04: [ 6837]: --> [7:CONNECT]
avr 03 18:37:27.04: [ 6837]: <-- data [7]
avr 03 18:37:27.04: [ 6837]: <-- data [2]
avr 03 18:37:28.45: [ 6837]: --> [2:OK]
avr 03 18:37:28.45: [ 6837]: SEND send PPS (partial page signal)
avr 03 18:37:28.45: [ 6837]: SEND send EOP (no more pages or documents)
avr 03 18:37:28.45: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:28.60: [ 6837]: --> [7:CONNECT]
avr 03 18:37:28.73: [ 6837]: --> [5:ERROR]
avr 03 18:37:28.73: [ 6837]: MODEM Command error
avr 03 18:37:28.73: [ 6837]: FCS error
avr 03 18:37:28.73: [ 6837]: <-- [9:AT+FRS=7\r]
avr 03 18:37:28.88: [ 6837]: --> [2:OK]
avr 03 18:37:28.88: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:29.20: [ 6837]: --> [7:CONNECT]
avr 03 18:37:29.20: [ 6837]: <-- data [3]
avr 03 18:37:29.20: [ 6837]: <-- data [2]
avr 03 18:37:30.49: [ 6837]: --> [2:OK]
avr 03 18:37:30.49: [ 6837]: SEND send CRP (command repeat)
avr 03 18:37:30.49: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:30.64: [ 6837]: --> [7:CONNECT]
avr 03 18:37:30.76: [ 6837]: --> [5:ERROR]
avr 03 18:37:30.76: [ 6837]: MODEM Command error
avr 03 18:37:30.76: [ 6837]: FCS error
avr 03 18:37:30.76: [ 6837]: <-- [9:AT+FRS=7\r]
avr 03 18:37:30.91: [ 6837]: --> [2:OK]
avr 03 18:37:30.91: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:31.23: [ 6837]: --> [7:CONNECT]
avr 03 18:37:31.23: [ 6837]: <-- data [3]
avr 03 18:37:31.23: [ 6837]: <-- data [2]
avr 03 18:37:32.52: [ 6837]: --> [2:OK]
avr 03 18:37:32.52: [ 6837]: SEND send CRP (command repeat)
avr 03 18:37:32.52: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:35.62: [ 6837]: --> [0:]
avr 03 18:37:35.62: [ 6837]: MODEM <Empty line>
avr 03 18:37:35.62: [ 6837]: <-- data [1]
avr 03 18:37:35.82: [ 6837]: MODEM <Timeout>
avr 03 18:37:35.82: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:36.14: [ 6837]: --> [7:CONNECT]
avr 03 18:37:36.14: [ 6837]: <-- data [7]
avr 03 18:37:36.14: [ 6837]: <-- data [2]
avr 03 18:37:37.55: [ 6837]: --> [2:OK]
avr 03 18:37:37.55: [ 6837]: SEND send PPS (partial page signal)
avr 03 18:37:37.55: [ 6837]: SEND send EOP (no more pages or documents)
avr 03 18:37:37.55: [ 6837]: <-- [9:AT+FRH=3\r]
avr 03 18:37:40.65: [ 6837]: --> [0:]
avr 03 18:37:40.65: [ 6837]: MODEM <Empty line>
avr 03 18:37:40.65: [ 6837]: <-- data [1]
avr 03 18:37:40.85: [ 6837]: MODEM <Timeout>
avr 03 18:37:40.85: [ 6837]: No response to PPS repeated 3 times.
avr 03 18:37:40.85: [ 6837]: SEND end page
avr 03 18:37:40.85: [ 6837]: <-- [9:AT+FTH=3\r]
avr 03 18:37:41.16: [ 6837]: --> [7:CONNECT]
avr 03 18:37:41.17: [ 6837]: <-- data [3]
avr 03 18:37:41.17: [ 6837]: <-- data [2]
avr 03 18:37:42.46: [ 6837]: --> [2:OK]
avr 03 18:37:42.46: [ 6837]: <-- [5:ATH0\r]
avr 03 18:37:42.58: [ 6837]: --> [2:OK]
avr 03 18:37:42.58: [ 6837]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] Sendin international fax : [5:ERROR], MODEM Command error, FCS error, MODEM <Empty line>, MODEM <Timeout>, No response to PPS repeated 3 times, SESSION END
  - From: Lee Howard

References:
- [hylafax-users] lastDialFailure:"No carrier detected" - Asterisk + Hylafax via IAXModem
  - From: Pimjai Wesnarat

Prev by Date: Re: [hylafax-users] seeing a lot of "blocked" jobs since upgrading
Next by Date: Re: [hylafax-users] Sendin international fax : [5:ERROR], MODEM Command error, FCS error, MODEM <Empty line>, MODEM <Timeout>, No response to PPS repeated 3 times, SESSION END
Previous by thread: Re: [hylafax-users] lastDialFailure:"No carrier detected" - Asterisk + Hylafax via IAXModem
Next by thread: Re: [hylafax-users] Sendin international fax : [5:ERROR], MODEM Command error, FCS error, MODEM <Empty line>, MODEM <Timeout>, No response to PPS repeated 3 times, SESSION END
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions